Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

Black-Gold Two-Tone Silk PLA for 3D Printers | Filamento PLA Seda Bicolor – SSSray 1.75mm Filament for Award Trophies & Fluted Vase Décor
Lengthwise-segmented black-and-gold Silk PLA for trophy cups, spiral columns, fluted vases, décor brands, distributors, and private-label buyers.
Black and gold sections alternate along the filament length and print in sequence as the spool feeds, creating visible bands along the toolpath. This is a different effect from side-by-side co-extruded filament. SSSray supplies 1.75mm, 1kg spools with ±0.03mm diameter tolerance, vacuum-sealed packaging, and factory-direct wholesale and OEM support.
MOQ: Neutral packaging starts at 50 rolls; OEM packaging typically starts at 500–1,000 rolls.
Lead Time: Standard orders 7–15 days; customized orders 15–25 days.
Product Overview
SSSray Black-Gold Two-Tone Silk PLA is a decorative FDM/FFF filament developed for trophy, award, and décor printing. Opaque onyx-black and bright-gold sections alternate along the filament length, entering the hotend in sequence as the spool feeds and forming visible bands along the printed toolpath. Unlike side-by-side dual-color filament, this construction changes color as the material advances rather than placing both tones across the same strand cross-section. The silk surface gives both colors a reflective finish: gold catches bright highlights, while black shows softer gray-brown reflections.
Sequential Black-Gold Bands for Trophy & Décor Prints
For trophy stems, stepped cup bodies, and fluted vase walls, continuous outer-wall or spiral paths make the color transitions easier to follow across the finished surface. Band spacing varies with the filament section length, material consumption, model geometry, and toolpath. Print a representative sample on the target model before approving the appearance for a production range.
Key Selling Points
Lengthwise Black-Gold Sections
Onyx black and bright gold alternate along the filament, entering the print in sequence as material feeds through the nozzle.
Spiral Trophy Striping
Twisted stems, spiral columns, and stepped cup bodies turn sequential color changes into visible decorative bands.
Fluted-Vase Definition
Ribbed walls and curved vessel profiles give the changing black-gold sequence a strong surface to follow.
Opaque Silk Surface
Both tones are opaque and carry a silk sheen; gold catches pale highlights while black reflects soft gray-brown tones.
Controlled 1.75mm Format
Standard 1.75mm filament with a stated ±0.03mm diameter tolerance and a 1kg net spool.
Factory Wholesale & OEM
Neutral packaging starts at 50 rolls; OEM packaging programs typically start at 500–1,000 rolls.
From Sample Approval to Repeat Orders
Choose the Right Filament for the Finished Part
| Material | Surface / Color Effect | Typical Print Conditions | Material Behavior | Typical Applications |
|---|---|---|---|---|
| SSSray Black-Gold Sequential Silk PLA | Opaque black and gold sections alternate along the filament length; silk sheen on both colors | Nozzle 210–230°C; bed 50–60°C; 60–120mm/s standard profile, with high-speed tuning up to 200mm/s | PLA-based decorative filament; printed color bands follow the extrusion path | Trophy cups, spiral columns, fluted vases, lattice vessels, display décor |
| Standard PLA | Usually a single-color surface; finish depends on pigment and grade | Typically around 185–235°C nozzle and 50–60°C bed | General-purpose PLA profile with broad decorative and prototype use | Prototypes, models, everyday decorative prints |
| PLA+ / PLA Pro | Finish varies by formulation; commonly supplied in solid colors | Typically around 200–230°C nozzle and 45–60°C bed; follow the grade profile | Modified PLA formulations vary in toughness and flow behavior by supplier | General models and parts where a modified PLA grade is preferred |
| PETG | Often semi-gloss or glossy; clear and opaque grades are available | Typically around 230–250°C nozzle and 70–90°C bed; tune for the exact grade | More ductile than standard PLA in many formulations; moisture and stringing control matter | Functional housings, brackets, containers, and utility parts |
| ABS / ASA | Often matte or technical surface, depending on grade | Typically around 230–260°C nozzle and 90–110°C bed; an enclosure is commonly used | Higher-temperature processing; warping and ventilation management are important | Engineering parts; ASA is commonly selected for outdoor exposure |
Select the material around the finished part: this Black-Gold Silk PLA is built for decorative color bands and display surfaces, while PETG, ABS, and ASA serve different functional and thermal requirements.
Technical Specifications
| Product Name | Black-Gold Two-Tone Silk PLA for 3D Printers | Filamento PLA Seda Bicolor – SSSray 1.75mm Filament for Award Trophies & Fluted Vase Décor |
|---|---|
| Material | Silk PLA (Polylactic Acid) for FDM / FFF 3D printing |
| Product Series | SSSray PLA Silk Series – Sequential Black-Gold Line for Trophy Bands & Decorative Vessels |
| Color | Onyx Black & Bright Gold |
| Filament Construction | Alternating black and gold color sections along the filament length; sequential color feed during printing |
| Color Appearance | Opaque black and gold; both colors have a silk sheen. Gold highlights read as pale gold, while black reflects soft gray-brown tones. |
| Filament Diameter | 1.75mm standard |
| Diameter Tolerance | ±0.03mm |
| Net Filament Weight | 1kg |
| Gross Weight | 1.3kg |
| Spool Type | Plastic spool |
| Packaging | Vacuum-sealed bag with desiccant |
| Printing Technology | FDM / FFF |
| Recommended Nozzle | 0.4mm |
| Printer Compatibility | Most open-material 1.75mm FDM / FFF printers, subject to spool clearance, hotend condition, and slicer setup |
| Recommended Nozzle Temperature | 210–230°C |
| Recommended Bed Temperature | 50–60°C |
| Recommended Print Speed | 60–120mm/s standard; high-speed tuning range up to 200mm/s after flow calibration |
| Technical Documents | Request the current TDS / SDS and applicable market documents from the SSSray sales team. |
Recommended Print Settings
| Parameter | SSSray Starting Value | Performance / Tuning Range |
|---|---|---|
| Nozzle Diameter | 0.4mm | Use a clean nozzle; match diameter to the required detail and flow. |
| Nozzle Temperature | 210–230°C | 190–240°C after a temperature and extrusion check; adjust in 5°C steps. |
| Bed Temperature | 50–60°C | 45–60°C according to build plate and first-layer adhesion. |
| Overall Print Speed | 60–120mm/s | 120–200mm/s on high-flow systems after flow and temperature calibration. |
| Outer-Wall Speed | 30–50mm/s | 25–50mm/s; use the lower end for a more defined silk surface. |
| Retraction – Direct Drive | 0.8–1.2mm at 30–40mm/s | Fine-tune by extruder and hotend to control stringing without grinding. |
| Retraction – Bowden | 3–5mm at 30–40mm/s | Adjust to tube length, hotend path, and stringing result. |
| Layer Height | 0.16–0.20mm | 0.12–0.24mm with a 0.4mm nozzle, depending on detail and build time. |
| Part Cooling Fan | 100% after the first layers | 80–100%; maintain first-layer adhesion and check bridges and overhangs. |
| Wall Count | 3 perimeters | 2–4 perimeters according to vessel wall design and trophy geometry. |
| Infill | 15–20% for decorative models | 25–40% for larger display pieces; 40–60% for heavier trophy bases. |
| First-Layer Speed | 20–30mm/s | 15–30mm/s according to plate condition and first-layer stability. |
| Bed Adhesion | Textured PEI at 50–60°C | Smooth PEI or glass with a plate-compatible adhesive when required. |
These SSSray starting profiles are designed for practical throughput and a clean silk surface. Validate the selected profile on the target printer and keep the same layer height, line width, and toolpath when comparing color-band placement.
Control the Black-Gold Band Pattern
| Adjustment Point | SSSray Printing Guidance |
|---|---|
| Plan the Band Scale | Print a representative trophy stem or vase wall first. The visible band spacing follows the filament section length and the amount of material used along the toolpath. |
| Use Continuous Outer-Wall Paths | Where the model allows, use long continuous walls or spiral-vase paths to keep color transitions visually connected. |
| Keep the Toolpath Consistent | Use the same layer height, line width, wall count, and model orientation when comparing samples or approving a production profile. |
| Preserve Silk Gloss | Keep visible outer walls around 30–50mm/s; raise internal and infill speed after flow calibration. |
| Set Temperature & Flow | Start at 210–230°C and calibrate flow so both color sections extrude evenly through the same nozzle. |
| Control First-Layer Adhesion | Clean and level the build plate, set the first layer to 20–30mm/s, and match bed temperature to the plate surface. |
| Calibrate Retraction | Set Bowden and direct-drive systems separately. Adjust one parameter at a time to isolate stringing. |
Printer Brand Starting Settings
| Printer Brand | Setup Check |
|---|---|
| Bambu Lab | Start with a generic PLA profile. Check spool clearance and the selected build-plate profile; calibrate flow before increasing internal speed. |
| Prusa | Check first-layer adhesion on the selected PEI sheet and retain slower visible outer walls for a consistent silk finish. |
| Creality | Confirm whether the printer uses Bowden or direct-drive extrusion, then tune retraction before longer prints. |
| Anycubic | Check color-band placement with a small continuous-wall sample before using the filament on a production model. |
| Elegoo / Flashforge | Match hotend flow, build plate, cooling, and slicer settings to the specific printer model. |
These are model-dependent setup checks, not fixed printer presets. Use the SSSray starting ranges above and confirm hotend flow, spool clearance, build plate, and slicer setup on the target machine.
Applications
| Application Focus | How the Black-Gold Sequence Works |
|---|---|
| Sports Trophies & Award Cups | Sequential black-gold bands add a strong recognition-led finish to cup bodies, stems, handles, and decorative bases. |
| Spiral Columns & Twisted Trophy Stems | Continuous spiral paths make the changing color easy to read as the model rises. |
| Fluted Vases & Ribbed Vessels | Repeated ribs create a structured surface for alternating color zones across the vessel wall. |
| Diamond-Lattice Decorative Vessels | Open lattice geometry exposes more of the printed path, giving color transitions room to show across the structure. |
| Commemorative & Event Pieces | Use for branded display items, keepsakes, award accessories, and short-run event merchandise. |
| Retail Décor & Giftware Collections | Add a dedicated black-gold filament SKU for seasonal décor, statement vessels, and premium-looking gift products. |
Storage Guide
- Keep unopened spools in the original vacuum-sealed bag with the supplied desiccant until the first print.
- Store the spool in a cool, dry place away from direct sunlight and heat sources.
- After opening, return the filament to a sealed dry-storage bag or filament dry box with desiccant.
- For long prints or humid rooms, keep the spool protected from ambient moisture throughout the run.
- If popping, stringing, or rough extrusion appears, use a PLA-compatible drying cycle and stay within the spool’s heat tolerance.
OEM / ODM Services
SSSray works directly with distributors, wholesalers, importers, retailers, and private-label brands to build decorative PLA ranges around their target customers. For this black-gold sequential-color SKU, our team supports branded spool labels, retail boxes, neutral or OEM carton markings, barcode placement, packaging language, and coordinated color assortments. Share your target market, preferred pack format, and planned order volume; we will align the product specification and packaging route with your buying plan.
Factory order options: neutral packaging starts at 50 rolls; OEM packaging typically starts at 500–1,000 rolls. Standard production lead time is 7–15 days, with customized orders typically scheduled for 15–25 days.
SSSray Production & Quality Control
We check the product from filament extrusion through final packing, with attention to the dimensional and visual details that matter in a black-gold sequential-color spool.
- Material and batch identification: record the production material and lot for the ordered SKU.
- Diameter control: monitor the 1.75mm filament against the stated ±0.03mm tolerance.
- Color-section inspection: check the black-gold sequence, transition appearance, opacity, and silk surface against the approved reference.
- Winding and spool inspection: check winding presentation, spool condition, and filament-end retention.
- Weight verification: check the 1kg net filament weight and 1.3kg packed-unit gross weight.
- Packaging inspection: verify the vacuum seal, desiccant, product label, and approved carton configuration.
Technical Documents & Compliance Support
Our sales team helps match the correct technical and compliance documents to this SKU and your destination market. Share the product requirement and document scope so we can align the applicable revision with your order.
| Document | Buyer Use |
|---|---|
| Technical Data Sheet (TDS) | Product specification, color construction, dimensional information, and recommended printing window. |
| Safety Data Sheet (SDS / MSDS) | Material handling, storage, and safety information for purchasing and compliance teams. |
| RoHS / REACH Documentation | Product- and market-specific declarations for the applicable formulation and destination requirements. |
| SGS / Third-Party Test Reports | Third-party testing can be arranged for approved projects against a defined test scope. |
Frequently Asked Questions
What is the minimum order quantity?
Neutral packaging starts at 50 rolls. OEM packaging typically starts at 500–1,000 rolls, depending on the label, retail box, and customization scope.
How is the black-gold color arranged in the filament?
Onyx black and bright gold appear in alternating sections along the filament length. The colors enter the hotend in sequence as the spool feeds, creating bands along the printed toolpath.
Does this filament need a dual-extruder or multi-color printer?
No. The black-gold sequence is built into one 1.75mm filament strand, so it prints through a standard single-filament FDM / FFF material path without a second extruder or filament change.
How can I control the printed color-band pattern?
Band placement depends on the filament section length and the amount of material used along the model toolpath. Use a representative trophy stem or vase wall to evaluate the result, and keep the layer height, line width, and path consistent when comparing samples.
What print settings should I start with?
Start at 210–230°C nozzle temperature, 50–60°C bed temperature, and 60–120mm/s overall speed. High-speed systems can be tuned toward 120–200mm/s after flow calibration. Keep visible outer walls around 30–50mm/s for silk surface quality.
Can I request samples?
Qualified B2B buyers may request up to three 1kg sample rolls free of charge for product evaluation before a wholesale or OEM order. The sample product is free; shipping costs are paid by the buyer.
Build Your Black-Gold Trophy & Décor Range with SSSray
Bring a sequential black-gold Silk PLA option into your trophy, award, vase, and decorative-print range. Contact our factory team for bulk pricing, sample evaluation, or a private-label program built around your target market, order quantity, and packaging format.



