Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

SSSray 1.75mm Matte PLA in Blossom Pink: 3D Printer Filament for Planters & Scale Building Models – PLA Filament Matt Rosa
High-speed Blossom Pink matte PLA filament for decorative planters, architectural scale models and presentation production.
At SSSray, we supply Blossom Pink in a solid, opaque pastel tone with a warm candy-pink undertone and a soft matte finish. This high-speed PLA is developed for efficient FDM/FFF workflows while keeping the low-reflection appearance that brings fluted planters, faceted décor and architectural details into focus. Each standard unit uses 1.75mm filament, a 1kg net plastic spool and a stated ±0.03mm diameter tolerance, with vacuum-sealed packaging and desiccant. We manufacture this filament at our Jinhua, Zhejiang, China facility and support wholesale, distributor and private-label programs directly under the SSSray name.
MOQ: Neutral packaging from 50 spools; OEM packaging typically 500–1,000 spools.
Lead Time: For this SKU, standard orders are scheduled for 7–15 days; OEM/custom orders are scheduled for 15–25 days after color, artwork and packaging are approved.
Product Overview
SSSray Blossom Pink High-Speed Matte PLA is developed for FDM/FFF users who need faster production without giving up a clean, low-reflection surface. Its light-to-medium pastel pink carries a warm candy-pink undertone and a solid, opaque appearance; it is not a silk, metallic, fluorescent or gradient effect. The matte finish diffuses direct highlights, helping fluted planter walls, faceted profiles, window frames, stair details and curved architectural surfaces stay visually clear under display lighting.
We manufacture this SKU at our Jinhua, Zhejiang, China facility. Standard supply is 1.75mm diameter with a stated ±0.03mm tolerance, 1kg net filament weight and a plastic spool. The recommended production range is 150–250mm/s. SSSray has a SKU-specific print-test report documenting a 250mm/s test, available to B2B buyers on request. Each spool is vacuum-sealed with desiccant to help protect the filament during storage and transit. Neutral-packaging wholesale orders start at 50 spools, while OEM-branded packaging typically starts at 500–1,000 spools.
Product Highlights
Blossom Pink adds a warm, opaque pastel option to our matte PLA range for decorative cachepots, fluted planters, architectural miniatures and villa presentation models. The soft matte surface keeps reflected highlights subdued on curved and faceted geometry. We supply this SKU on 1kg spools, with neutral-packaging wholesale orders from 50 spools and OEM-branded packaging typically from 500–1,000 spools.
Key Selling Points
Soft Matte Surface
A low-reflection finish keeps display lighting from creating strong glossy highlights across fluted and faceted geometry.
Blossom Pink Color Identity
A light-to-medium pastel pink with a warm candy-pink undertone; solid and opaque with no gradient or metallic effect.
Stated ±0.03mm Tolerance
The stated ±0.03mm diameter tolerance gives purchasing teams a defined incoming specification for supplier qualification and batch checks.
High-Speed Production
Recommended for production profiles up to 250mm/s. SSSray has a SKU-specific print-test report for the 250mm/s test point; actual throughput depends on printer flow capacity, cooling and model geometry.
Vacuum-Sealed Unit Packing
A sealed bag with desiccant helps protect the filament from moisture exposure during storage and export handling.
Wholesale & Private Label
Neutral packaging starts at 50 spools; OEM packaging typically starts at 500–1,000 spools for distributor and brand programs.
Key Features
| Feature | Buyer Benefit |
|---|---|
| Blossom Pink, solid opaque color | Adds a recognisable pastel SKU to décor, model-making and retail filament assortments. |
| Soft matte surface finish | Reduces reflected highlights so decorative ribs, edges and architectural details remain easier to view. |
| 1.75mm nominal diameter | Fits the standard filament format used by most open-material FDM/FFF printer platforms. |
| ±0.03mm stated diameter tolerance | Provides a measurable incoming specification for supplier qualification and batch control. |
| 1kg net plastic spool | Uses a familiar retail unit size for distributor stock planning and e-commerce listings. |
| Vacuum-Sealed Packaging with Desiccant | Supports moisture protection during warehousing, transit and storage before opening. |
| Neutral / OEM packaging options | Allows buyers to test the color SKU before moving to branded packaging programs. |
| High-speed PLA formulation | Supports FDM production profiles up to 250mm/s. SSSray’s SKU-specific 250mm/s print-test report is available to B2B buyers for product qualification. |
Commercial Value for Wholesale Buyers
Blossom Pink gives distributors a warm, opaque matte-pink SKU for home décor, architectural model-making and presentation projects. The low-reflection finish keeps fluted, faceted and curved surfaces visually clear. For print farms and retail customers evaluating production throughput, SSSray’s documented 250mm/s print test provides a product-specific reference for qualification on compatible FDM equipment.
We keep the buying path straightforward: 1kg net spools, neutral packaging from 50 spools, and OEM-branded packaging typically from 500–1,000 spools. SSSray supports sample qualification before volume orders. For this SKU, standard orders are scheduled for 7–15 days after order details are confirmed; OEM/custom orders are scheduled for 15–25 days after color, artwork and packaging are approved. Buyers can add this pastel SKU to an existing 1.75mm FDM filament range.
How We Work
Material Comparison Guide
| Material | Surface / Appearance | Typical Applications | Typical Print Conditions | Material Difference |
|---|---|---|---|---|
| Matte PLA – Blossom Pink | Opaque pastel pink; low-reflection matte surface | Decorative planters, home décor, architectural scale models | 200–260°C nozzle; 50–60°C bed; 150–250mm/s recommended, with a SKU-specific 250mm/s print-test report available | Selected for visual presentation and easy-to-adopt PLA workflows; not an engineering-grade material. |
| Standard PLA | Usually smoother or glossier depending on formulation; broad color range | Prototypes, figures, education models and general display parts | Typically low-to-moderate nozzle and bed temperatures; strong part cooling | General-purpose PLA without this SKU’s specified matte pastel finish. |
| PETG | Often more reflective; can show stringing depending on profile | Functional housings, brackets and parts needing more toughness than PLA | Higher nozzle temperature; heated bed; tuned cooling and retraction | Generally offers greater impact tolerance and temperature capability than PLA, with different surface and tuning behavior. |
| ABS / ASA | Can be sanded or finished; surface depends on process | Enclosed-printer engineering parts; ASA for weather-exposed applications | Higher nozzle and bed temperatures; enclosure commonly recommended | Higher heat capability than PLA but greater shrinkage/warping management and ventilation considerations. |
Technical Specifications
| Product Name | SSSray 1.75mm Matte PLA in Blossom Pink: 3D Printer Filament for Planters & Scale Building Models – PLA Filament Matt Rosa |
|---|---|
| Material | Matte PLA (polylactic acid) for FDM/FFF 3D printing |
| Product Series | SSSray PLA Matte Series – Soft Pastels for Home Décor & Scale Models |
| Manufacturer | SSSray |
| Color | Blossom Pink – light-to-medium pastel pink with a slightly warm candy-pink tone |
| Color Effect | Solid, opaque, single color; no silk, metallic, fluorescent or gradient effect |
| Surface Finish | Soft matte / non-reflective |
| Nominal Filament Diameter | 1.75mm |
| Diameter Tolerance | ±0.03mm |
| High-Speed Print Profile | 150–250mm/s recommended |
| 250mm/s Print-Test Report | Available from SSSray for B2B product qualification; contact our team for the SKU-specific report |
| Net Filament Weight | 1kg per spool |
| Gross Weight | 1.3kg per packaged unit |
| Spool Type | Plastic spool |
| Packaging | Vacuum-Sealed Packaging with Desiccant |
| Printing Process | FDM / FFF |
| Printer Compatibility | Most open-material 1.75mm FDM/FFF printers; confirm spool fit and printer-specific material settings |
| Typical Applications | Decorative planters and cachepots, home décor, architectural scale models, educational and presentation models |
| Compliance | RoHS-compliant SKU; SSSray can provide the applicable RoHS compliance report |
| TDS / SDS | The TDS and SDS/MSDS for this SKU are available from SSSray for material evaluation, safe handling and purchasing qualification |
| OEM / ODM | Supported; packaging, labels and private-label options subject to project confirmation |
Recommended Print Settings
| Parameter | Recommended Starting Value | Usable / Adjustment Range |
|---|---|---|
| Nozzle temperature | 220°C for 150–250mm/s profiles | 200–260°C; 200–215°C at 50–150mm/s and 210–230°C at 150–250mm/s. Confirm the final profile with a temperature tower and flow test on the target printer. |
| Heated bed temperature | 55°C | 50–60°C; adjust to the build-plate surface and room conditions. |
| Print speed | 150–250mm/s for high-speed production | 50–250mm/s; the upper end requires a suitable hotend, adequate cooling and calibrated slicer settings. The 250mm/s test point is documented in SSSray’s SKU-specific print-test report. |
| Volumetric flow calibration | 15–20mm³/s starting point for standard hotends | 20–30mm³/s can be explored on high-flow hotends after a flow test; set the slicer limit to the lower capability of the filament profile and hotend. |
| Retraction – Direct Drive | 0.6–1.0mm at 25–40mm/s | Start near 0.8mm / 30mm/s; calibrate to the extruder and hotend. |
| Retraction – Bowden | 2.5–5.0mm at 35–50mm/s | Start near 3mm / 40mm/s; avoid excessive retraction that can grind or deform the filament. |
| Layer height | 0.16–0.20mm for production balance | 0.12–0.28mm; use 0.12–0.16mm for fine architectural detail and 0.20–0.28mm for faster, larger models. |
| Part cooling fan | 80–100% after the first layers | Start at 0–30% on the first layer, then increase progressively; use strong cooling for bridges and high-speed layers. |
| Wall count | 2–3 walls for décor; 3–4 for planter shells | Set by wall thickness and part design; wall count alone does not make an FDM print watertight. |
| Infill | 15–20% for decorative models | 40–60% for heavier display sections where the design requires additional internal support. |
| First-layer speed | 25–40mm/s | 20–50mm/s; establish reliable first-layer adhesion before enabling the high-speed profile. |
| Bed adhesion | Clean PEI (smooth, satin or textured) | Glass can be used with a suitable adhesive where required; follow the build-plate manufacturer’s instructions and clean oils/residue before printing. |
Speed figures are slicer targets, not a promise that every move will reach the set speed. Actual throughput depends on hotend flow, nozzle diameter, line width, layer height, acceleration, cooling and model geometry. Confirm the profile with a flow test on the target printer before batch production.
Print Optimization Guide
| Optimization Point | Practical Guidance |
|---|---|
| Color and surface presentation | Use 0.16–0.20mm layers for the 150–250mm/s production profile; reduce outer-wall speed where planter ribs or architectural faces need a finer finish. |
| Fluted and faceted planters | Use 3–4 perimeters for shell definition; choose a layer height that preserves the vertical ribs and facet transitions. |
| Architectural model details | Use 0.12–0.16mm layers for window frames, stair edges and small façade details; verify support contact on test parts. |
| Matte finish consistency | Raise nozzle temperature progressively as print speed increases; use a temperature tower and flow test to balance melt capacity, layer bonding and the matte surface. |
| First-layer adhesion | Clean the PEI or glass surface, verify Z-offset and complete the first layer at 25–40mm/s before switching to the high-speed production profile. |
| Stringing and travel marks | Tune retraction for Direct Drive or Bowden hardware separately; check filament dryness, nozzle condition and hotend flow before increasing speed. |
| Planter use conditions | Use an inner liner or validated surface seal if the printed planter will hold water or wet soil; FDM prints are not inherently watertight. |
| Batch color approval | Approve a physical Blossom Pink reference sample under the buyer’s retail or project lighting before a repeat production order. |
Printer Brand Starting Settings
| Printer Ecosystem | Nozzle Starting Point | Bed Starting Point | Print Speed Starting Point | Setup Notes |
|---|---|---|---|---|
| Bambu Lab (A1 / P1 / X1 families) | 210–230°C | 50–60°C | 150–250mm/s | Use a high-speed PLA profile on capable models; tune flow and cooling for the 150–250mm/s range. Check spool fit and AMS compatibility separately. |
| Prusa (MK4S / CORE One families) | 215–235°C | 50–60°C | 100–250mm/s | Use the Input Shaper Speed profile where supported; set the material flow limit to the calibrated hotend capability and tune the first layer. |
| Creality (K1 / K1C / K1 Max high-speed models) | 210–235°C | 50–60°C | 150–250mm/s | Use a high-speed PLA profile on K-series machines; verify hotend flow, cooling and extruder type before setting retraction. |
| Flashforge Adventurer 5M / 5M Pro | 210–235°C | 50–60°C | 150–250mm/s | Begin with a high-speed PLA profile; reduce outer-wall speed on visible architectural details and confirm the hotend flow limit. |
| Anycubic Kobra 3 / comparable high-speed models | 210–235°C | 50–60°C | 150–250mm/s | Select a high-speed PLA profile where the printer supports it; start at 150–250mm/s and calibrate temperature, flow and retraction on the target machine. |
These are starting references for a 0.4mm nozzle on high-speed-capable models, not universal machine presets. Set the slicer maximum volumetric flow to the lower of the filament profile and hotend capability; validate with a flow and layer-bonding test before production.
Performance Characteristics
| Characteristic | Product Information / Material Behavior | Production or Application Reference |
|---|---|---|
| High-speed print profile | Recommended production range: 150–250mm/s. SSSray has a SKU-specific print-test report documenting a 250mm/s test. | The 250mm/s result is documented for this SKU; actual throughput on the buyer’s printer still depends on hotend flow, nozzle, layer geometry, acceleration and cooling. Calibrate the target printer before batch runs. |
| Diameter control | 1.75mm nominal diameter with stated ±0.03mm tolerance. | Use the stated tolerance for incoming filament inspection; final part dimensions also depend on machine calibration and slicer compensation. |
| Color presentation | Blossom Pink; solid, opaque, warm pastel pink with a soft matte finish. | Approve a physical color reference under the buyer’s intended lighting for repeat orders and private-label color matching. |
| Surface finish | Low-reflection matte surface. | Diffuses direct highlights on fluted, faceted and curved decorative surfaces; layer lines remain dependent on layer height and print profile. |
| Material behavior | PLA-based material with familiar FDM processing and a low tendency to warp compared with ABS. | Suitable for indoor decorative and presentation parts; consider heat exposure and application loads when selecting the material. |
| Part design | Designed for decorative, educational and architectural presentation models. | For parts subject to sustained load, impact or elevated temperature, select a material grade matched to the engineering requirement. |
| Planter use | Suitable for decorative planter shells and cachepots. | FDM prints are not inherently watertight; use an inner liner or a separately validated seal when holding water or wet soil. |
Application Scenarios
| Application Focus | Practical Notes |
|---|---|
| Decorative planters & cachepots | Print faceted planter shells, fluted panels and pastel home décor efficiently on high-speed FDM systems. Use an inner liner if the vessel will hold water or wet soil. |
| Architectural scale-building models | The warm matte pink keeps window frames, stair steps, curved walls and façade details legible under display lighting, while high-speed profiles support repeat model production. |
| Villa and property presentation models | Use Blossom Pink for selected façade elements, landscape features or full concept models where a soft color palette is required. |
| Home décor accessories | Suitable for desk organisers, shelf ornaments, decorative trays and display pieces intended for indoor use. |
| Education and model-making | Useful for classroom architecture models, design exercises and demonstrations of form, proportion and surface geometry. |
| Retail and product presentation | A differentiated high-speed pastel SKU for creative retail ranges, branded displays and e-commerce product bundles. |
Storage Guide
- Keep unopened spools in the original vacuum-sealed bag with the included desiccant until use.
- After opening, return unused filament to a sealed bag or dry storage container with fresh desiccant.
- Store in a cool, dry indoor location away from direct sunlight, condensation and heat sources.
- Keep the filament path secured on the spool after printing to prevent loose winding and tangles.
- If popping, excessive stringing or inconsistent extrusion suggests moisture exposure, dry with a filament dryer using a PLA-compatible setting and confirm the plastic spool’s heat limit first.
OEM / ODM Services
As a filament manufacturer, we work with distributors, importers, wholesalers, retailers and private-label brands on OEM/ODM programs. For Blossom Pink High-Speed Matte PLA, we can coordinate neutral packaging, custom labels, retail box artwork, barcode and language layouts, master-carton marks, selected spool-design options and coordinated pastel color assortments.
Standard configuration is 1.75mm diameter and 1kg net weight. Selected 2.85mm, 3kg or 5kg configurations can be discussed only where the production platform and material specification support them. Custom color development and packaging require an approved reference, final artwork and confirmed MOQ before production scheduling.
- Neutral packaging MOQ: 50 spools.
- OEM-branded packaging MOQ: typically 500–1,000 spools.
- Standard lead time: 7–15 days after order details are confirmed.
- Customized lead time: 15–25 days after color, artwork and packaging are approved.
Quality Control
- We review incoming resin and colorant documentation against the approved production specification.
- We monitor filament diameter during production against the 1.75mm / ±0.03mm requirement.
- We compare each production color reference with the approved Blossom Pink sample under controlled lighting.
- We inspect spool winding and the feed path for loose loops, crossed winding and visible contamination.
- We review sample prints for extrusion continuity, surface appearance and first-layer behavior using the agreed printer profile.
- We verify net weight, vacuum seal, desiccant, labels and export-carton packing before shipment release.
Compliance & Technical Documents
RoHS Compliance: SSSray supplies this Blossom Pink Matte PLA as a RoHS-compliant SKU and can provide the corresponding RoHS compliance report for buyer qualification and purchasing records.
TDS & SDS/MSDS: SSSray can provide the applicable Technical Data Sheet (TDS) and Safety Data Sheet (SDS/MSDS) for this SKU to support material evaluation, safe handling and purchasing review.
OEM Documentation: For private-label orders, our team coordinates the approved product label, carton marks and agreed documentation package for the destination market.
Frequently Asked Questions
What is the MOQ for SSSray Blossom Pink Matte PLA?
Neutral packaging starts at 50 spools. OEM-branded packaging typically starts at 500–1,000 spools, depending on the final label, box and carton requirements.
Which printers can use this 1.75mm filament?
It is intended for most open-material 1.75mm FDM/FFF printers, including common Bambu Lab, Prusa, Creality, Flashforge, Anycubic and Elegoo systems. Confirm spool dimensions, material-path clearance and printer-specific settings before a production run.
What does Blossom Pink look like?
It is a light-to-medium pastel pink with a slightly warm candy-pink tone. The color is solid and opaque, with a soft matte surface rather than a silk, metallic, fluorescent or gradient effect.
What print speed can I use with Blossom Pink High-Speed Matte PLA?
For a 0.4mm nozzle, start at 220°C nozzle temperature, 55°C bed temperature and 150–250mm/s. SSSray has a SKU-specific print-test report documenting a 250mm/s test. Actual speed on your printer depends on hotend flow, nozzle, layer height, line width, cooling and model geometry.
Can this filament be used to print planters?
It is suitable for decorative planter shells and cachepots. FDM prints are not inherently watertight, so use an inner liner or a separately validated seal if the planter will hold water or wet soil.
Can SSSray provide private-label packaging?
Yes. Options include custom labels, retail box artwork, barcode and language layouts, carton marks and selected spool-design options. Final options are confirmed against the order quantity and approved artwork.
Are samples available before a bulk order?
Yes. Qualified B2B buyers can apply for up to 3 free sample spools through our sample program. Our sales team will review the application and confirm sample availability, freight responsibility and delivery arrangements before dispatch.
What are the lead time and trade terms?
For this SKU, standard orders are scheduled for 7–15 days after order details are confirmed. OEM/custom orders are scheduled for 15–25 days after color, artwork and packaging are approved. Trade terms are FOB Ningbo Port, China, or EXW at the SSSray factory in Jinhua, Zhejiang, China, under Incoterms® 2020.
Get Bulk Pricing for Blossom Pink Matte PLA
Add SSSray Blossom Pink Matte PLA to your filament range. Send us your target quantity, destination market, printer platform and packaging requirements. We will confirm the specification, provide the available 250mm/s print-test and compliance documents, arrange sample qualification and prepare a wholesale or OEM quotation.



