Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

SSSray Black & Orange Dual-Color Silk PLA 3D Printer Filament – filamento PLA bicolor for Decorative & Display Models
Sequential black-and-orange Silk PLA for decorative FDM prints, factory wholesale and private-label collections.
Jet-black and vivid-orange sections run in sequence along the filament length, creating color bands as the spool feeds through a standard single-filament FDM path. Factory-supplied in a 1.75mm, 1kg format with stated ±0.03mm diameter tolerance, vacuum-sealed packaging and B2B OEM support.
MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.
Lead Time: Standard orders 7–15 days; customized orders 15–25 days.
Product Overview
We manufacture SSSray Black & Orange Dual-Color Silk PLA for decorative FDM/FFF products that benefit from a changing color sequence and a reflective silk surface. Jet-black and vivid-orange sections run along the filament length and enter the hotend in sequence as the spool feeds, creating visible color bands along the printed toolpath. This is a lengthwise color transition, not a side-by-side co-extruded strand; the finished pattern develops through filament consumption, model geometry and the extrusion path. The glossy Silk surface adds reflected highlights to sculpted contours, raised details and curved walls, making this SKU a distinctive choice for low-poly animal busts, ornamental boxes, figurines, desk accessories and display décor.
From our filament factory in Jinhua, Zhejiang, China, we supply the standard 1.75mm, 1kg plastic-spool format with a stated ±0.03mm diameter tolerance and vacuum-sealed packaging with desiccant. Neutral-pack wholesale starts at 50 rolls, while OEM/private-label programs typically start at 500–1,000 rolls. Standard orders are scheduled for 7–15 days and customized projects for 15–25 days. Our team supports sample qualification, packaging artwork and bulk-order planning for distributors, importers and filament brands.
Sequential Black & Orange Color for Decorative Prints
This SKU creates its visual rhythm through color sections arranged along the filament length. As black and orange sections pass through the nozzle in sequence, the color changes follow the printed toolpath instead of appearing as two fixed faces on the same strand. Black gives sculpted forms visual depth; vivid orange adds a high-visibility accent across the model surface. On a low-poly fox bust, the transitions travel across angular planes and broad facets; on a baroque trinket box, they move through raised ornament, scrollwork and curved walls. Band placement is influenced by filament section length, material consumption, model size and toolpath, giving designers room to shape the final appearance through model choice and print planning.
Key Selling Points
Lengthwise Black–Orange Sections
Jet-black and vivid-orange sections feed through the nozzle in sequence, creating changing color bands from one spool.
High-Contrast Color Rhythm
Deep black and vivid orange give display pieces a recognizable visual sequence for decorative collections.
Silk-Gloss Surface
Reflective highlights bring definition to curved walls, raised details, sculpted contours and ornamental geometry.
Single-Filament Workflow
The sequential color effect prints through a standard single-filament path without a second material feed.
Controlled 1.75mm Format
Standard 1.75mm filament with a stated ±0.03mm diameter tolerance and a 1kg net spool.
Factory Wholesale & OEM
Neutral-pack supply, private-label packaging and project-based OEM/ODM support for B2B buyers.
Wholesale Buyer Checklist
| Item to Confirm | SSSray Product / Order Detail |
|---|---|
| Color approval | Review the black-and-orange sequence on a representative model. Visible band placement depends on filament section length, material use and the printed toolpath. |
| Printer compatibility | Standard 1.75mm FDM/FFF format. Check spool clearance and the starting profile on the printers used for production. |
| Dimensional check | Use the stated ±0.03mm diameter tolerance as the reference when evaluating samples and incoming material. |
| Standard packing | Each spool is supplied in a vacuum-sealed bag with desiccant. Keep the bag sealed until use and reseal the filament after opening. |
| Packaging selection | Choose neutral packaging or confirm retail-box, label and carton artwork for an OEM/private-label order. |
| Order quantity | Neutral packaging starts at 50 rolls; OEM packaging typically starts at 500–1,000 rolls. |
Planning This SKU for Your Product Range
The black-and-orange color sequence gives decorative assortments a distinct Silk PLA option for figurines, ornamental boxes, giftware and display pieces. The standard 1.75mm, 1kg spool format fits familiar FDM/FFF retail and wholesale ranges. Before confirming a bulk order, print a representative model to review the color-band placement and Silk finish, then select neutral packaging or confirm the private-label artwork for your market. Send our team your target quantity, destination port and packaging requirements for a quotation.
Our B2B Cooperation Process
Material Comparison Guide
| Material | Surface / Visual Character | Typical Print Conditions | Functional Characteristics | Typical Use |
|---|---|---|---|---|
| SSSray Sequential Black–Orange Silk PLA | Glossy Silk surface; black and orange color sections run sequentially along the filament length | Nozzle 210–230°C; bed 50–60°C; 60–120mm/s standard profile, with high-speed tuning up to 200mm/s after flow calibration | PLA-based decorative filament; color bands follow filament feed and the model toolpath | Low-poly models, figurines, ornamental boxes, display décor and giftware |
| Standard PLA | Usually matte to satin, depending on grade and color | Low-to-moderate nozzle and bed temperatures; broad FDM adoption | Easy general-purpose printing; limited heat resistance compared with engineering plastics | Prototypes, educational models, everyday prints |
| PLA+ / PLA Pro | Typically standard PLA-like surface, formulation dependent | Usually similar PLA-range temperatures; profile varies by brand | Modified formulations target different toughness or impact behavior; check grade-specific data | General models and parts requiring a tougher PLA formulation |
| PETG | Often glossy, with a different surface character from Silk PLA | Higher nozzle and bed temperatures than PLA in common profiles | Typically greater ductility and chemical/moisture resistance than PLA; stringing control is important | Functional housings, brackets and utility parts |
| ABS / ASA | Usually matte to satin, formulation dependent | Higher-temperature printing; enclosure and warping control commonly required | Higher service-temperature capability than PLA; ASA is selected for outdoor UV exposure | Engineering housings, automotive accessories, outdoor parts |
Material behavior varies by formulation and test method. Compare the exact grade-specific TDS before selecting a material for load-bearing, thermal or outdoor service.
Technical Specifications
| Product Name | SSSray Black & Orange Dual-Color Silk PLA 3D Printer Filament – filamento PLA bicolor for Decorative & Display Models |
|---|---|
| Material | Dual-Color Silk PLA (Polylactic Acid) |
| Series | SSSray PLA Silk Series – Dual-Color Decorative Collection |
| Color / Effect | Jet Black & Vivid Orange – High-Gloss Sequential Color Transition |
| Color Construction | Black and orange color sections arranged sequentially along the filament length; transitions follow filament feed during printing |
| Filament Diameter | 1.75mm standard; 2.85mm by request subject to SKU confirmation |
| Diameter Tolerance | ±0.03mm stated specification |
| Net Weight | 1kg per spool |
| Gross Weight | 1.3kg per packed spool |
| Spool Type | Plastic spool |
| Packaging | Vacuum-sealed bag with desiccant |
| Printer Compatibility | Most open-material 1.75mm FDM/FFF printers; validate the profile and spool fit before fleet-wide use |
| Recommended Nozzle | 0.4mm for the standard Silk PLA surface profile |
| Typical Applications | Decorative models, figurines, low-poly models, ornamental boxes and display pieces |
| Neutral-Pack MOQ | 50 rolls |
| OEM Packaging MOQ | Typically 500–1,000 rolls |
| Lead Time | Standard 7–15 days; customized 15–25 days |
| Trade Terms | FOB Ningbo / EXW Jinhua, Zhejiang, China |
| Technical Documents | Request the current SKU-matched TDS / SDS and applicable market documents from SSSray sales support |
Recommended Print Settings
| Parameter | SSSray Recommended Setting | Performance Range & Tuning Guidance |
|---|---|---|
| Nozzle Temperature | 210–230°C | 190–240°C after temperature and extrusion checks; adjust in 5°C steps for flow and silk finish. |
| Bed Temperature | 50–60°C | 45–60°C according to build plate and first-layer adhesion. |
| Overall Print Speed | 60–120mm/s | 120–200mm/s on high-flow systems after flow and temperature calibration. |
| Outer-Wall Speed | 30–50mm/s | 25–50mm/s; use the lower end for stronger silk gloss and more defined color bands. |
| Retraction – Direct Drive | 0.8–1.2mm at 30–40mm/s | Fine-tune by extruder and hotend to control stringing while maintaining steady extrusion. |
| Retraction – Bowden | 3–5mm at 30–40mm/s | Adjust to tube length and hotend path; avoid excessive retraction. |
| Layer Height | 0.16–0.20mm | 0.12–0.24mm with a 0.4mm nozzle, according to detail and build time. |
| Cooling Fan | 100% after the first layers | 80–100%; maintain first-layer adhesion and tune for bridges and overhangs. |
| Wall Count | 3 perimeters | 2–4 perimeters according to model geometry and handling requirements. |
| Infill | 15–20% for decorative models | 25–40% for larger display pieces; 40–60% for heavier bases and denser display parts. |
| First-Layer Speed | 20–30mm/s | 15–30mm/s according to plate condition and first-layer stability. |
| Bed Adhesion | Textured PEI at 50–60°C | Smooth PEI or glass with a plate-compatible adhesive when required. |
| Nozzle Size | 0.4mm | Preferred starting size for Silk PLA surface quality; validate other nozzle sizes against required detail and flow. |
| Drying When Required | 50°C for 6–8 hours | Use a PLA-suitable dryer and spool-safe setup; dry when moisture-related popping, stringing or rough extrusion appears. |
SSSray’s recommended profile balances productive print speed with a clean Silk surface. On high-flow systems, raise internal and infill speeds after flow calibration while keeping visible outer walls at 30–50mm/s for gloss and clear color transitions.
Print Optimization Guide
| Optimization Item | Practical Guidance |
|---|---|
| Plan the Black–Orange Bands | Color sections enter the print in sequence as the spool feeds. Use a representative model and consistent outer-wall paths; visible band spacing follows the filament section length and material used along the toolpath. |
| Preserve Silk Gloss | Keep visible outer walls around 30–50mm/s; raise internal and infill speeds after flow calibration to balance surface finish and throughput. |
| Improve Surface Uniformity | Use a 0.16–0.20mm layer height, consistent line width and calibrated flow to keep decorative walls even across color transitions. |
| Reduce Stringing | Calibrate retraction in small steps, keep travel paths optimized and dry the filament when moisture symptoms appear. |
| Secure First-Layer Adhesion | Clean the build plate, use a 50–55°C bed starting point and slow the first layer to 15–25mm/s. |
| Control Overhangs | Use 80–100% part cooling after the initial layers and reduce overhang speed when the geometry requires it. |
| Qualify Batch Consistency | Print the same reference model from each sample lot and compare color presentation, feeding, surface finish and dimensional results. |
Printer Brand Starting Settings
| Printer Platform | Nozzle | Bed | Overall Speed | Outer Wall | Setup Note |
|---|---|---|---|---|---|
| Bambu Lab | 200–220°C | 50–55°C | 40–70mm/s | 30–45mm/s | Start with a generic PLA/Silk profile; tune flow and outer-wall speed for gloss |
| Prusa | 200–215°C | 50–60°C | 40–65mm/s | 30–40mm/s | Use the standard PLA profile as a base and verify first-layer adhesion on PEI |
| Creality | 200–220°C | 45–60°C | 40–70mm/s | 35–45mm/s | Calibrate retraction for Bowden or direct-drive hardware before long prints |
| Flashforge | 200–220°C | 45–60°C | 40–70mm/s | 30–40mm/s | Begin with a 0.4mm nozzle for silk surface appearance and verify the build plate type |
| Anycubic / Elegoo | 200–220°C | 45–60°C | 40–70mm/s | 30–45mm/s | Use a generic PLA starting profile and tune against the actual printer and slicer |
These are conservative first-print values for the listed printer families. Once first-layer adhesion, flow and cooling are stable, increase internal and infill speeds toward the SSSray production range above while retaining slower outer walls for Silk gloss.
Material & Printing Characteristics
| Characteristic | Product Detail | Printing Consideration |
|---|---|---|
| Color Sequence | Jet-black and vivid-orange sections run sequentially along the filament length. | Visible band placement depends on filament section length, material consumption, model geometry and toolpath. |
| Silk Surface | High-gloss Silk PLA finish across the black and orange sections. | Moderate outer-wall speed brings out reflected highlights on curved and raised surfaces. |
| Filament Diameter | 1.75mm standard with stated ±0.03mm tolerance. | Provides a clear dimensional target for feeding setup and incoming quality checks. |
| Print Profile | Recommended nozzle 210–230°C; bed 50–60°C; standard speed 60–120mm/s. | High-flow systems can be tuned toward 200mm/s after temperature and flow calibration. |
| Cooling Behavior | 80–100% part cooling after initial layers; 100% is the recommended starting point. | Supports bridges, overhangs and defined decorative details while maintaining first-layer adhesion. |
| Warping Behavior | PLA-family processing with lower typical warping tendency than ABS/ASA in open-printer conditions. | Use a clean, level build plate and stable first-layer contact for larger models. |
| Application Fit | Silk PLA developed for decorative and general-purpose FDM/FFF models. | Well suited to display pieces, ornaments and giftware; select a material grade matched to high-heat or load-bearing service. |
Application Scenarios
| Application Focus | Practical Notes |
|---|---|
| Low-Poly Fox Busts & Sculptures | Faceted planes and broad surfaces let sequential black/orange bands travel across the sculpted form and show clearly in retail photography. |
| Baroque Trinket Boxes & Decorative Containers | Longer curved walls and raised scrollwork give the color sequence room to move across the surface while the Silk finish catches highlights. |
| Figurines & Character Models | Suitable for decorative figures, collectible-style models and tabletop display pieces. |
| Retail Giftware & Desk Accessories | A recognizable black-to-orange sequence gives gift lines and desktop décor a distinctive visual signature. |
| Creative Education & Design Demonstrations | Useful for teaching form, surface, color separation and FDM model presentation. |
| Display Props & Non-Load-Bearing Models | Choose PLA for visual models where high heat resistance or engineering load capacity is not the primary requirement. |
Storage Guide
- Keep the spool sealed in its original moisture-barrier bag with the supplied desiccant until use.
- After opening, return the filament to a sealed dry box or resealable moisture-barrier bag.
- Store in a cool, dry area away from direct sunlight and heat sources.
- For humid storage or visible stringing/foaming symptoms, use a PLA-suitable filament dryer and confirm the drying limit for the spool.
- Keep the filament end secured in the spool holes during storage to prevent tangling and crossed winding.
OEM / ODM Services
SSSray supports distributors, wholesalers, importers and private-label brands developing decorative filament assortments. Cooperation options include neutral packaging, custom product labels, branded retail boxes, carton marks, spool design options and project-based color coordination. Buyers can submit target-market requirements, packaging artwork and annual volume estimates for review before sample approval and production scheduling.
MOQ Reference: Neutral packaging starts from 50 rolls. OEM packaging typically starts at 500–1,000 rolls, depending on the packaging scope and confirmed production arrangement.
SSSray Production & Quality Control
We control the product from material and extrusion batches through spool winding and final packing. For this black-and-orange sequential Silk PLA, our checks focus on the dimensional, color and packing details that matter to repeat wholesale and OEM orders.
- Material and production-batch identification for order traceability.
- Filament diameter monitoring against the 1.75mm specification and stated ±0.03mm tolerance.
- Black/orange color-sequence and Silk-surface appearance review against the approved reference.
- Spool winding, spool condition and filament-end retention inspection.
- 1kg net-weight verification, vacuum-seal condition and desiccant inclusion checks.
- Final product label, carton marks and shipment-preparation review before dispatch.
Technical Documents & Compliance Support
SSSray supports B2B product qualification with technical and safety documentation matched to the supplied SKU and destination market. Our team coordinates the current TDS, SDS/MSDS and applicable compliance records for wholesale, import and private-label projects. Share your destination market and document checklist at quotation stage so the correct product revision and supporting files can be aligned with your order.
| Document / Record | Buyer Use |
|---|---|
| Technical Data Sheet (TDS) | Product composition category, dimensional specification and recommended printing window for SKU qualification. |
| Safety Data Sheet (SDS / MSDS) | Product handling, storage and safety information for purchasing and import documentation. |
| RoHS / REACH | Applicable declarations or test evidence for the supplied SKU and target market, where available. |
| CE / Market Conformity | Conformity documentation reviewed against the product category and destination-market requirements. |
| SGS / Third-Party Testing | Relevant third-party reports provided when available and applicable to the supplied material or batch. |
Frequently Asked Questions
What is the MOQ for this black-and-orange Silk PLA?
Neutral packaging starts from 50 rolls. OEM packaging typically starts from 500–1,000 rolls, depending on the customization scope and confirmed order arrangement.
How does the black-and-orange color transition work?
Black and orange color sections run sequentially along the filament length. As the spool feeds, each section passes through the nozzle in turn and creates bands along the printed toolpath. This is a lengthwise color sequence, not a side-by-side co-extruded strand, and it prints through a standard single-filament path.
Which printers can use this 1.75mm filament?
It is designed for most open-material 1.75mm FDM/FFF printers, including common Bambu Lab, Prusa, Creality, Flashforge, Anycubic and Elegoo platforms. Confirm spool fit, nozzle condition and the slicer profile on the target machine before production printing.
What print settings should I start with?
Start at 210–230°C nozzle temperature, 50–60°C bed temperature and 60–120mm/s overall speed. High-flow systems can be tuned toward 120–200mm/s after flow and temperature calibration. Keep visible outer walls around 30–50mm/s to bring out the Silk finish and color bands.
Can SSSray provide OEM or private-label packaging?
Yes. Available project options include custom labels, branded retail boxes, carton marks and selected spool-design options. OEM packaging generally starts from 500–1,000 rolls after artwork and specifications are approved.
Can I request samples before placing a bulk order?
Qualified B2B buyers can request up to 3 complimentary sample rolls after project review. Our sales team coordinates sample approval and dispatch arrangements with the buyer.
Can SSSray provide technical and compliance documents?
Yes. Our team coordinates the current TDS and SDS/MSDS for the supplied SKU, together with applicable compliance declarations or third-party reports available for your destination market and order scope.
What are the standard lead time and trade terms?
Standard orders are scheduled for 7–15 days and customized orders for 15–25 days. Trade terms are FOB Ningbo or EXW. Confirm the production calendar, payment schedule and shipping plan when the order specification is approved.
Source Black & Orange Silk PLA for Your Next Product Line
Request wholesale pricing, qualify the black-and-orange finish with samples, or discuss private-label packaging for your market. Send SSSray your target quantity, destination port and packaging requirements for a quotation.



