Home » 3D Printer Filament Product Catalog » Fuchsia Pink PLA Basic Filament
PLA Basic Series | Fuchsia Pink | Wholesale & OEM / ODM

Fuchsia Pink PLA Basic 3D Printer Filament 1.75mm by SSSray – Filament PLA Rose Fuchsia for Home Décor & Fine-Texture Models

Bright fuchsia PLA Basic with a light satin finish for home décor, fine-texture models, retail color programs, and private-label supply.

We supply this saturated pink-magenta PLA for buyers who want an easy-to-position everyday SKU with clean extrusion, low warping under recommended settings, consistent 1.75mm feeding, and a color that reads clearly on décor pieces, display models, organizers, vases, and detailed consumer prints.

Export-Ready Quality
7-15 Days Lead Time
FOB Ningbo / EXW
Up to 3 B2B Sample Spools
RoHS Compliant ±0.03mm Tolerance Vacuum Sealed + Desiccant OEM / ODM Support
MaterialPLA Basic
SeriesSSSray PLA Basic Series
Color EffectFuchsia Pink / Light Satin
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross WeightApprox. 1.3kg (standard 1kg spool)
Nozzle Temp200–220°C
Bed Temp45–60°C
Print Speed50–120 mm/s
PackagingVacuum + Desiccant
Spool TypePlastic Spool

MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.

Lead Time: Standard 7–15 days; customized orders typically 15–25 days.

Product Overview

Fuchsia Pink PLA Basic 3D Printer Filament 1.75mm is built for B2B color programs that need dependable everyday printability and a strong visual identity. The shade is a bright, saturated pink-magenta with a cool undertone, solid opacity, and a light satin sheen that keeps fine surface texture visible instead of washing it out with excessive gloss. It is especially effective on home décor, spiral vases, moon-surface models, organizers, display pieces, classroom models, gifts, and other prints where color and surface detail drive the buying decision.

For distributors, wholesalers, importers, retailers, and private-label buyers, we combine ±0.03mm diameter tolerance, vacuum-sealed packaging with desiccant, a standard 1kg plastic spool, and flexible OEM / ODM support. The material is designed for smooth extrusion, practical first-layer adhesion, low warping under recommended settings, and broad use across open-material 1.75mm FDM printer fleets. Neutral packaging starts from 50 rolls, while OEM packaging programs typically start from 500–1,000 rolls.

Why This Product Stands Out

We developed this Fuchsia Pink SKU for buyers who want a stronger color story without changing the familiar PLA workflow. Its opaque cool-magenta tone stands out on shelf and in e-commerce photography, while the light satin finish keeps texture visible on vases, moon-surface décor, faceted models, and other detail-led prints. It gives distributors and private-label brands one practical color for gift, home décor, education, hobby, and general consumer-print programs.

Key Selling Points

Stable ±0.03mm Diameter

Controlled filament diameter supports consistent feeding and repeatable extrusion across routine production runs.

Smooth Everyday Extrusion

A practical PLA processing window supports clean layer placement on common 0.4mm-nozzle FDM workflows.

High-Visibility Fuchsia Finish

Bright opaque pink-magenta with a cool undertone and light satin sheen for décor and display-focused SKUs.

Retail-Ready 1kg Format

Standard 1kg net-weight plastic spool format fits mainstream wholesale, retail, and e-commerce programs.

Export-Oriented Supply

FOB Ningbo and EXW options with standard 7–15 day lead time for regular orders.

OEM / ODM & Private Label

Custom labels, branded boxes, color programs, and spool options can be aligned to qualified buyer projects.

Key Features

Feature Practical Buyer Benefit
Fuchsia Pink, Light Satin SheenCreates a vivid color point for décor, gifts, creative models, and retail display lines
1.75mm / ±0.03mmSupports stable feeding across mainstream open-material 1.75mm FDM printer fleets
Low-Warp PLA ProcessingReduces setup friction for everyday decorative and general-purpose printing
1kg Plastic SpoolMatches a familiar format for distributors, retailers, and e-commerce channels
Vacuum Sealed with DesiccantHelps protect the filament during storage and international transport
MOQ from 50 RollsSupports lower-risk market testing before scaling into OEM/private-label volumes

Commercial Value for B2B Buyers

Fuchsia Pink adds a high-visibility color to a PLA range without changing the familiar printing workflow your customers already use. The saturated pink-magenta and light satin finish work especially well for décor, gifts, education, organizers, and detailed consumer models, giving distributors and private-label brands a clear step beyond core black, white, and gray. We supply the SKU in a standard 1kg format, with neutral packaging from 50 rolls for market entry and OEM packaging typically from 500–1,000 rolls for branded programs.

How We Qualify Fuchsia Pink Orders

1
Color & Application Brief
2
Fuchsia Sample Review
3
Surface & Detail Print Check
4
Packaging Confirmation
5
Batch Color & Winding Control
6
Final QC & Shipment

Material Comparison Guide

Material Typical Nozzle Range Typical Bed Condition Warping / Setup Behavior Typical Use
PLA Basic190–230°C45–60°C recommendedLow warping; open printing is commonDécor, detailed models, education, general consumer prints
PLA+ / PLA Pro200–230°C50–65°CLow warping; formulation dependentGeneral-purpose parts needing more toughness than standard PLA
PETG230–260°C70–90°CLow-to-moderate warping; adhesion can be strongFunctional parts, brackets, containers, practical prototypes
ABS / ASA240–280°C90–110°CHigher warp sensitivity; enclosure is commonly recommendedFunctional, heat-exposed, and outdoor-oriented parts

Technical Specifications

Product NameFuchsia Pink PLA Basic 3D Printer Filament 1.75mm by SSSray – Filament PLA Rose Fuchsia for Home Décor & Fine-Texture Models
MaterialPLA Basic (Polylactic Acid)
SeriesSSSray PLA Basic Series
Color / EffectFuchsia Pink; bright saturated pink-magenta with a cool undertone, solid opacity, and light satin sheen
Filament Diameter1.75mm standard; 2.85mm available on request
Tolerance±0.03mm
Net Weight1kg standard; 3kg and 5kg options available on request
Gross WeightApprox. 1.3kg for standard 1kg spool
Spool TypePlastic spool
PackagingVacuum sealed with desiccant
Printer CompatibilityMost open-material FDM/FFF printers configured for 1.75mm filament, including common Bambu Lab, Prusa, Creality, Flashforge, Anycubic, and Elegoo platforms
Typical ApplicationsHome décor, spiral vases, fine-texture display models, organizers, gifts, education models, and general consumer prints
OEM / ODMSupported for labels, branded boxes, private-label programs, selected spool options, and custom color projects
ComplianceRoHS-compliant

Recommended Print Settings

Parameter Recommended Guidance
Recommended Nozzle Temperature200–220°C
Usable Nozzle Range190–230°C
Recommended Bed Temperature45–60°C
Optional Bed ConditionUnheated printing can work on selected surfaces with suitable adhesion and first-layer tuning
Recommended Print Speed50–120 mm/s
Usable Speed Range40–250 mm/s; for 120–250 mm/s, tune nozzle temperature to hotend flow capacity and confirm surface finish on the target model
Layer Height0.12–0.28mm; 0.12–0.20mm preferred for fine surface detail
Cooling Fan80–100% after the first 2–3 layers
Retraction – Direct Drive0.8–1.5mm starting range
Retraction – Bowden3–6mm starting range
Wall Count2–4 perimeters
Infill15–20% for decorative parts; 40–60% where higher internal support is required
First Layer Speed20–30 mm/s
Bed AdhesionClean smooth/textured PEI or glass; use adhesive where the build surface or printer profile requires it
Drying When Needed50–55°C for about 8 hours when moisture-related stringing, popping, or rough extrusion is observed

Print Optimization Guide

Item Guidance
Fine-Texture ModelsUse 0.12–0.20mm layers and moderate outer-wall speed to preserve crater, lattice, embossed, and faceted detail
Fuchsia Surface ConsistencyKeep outer-wall speed and nozzle temperature consistent across multi-part sets to minimize visible sheen differences
Large Décor PrintsUse 0.20–0.28mm layers and stable cooling to shorten cycle time while retaining clean wall definition
First-Layer ControlStart at 20–30 mm/s on a clean build surface and adjust Z offset before increasing bed temperature
Stringing ControlDry the spool if moisture symptoms appear, then tune retraction and travel rather than lowering temperature excessively
High-Speed PrintingFor 120–250 mm/s, match nozzle temperature to hotend flow capacity and verify outer-wall finish, corners, and small features on the target model

SSSray Starting Settings by Printer Family

Printer Brand Nozzle Bed Speed Starting Guidance
Bambu Lab205–220°C45–55°C80–150 mm/sUse the mid-range for detailed décor; raise temperature progressively when increasing flow
Prusa205–215°C55–60°C50–100 mm/sStart on a clean Smooth or Satin PEI sheet and keep outer-wall speed moderate for satin consistency
Creality200–215°C45–55°C50–120 mm/sSuitable starting range for current direct-drive and Bowden PLA platforms; tune retraction by extruder type
Flashforge205–220°C50–60°C60–150 mm/sUse higher nozzle temperature as flow demand rises and keep cooling strong for detail retention

Start from these values, then tune flow, cooling, retraction, and outer-wall speed to the nozzle size, build plate, slicer profile, and model geometry used in your production setup.

Performance Characteristics

Characteristic Product Reference Practical Notes
Diameter Control±0.03mmSupports stable feeding and repeatable extrusion in standard 1.75mm workflows
Surface AppearanceOpaque fuchsia pink, light satin sheenShows fine geometry clearly without a highly reflective silk-style finish
Warping BehaviorLow under recommended PLA settingsSuitable for open-frame printing on many everyday models when first-layer adhesion is correct
Cooling Requirement80–100% after first layersSupports sharper overhangs, bridges, and small decorative features
Standard Spool Format1kg net / 1.3kg grossFamiliar format for wholesale, retail, warehouse, and e-commerce handling
Packaging ProtectionVacuum sealed + desiccantHelps control exposure during storage and international shipment

Applications

Application Focus Practical Notes
Home DécorWell suited to vases, planters, lamp bases, geometric ornaments, moon-surface décor, and display objects where the fuchsia color is part of the design
Fine-Texture ModelsUse lower layer heights for cratered, faceted, embossed, lattice, and other texture-driven surfaces
Gifts & Consumer PrintsThe saturated pink-magenta creates a strong visual identity for personalized and seasonal product lines
Education & Demonstration ModelsUseful for high-visibility teaching aids, color-coded prototypes, and classroom FDM projects
Retail & Private-Label Color ProgramsA distinctive everyday PLA shade for distributors and brands expanding beyond core black, white, gray, and primary colors

Storage Guide

  • Keep unopened spools in their vacuum-sealed packaging until required for production or sampling
  • After opening, reseal with desiccant in a dry bag or storage box when the spool is not in use
  • Keep filament away from direct sunlight, heat sources, and prolonged exposure to humid workshop air
  • If popping, increased stringing, or rough extrusion appears, dry at 50–55°C for about 8 hours before retesting
  • For multi-spool B2B qualification, use the same storage and conditioning routine so print comparisons remain meaningful

OEM / ODM Services

We support distributors, importers, wholesalers, retailers, and private-label brands with flexible PLA Basic programs. Available project options include neutral packaging, custom labels, branded retail boxes, custom carton marks, selected spool designs, barcode and SKU labeling, and custom color development with specifications confirmed before production.

MOQ Reference: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls. Standard lead time is 7–15 days, while customized programs are typically 15–25 days after specification and artwork confirmation.

Quality Control

  • Diameter is checked against the 1.75mm ±0.03mm specification used for this SKU
  • Winding is inspected for orderly coil placement and clean unwinding from the plastic spool
  • Fuchsia Pink color and light-satin surface appearance are checked against the approved production reference
  • Vacuum seal and desiccant placement are checked before individual units enter export cartons
  • Batch identity, label information, and order consistency are reviewed before release
  • Final carton, marking, and shipment preparation are checked against the confirmed B2B order requirements

For qualification and repeat-order control, review our 3D Printer Filament Test Protocol and Batch QC Data resources.

Compliance & Technical Documentation

  • RoHS-compliant for this Fuchsia Pink PLA Basic SKU
  • TDS and SDS/MSDS are matched to the exact material and SKU revision confirmed for the order
  • For customer-specific documentation, send the required document name and destination market with your inquiry so our team can confirm the applicable file set before order confirmation

Frequently Asked Questions

What is the MOQ for Fuchsia Pink PLA Basic?

Neutral packaging starts from 50 rolls. OEM or private-label packaging typically starts from 500–1,000 rolls depending on the box, label, spool, and color-customization scope.

What makes this fuchsia color different from a standard pink PLA?

This SKU is a bright, saturated pink-magenta with a cool undertone, solid opacity, and a light satin sheen. It is made for décor and fine-texture prints where buyers want a stronger visual color presence than pale or pastel pink.

Is it suitable for most 1.75mm FDM printers?

Yes. It is intended for most open-material FDM/FFF printers configured for 1.75mm filament, including common Bambu Lab, Prusa, Creality, Flashforge, Anycubic, and Elegoo platforms. Final settings still depend on nozzle size, hotend flow, build plate, and slicer profile.

What print settings should I start with?

Start around 200–220°C nozzle temperature, 45–60°C bed temperature, and 50–120 mm/s print speed. For fine-texture décor models, use 0.12–0.20mm layers and keep outer-wall speed moderate.

Can SSSray provide OEM or private-label packaging?

Yes. We support custom labels, branded boxes, private-label programs, selected spool options, and custom color projects for qualified B2B orders.

Are free samples available for B2B qualification?

Qualified B2B buyers can apply for up to 3 complimentary sample spools for material and printer qualification.

What compliance or technical documents are available?

This Fuchsia Pink PLA Basic SKU is RoHS-compliant. TDS and SDS/MSDS are matched to the exact material and SKU revision confirmed for the order; customer-specific document requirements can be checked with our team before order confirmation.

What are the standard lead time and trade terms?

Standard orders are 7–15 days and customized orders are 15–25 days. Standard trade terms are FOB Ningbo or EXW.

Build a Stronger PLA Color Line with Fuchsia Pink

Request bulk pricing, qualify the color on your printer fleet, or discuss private-label packaging for your wholesale and retail program.