Home » 3D Printer Filament Product Catalog » Deep Black PLA Matte
SSSray PLA Matte Series | Deep Black | Wholesale Supply | OEM / ODM

SSSray Deep Black PLA Matte 3D Printer Filament, 1.75mm – PLA filament mat zwart for Device Enclosures & Sculptural Prints

Factory-direct Deep Black PLA Matte for enclosure makers, product designers, distributors and private-label filament brands.

We produce a solid, opaque near-black with a soft matte surface and a faint charcoal cast under direct light. The low-glare finish suits control panels, equipment covers, rotary-knob housings and sculptural parts. Each standard spool carries 1kg net filament, with 1.75mm diameter and ±0.03mm tolerance for wholesale and OEM / ODM supply.

RoHS Compliant
7–15 Days Standard Lead Time
FOB Ningbo / EXW
B2B Sample Support
RoHS Compliant ±0.03mm Diameter Tolerance Vacuum + Desiccant OEM / ODM Support
MaterialPLA Matte
SeriesSSSray PLA Matte
Color EffectDeep Black, Soft Matte
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Nozzle Temp200–230°C
Bed Temp50–60°C
Print Speed50–150 mm/s
PackagingVacuum + Desiccant
Spool TypePlastic Spool

MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.

Lead Time: Standard orders 7–15 days; customized orders 15–25 days.

Product Overview

At SSSray, we manufacture Deep Black PLA Matte for printed parts where a controlled black appearance is part of the product specification. The filament produces a solid, opaque near-black with a faint charcoal cast in direct light. Its soft matte surface keeps reflections subdued across broad panels, curved covers and sculptural forms, without a silk sheen, metallic effect or carbon-fibre texture. This makes the grade a strong fit for device enclosures, control boxes, front covers, rotary-knob housings, display components and decorative models.

We supply this material in standard 1.75mm diameter with ±0.03mm tolerance, on a 1kg plastic spool, vacuum-sealed with desiccant. PLA Matte material properties include density of 1.24 ± 0.01 g/cm³, XY tensile strength of 50 ± 2 MPa and elongation at break of 5–9%. Our Jinhua manufacturing operation supports factory-direct wholesale from 50 rolls, with OEM packaging programs typically starting at 500–1,000 rolls. We coordinate sample evaluation, print-profile review, private-label artwork and export packing before bulk dispatch.

Why This Deep Black Matte Finish Stands Out

Black is unforgiving on large visible faces: gloss variation and strong reflections can make separate covers look mismatched. We produce this grade with an opaque near-black tone and a soft matte finish that keeps visual reflections low across flat panels and curved parts. A faint charcoal cast appears under direct light, while the overall appearance remains a deep, uniform black. Unlike silk black or metallic filament, this finish avoids reflective highlights that interrupt a broad front panel. It gives designers a practical PLA option for instrument bezels, equipment housings, control interfaces and dark sculptural pieces.

Key Selling Points

Deep Opaque Black

A solid near-black tone with a faint charcoal cast in direct light, suited to dark product housings and display parts.

Low-Glare Matte Surface

A non-glossy finish without silk, metallic or carbon-fibre visual effects, keeping reflections visually restrained.

Clean Panel Presentation

Softens the visual prominence of layer lines on flat covers, sweeping curves and enclosure surfaces.

Controlled Diameter

We control this grade to a 1.75mm nominal diameter with ±0.03mm tolerance, supporting steady feeding on a correctly calibrated printer.

Practical PLA Workflow

Runs on a familiar PLA workflow across most open-material 1.75mm FDM / FFF printers.

Wholesale & Private Label

We supply neutral packaging from 50 rolls, with OEM packaging programs typically from 500–1,000 rolls.

Key Features & Buyer Benefits

FeaturePractical Buyer Benefit
1.75mm Standard DiameterFits the standard filament format used by most open-material FDM / FFF printer platforms.
±0.03mm Diameter ToleranceSets a clear incoming-material specification for feeding consistency and repeat-order checks.
Density: 1.24 ± 0.01 g/cm³Provides a material reference for part-weight estimation and purchasing comparisons.
XY Tensile Strength: 50 ± 2 MPaGives product teams a defined material-level reference for early design and material screening.
Elongation at Break: 5–9%Adds a useful comparison point when reviewing the material behaviour of printed parts.
1kg Plastic SpoolMatches a familiar retail and workshop unit size for stock planning and replenishment.
Vacuum-Sealed Bag + DesiccantHelps protect the filament from moisture exposure during storage and international transport.
Factory-Direct OEM / ODMWe coordinate neutral packaging, custom labels, branded cartons, barcodes and private-label programs.

Commercial Value & Cost Efficiency

Deep black is a core colour across electronics accessories, workshop equipment, consumer-product housings and design-led display ranges. SSSray Deep Black PLA Matte gives distributors a clear SKU between glossy standard PLA and higher-cost specialty polymers: a defined low-glare surface with a familiar PLA printing workflow. The 1kg spool keeps retail and workshop stock planning straightforward. Buyers can start with neutral packaging from 50 rolls, test the finish in their own sales channel, then move to branded labels and cartons when the product and artwork are approved.

For enclosure and control-panel programs, our team can review wall count, fit requirements, expected service temperature and print conditions before quotation. This helps buyers match the material to the actual part function and avoid specifying an engineering polymer when a visual-purpose PLA grade meets the requirement.

How We Work: B2B Cooperation Process

1
Application & Finish Brief
2
Material & Specification Review
3
Deep-Black Sample Evaluation
4
Label, Spool & Carton Approval
5
Bulk Extrusion & Batch QC
6
Export Packing & Dispatch

Material Comparison Guide

MaterialSurface AppearanceTypical Material BehaviourPrinting ConditionsTypical Applications
PLA Matte (This Product)Deep opaque black; low-glare matte finishRigid PLA-based part; not intended for sustained high-temperature serviceNozzle 200–230°C; bed 50–60°C; profile tuned to printer and build surfaceDevice enclosures, covers, control panels, decorative and sculptural prints
Standard PLAOften satin to glossy, depending on formulation and colourEasy-to-print general-purpose PLA; limited heat and UV resistanceTypical PLA nozzle and bed settings; profile varies by brandPrototypes, models, fixtures and everyday display parts
PLA+ / PLA ProUsually conventional PLA appearance; finish depends on formulationModified PLA blends are formulated for higher toughness or impact resistance; properties vary by supplierPLA-like settings, with product-specific tuning requiredGeneral-purpose parts where a modified PLA formulation is preferred
PETGCommonly clear, translucent or glossy; matte variants also existTypically more ductile and heat-tolerant than standard PLA; stringing control is importantHigher nozzle and bed temperatures than PLA in most product profilesFunctional brackets, containers, guards and utility parts
ABS / ASAAvailable in matte and other finishesHigher-temperature engineering thermoplastics; shrinkage and warping need controlHigher nozzle / bed temperatures; enclosure commonly recommendedHeat-exposed parts; ASA is commonly selected for outdoor UV exposure

When a project has defined service-temperature, mechanical-load or regulatory requirements, share the application with our team so we can help select the right SSSray material grade.

Technical Specifications

Product NameSSSray Deep Black PLA Matte 3D Printer Filament, 1.75mm – PLA filament mat zwart for Device Enclosures & Sculptural Prints
MaterialPLA Matte (polylactic acid with a matte surface finish)
Product SeriesSSSray PLA Matte Series – Glare-Free Surfaces for Enclosures & Sculptural Pieces
ColourDeep Black, Soft Matte; solid opaque near-black with a faint charcoal tone in direct light
Surface EffectFlat, low-glare matte; no gloss, silk, metallic or carbon-fibre texture
Filament Diameter1.75mm standard
Diameter Tolerance±0.03mm
Roundness Deviation≤0.02mm
Density1.24 ± 0.01 g/cm³
Tensile Strength (XY)50 ± 2 MPa
Elongation at Break (XY)5–9%
Net Filament Weight1kg per spool
Gross Weight1.3kg per packaged unit
Spool TypePlastic spool
PackagingVacuum-sealed bag with desiccant
Printer CompatibilityMost 1.75mm open-material FDM / FFF printers, including Bambu Lab, Prusa, Creality, Anycubic, Elegoo and Flashforge platforms; confirm the individual printer’s material and spool-clearance requirements
Typical ApplicationsDevice enclosures, control boxes, front panels, covers, rotary-knob housings, sculptural prints and decorative models
RoHS StatusRoHS compliant; supporting documentation available on request
OEM / ODMSupported; neutral and private-label packaging options available subject to order confirmation

Recommended Print Settings

ParameterRecommended ValueUsable / Adjustment Range
Nozzle Temperature215°C starting point200–230°C; tune with a temperature tower and outer-wall finish check
Bed Temperature55°C starting point50–60°C; for an unheated bed, follow the build-surface manufacturer’s PLA guidance and verify first-layer adhesion with a test print
Print Speed50–150 mm/sUse as the starting range; tune against volumetric flow, nozzle temperature and cooling. Validate higher speeds on the target printer before repeat production.
Outer Wall Speed35–60 mm/sKeep large visible panels and smooth curved surfaces toward the lower end for a more even finish
Retraction – Bowden4–6mm at 25–40mm/sTune in small increments according to stringing and extruder path
Retraction – Direct Drive0.5–1.0mm at 20–40mm/sStart near 0.6mm; increase only as needed to control stringing
Layer Height0.16–0.24mm0.12–0.28mm with a 0.4mm nozzle
Part Cooling Fan80–100% after the first 2 layers0–30% on the first layer; increase from layers 2–3 according to overhangs and layer bonding
Wall Count3 perimeters2–4 perimeters; use 3–4 for enclosure walls and screw-boss regions where the design allows
Infill15–20% for decorative models30–40% for general parts; 40–60% for rigid, non-safety-critical parts where the design requires it
First-Layer Speed20–30 mm/sReduce for small contact areas or difficult plate surfaces
Bed AdhesionClean smooth or textured PEIGlass with an appropriate adhesive or release layer when required
Nozzle Reference0.4mm standard nozzleOther nozzle sizes require layer-height, temperature and flow recalibration

For Deep Black panels and enclosure faces, keep outer-wall speed controlled even when infill runs faster. Validate any higher-speed profile on the target printer and a representative part, checking extrusion consistency, cooling and surface finish before repeat production.

Print Optimization Guide

Optimization ItemPractical Guidance
Consistent Deep-Black SurfaceKeep nozzle temperature and flow ratio stable; avoid changing speed repeatedly within large visible outer walls.
Low-Glare FinishUse a 0.16–0.20mm layer height and moderate outer-wall speed to keep the matte surface visually even.
Enclosure FitCheck hole diameter, screw-boss design and mating clearances with a first-article print before bulk production.
First-Layer ReliabilityClean the build plate, verify Z-offset and use a 20–30mm/s first layer; add a brim for narrow footprints.
Stringing ControlRun a retraction test and lower nozzle temperature in small steps if fine hairs appear; check filament condition.
Dimensional RepeatabilityCalibrate flow and dimensional compensation on the target printer before producing fit-critical components.
Moisture ManagementReseal opened spools with desiccant; dry only when print symptoms indicate moisture and follow the dryer maker’s PLA guidance.
Functional Part DesignUse adequate perimeters and suitable infill, but qualify heat exposure and mechanical loads before end-use deployment.

Printer Brand Starting Settings

Printer EcosystemNozzle TemperatureBed TemperatureInitial Print SpeedSetup Notes
Bambu Lab200–230°CCool Plate: 35–55°C
High Temperature / Textured PEI: 55–65°C
50–150 mm/sSelect the installed build plate in Bambu Studio and use its matching PLA profile. Verify first-layer adhesion and surface finish with this SSSray grade.
Prusa200–230°C50–60°C40–120 mm/sUse a PLA profile as the baseline; check first-layer Z and the outer-wall finish.
Creality200–230°C50–60°C40–150 mm/sSet retraction for Bowden or direct-drive hardware and verify adhesion on large flat panels.
Flashforge200–230°C50–60°C40–150 mm/sStart with a PLA material profile; check spool path, flow and build-plate adhesion.
Anycubic / Elegoo200–230°C50–60°C40–150 mm/sTune temperature and retraction with a small calibration print before a production run.

These are SSSray starting values for common printer families. Bambu Lab bed-temperature ranges vary by build-plate type; the values above follow its published PLA guide as starting references. Calibrate temperature, flow and speed on the exact printer, nozzle, slicer and build plate before repeat production.

Performance Characteristics

CharacteristicProduct Specification / Material BehaviourSSSray Production / Application Reference
Colour AppearanceSolid, opaque near-black with a faint charcoal cast in direct lightWe compare production colour against the approved Deep Black reference under consistent lighting.
Surface FinishSoft matte, low-glare appearance; no silk sheen or metallic effectOur print checks review surface consistency across flat faces and curved test geometry.
OpacityOpaque solid colourWall thickness and print structure determine light transmission at thin sections.
Diameter1.75mm nominal; ±0.03mm toleranceWe use online laser diameter measurement and provide batch records for wholesale and OEM orders.
Roundness Deviation≤0.02mmProvides an additional dimensional reference for material feeding and incoming inspection.
Density1.24 ± 0.01 g/cm³Use this material value for preliminary part-mass and material-consumption estimates.
Tensile Strength (XY)50 ± 2 MPaMaterial-level reference for design screening; printed-part strength depends on orientation and process settings.
Elongation at Break (XY)5–9%Use with tensile data when comparing material behaviour; part geometry and layer bonding affect finished-part performance.
Warping TendencyPLA generally has lower warping tendency than ABS / ASA under suitable print conditionsUse a clean, stable build surface and a brim for large flat parts or narrow contact footprints.
Layer-Line AppearanceThe matte surface softens layer-line contrast; it does not remove layer geometryUse 0.16–0.20mm layers and controlled outer-wall speed on visible faces.
Thermal / Outdoor UseGeneral-purpose PLA; not specified for sustained high-temperature or long-term outdoor serviceFor heat, UV or load-bearing requirements, ask our team to review the application and alternative grades.

Applications

Application FocusPractical Notes
Device Enclosures & Control BoxesWe recommend Deep Black for appearance prototypes, covers and housings; check screw-boss geometry, fit clearances and operating temperature on the first article.
Control Panels & Front CoversThe low-glare black surface suits instrument bezels, front panels and non-transparent interface surrounds.
Rotary Knobs & Accessory HousingsUse this grade for appearance models and non-load-bearing accessories; validate fit, wear and handling loads before release.
Sculptural & Organic PrintsMatte black defines curved silhouettes, organic contours and shadow detail without glossy highlights.
Display Models & Retail PropsSuitable for monochrome display pieces, product mock-ups, stands and branded presentation components.
Design Verification PrototypesPrint first articles to verify appearance, assembly layout and basic fit before committing to production tooling.
Education & Creative WorkshopsA familiar PLA workflow for teaching models, creative projects and general non-load-bearing prints.

Storage Guide

  • We vacuum-seal each spool with desiccant. Keep the bag sealed until the filament is ready to print.
  • After opening, return the spool to a sealed bag or dry storage box with fresh desiccant.
  • Store the spool in a cool, dry area away from direct sunlight, heaters and high-temperature equipment.
  • For humid warehouses, we recommend a sealed filament cabinet and regular storage-humidity checks.
  • If popping, bubbling or unusual stringing appears, dry the spool in a controlled PLA-compatible filament dryer and follow the dryer’s PLA instructions before printing.

OEM / ODM Services

SSSray manufactures Deep Black PLA Matte for distributors, importers, equipment brands and private-label filament businesses. At our Jinhua factory, 50+ extrusion lines, capacity of up to 35 tons per day and monthly capacity above 1,000 tons support repeat wholesale programs and planned OEM runs. For this SKU, we coordinate neutral packaging, custom labels, branded cartons, barcodes, market-language artwork and spool presentation. The standard offer is a 1kg spool in 1.75mm diameter; 3kg, 5kg, 2.85mm or custom spool configurations are reviewed against the material and production plan before quotation.

MOQ: Neutral packaging starts from 50 rolls. OEM packaging typically starts from 500–1,000 rolls, depending on artwork, packaging components and order configuration. We can arrange sample review and packaging approval before bulk production.

Quality Control

  • Diameter control: Online laser measurement checks the filament against the 1.75mm ±0.03mm specification.
  • Colour verification: Our QC team uses colourimeter / spectrophotometer checks and compares Deep Black output with the approved colour reference.
  • Material checks: Moisture analysis and applicable melt-flow and tensile tests support material evaluation and batch control.
  • Spool inspection: We check winding rows, filament-end security, spool weight and smooth unwinding before packing.
  • Packaging integrity: Each unit is checked for vacuum-bag seal condition and desiccant inclusion.
  • Print and shipment checks: We run representative print trials, maintain batch records and check final cartons and labels before dispatch. A batch COA accompanies wholesale and OEM shipments.

Compliance & Technical Documentation

  • RoHS: SSSray Deep Black PLA Matte is RoHS compliant. We can provide the product’s supporting RoHS documentation for your purchasing and compliance review.
  • TDS: Our PLA Matte TDS applies to this Deep Black grade and provides material-property and processing references for technical evaluation. The current document is available through our Technical Document Center.
  • SDS / MSDS: We provide the applicable PLA Matte safety data sheet for material handling and shipment documentation.

Tell our team your destination market and document requirements when requesting a quotation so we can prepare the correct order documentation.

Frequently Asked Questions

What is the MOQ for SSSray Deep Black PLA Matte?

Our neutral-packaging MOQ starts at 50 rolls. OEM packaging typically starts at 500–1,000 rolls, depending on label, carton and customization scope.

What makes Deep Black PLA Matte different from glossy black PLA?

We formulate this SKU for a solid, opaque near-black appearance with a soft matte, low-glare surface. It has no silk sheen, metallic effect or carbon-fibre texture, making it a clear choice for understated enclosures, control panels and sculptural finishes.

Which 3D printers can use this 1.75mm filament?

It is suitable for most open-material 1.75mm FDM / FFF printers, including Bambu Lab, Prusa, Creality, Anycubic, Elegoo and Flashforge platforms. Match the spool clearance, hotend capability and slicer profile to your printer before production runs.

What print settings do you recommend?

Start at 215°C nozzle temperature, 55°C bed temperature (adjust to the installed build-plate profile) and 50–150mm/s print speed. Use 35–60mm/s for visible outer walls. Validate higher speeds on the target printer and a representative part, checking extrusion consistency, cooling and surface finish before repeat production.

Is this PLA Matte suitable for device enclosures and control panels?

We recommend it for appearance-focused housings, covers, control-panel surrounds and fit-check prototypes. For sustained heat, outdoor UV exposure, flame requirements or load-bearing service, share the operating conditions with our team so we can review a suitable material grade.

Can SSSray provide samples and private-label packaging?

Yes. Qualified B2B buyers can receive up to 3 free sample rolls after project approval. We support custom labels, branded cartons, barcodes, market-language artwork and selected spool or product-line configurations.

Which technical and compliance documents can SSSray provide?

We provide the PLA Matte TDS, applicable SDS / MSDS and RoHS supporting documentation for this grade. COA and batch records are available for qualified wholesale and OEM shipments.

What are the lead time, factory location and shipping terms?

Our factory is in Jinhua, Zhejiang, China. Standard orders typically ship within 7–15 days and customized orders within 15–25 days. We offer FOB Ningbo or EXW terms; the final schedule is confirmed with the approved order specification and packaging plan.

Start Your Deep Black PLA Matte Wholesale Program with SSSray

Send our factory team your target quantity, destination market, printer requirements and packaging brief. We will prepare bulk pricing, sample arrangements and an OEM / ODM production plan for your review.