Home » 3D Printer Filament Product Catalog » Gold / Silver / Copper Gradient Silk PLA
SSSray PLA Silk Series | Gold / Silver / Copper Gradient | Factory-Direct Wholesale | OEM / ODM Support

SSSray Gold, Silver & Copper Tri-Color Silk PLA 3D Printer Filament for Ornamental Display Models – Trójkolorowy Filament PLA typu Silk

Factory-direct Gold, Silver & Copper Silk PLA for distributors, wholesalers, private-label brands, retailers, and decorative FDM product lines.

At SSSray, we manufacture this tri-color Silk PLA with a repeating Gold → Silver → Copper sequence along the filament length. As the filament feeds through the nozzle, the color sequence appears progressively across the print—especially clearly on taller models, spiral walls, and long decorative surfaces. Each 1.75mm, 1kg spool carries a stated ±0.03mm diameter tolerance and is vacuum-packed with desiccant.

Export-Ready Quality
7-15 Days Lead Time
FOB Ningbo / EXW
Sample Support
Lengthwise Gold → Silver → Copper Sequence 1.75mm / ±0.03mm 1kg Net Spool Vacuum-Sealed with Desiccant Factory-Direct B2B Supply
MaterialPLA Silk
SeriesSSSray PLA Silk
Color EffectGold / Silver / Copper Lengthwise Gradient
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Nozzle Temp210–230°C
Bed Temp45–60°C
Print Speed60–150 mm/s; up to 250 mm/s after high-flow tuning
PackagingVacuum + Desiccant
Spool TypePlastic Spool

MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.

Lead Time: Standard 7–15 working days; customized orders typically 15–25 working days.

Product Overview

SSSray Gold / Silver / Copper Tri-Color Silk PLA Filament 1.75mm 1kg combines three distinct tones in a repeating lengthwise sequence: Gold → Silver → Copper → Gold. The colors are arranged along the filament length and enter the print one after another as the spool feeds. This is a sequential gradient—not a three-color co-extruded strand with all three colors visible across one cross-section.

The warm gold, cool silver, and rich copper tones give this SKU a clear visual identity within a decorative PLA Silk range. Its silk-gloss surface catches light across curved and faceted geometry, while the lengthwise color cycle creates changing bands on spiral vases, fluted columns, mechanical-style décor, gear clocks, figurines, and display pieces. The final color placement depends on model height, extrusion length, wall count, and the spool’s position in the repeating cycle.

We manufacture this filament at our factory in Jinhua, Zhejiang, China. We supply the standard 1.75mm / 1kg configuration with a stated ±0.03mm diameter tolerance, plastic spool, and vacuum-sealed packaging with desiccant. Explore the SSSray PLA Silk filament range for additional finishes and color programs.

Three Colors. One Repeating Lengthwise Sequence.

Gold moves into silver, then copper, and the sequence repeats along the spool. The transition follows filament consumption rather than model viewing angle: taller parts, spiral walls, and longer continuous toolpaths generally provide more room for the color changes to appear. This gives distributors a distinctive three-tone Silk PLA SKU for decorative models where the color progression is part of the finished design.

Key Selling Points

Repeating Gold–Silver–Copper Cycle

Gold, silver, and copper repeat along the filament length, entering the print in sequence as material feeds through the nozzle.

Silk Gloss Across Three Tones

The reflective silk surface brings highlights to curved walls, raised details, fluted profiles, and faceted decorative models.

Designed for Tall & Spiral Geometry

Spiral vases, fluted columns, decorative clock housings, and long sculptural walls give the repeating color sequence room to show.

Flexible Print-Speed Range

Start at 60–150mm/s for routine decorative printing. Suitable high-flow systems can be tuned toward 250mm/s after volumetric-flow, temperature, cooling, and extrusion checks.

1.75mm / ±0.03mm Specification

The standard 1.75mm format and stated ±0.03mm diameter tolerance support controlled feeding with a correctly calibrated FDM profile.

Factory-Direct OEM Supply

We manufacture and pack this Silk PLA for wholesale and private-label programs, with custom labels and packaging options for B2B orders.

Key Features

Product FeatureTechnical / Buyer Value
Gold → Silver → Copper Lengthwise CycleColor transitions appear progressively as the filament is consumed; model height and extrusion length influence the visible sequence.
Silk-Gloss SurfaceReflective highlights make curved surfaces, raised edges, and faceted details more visually pronounced.
1.75mm Diameter / ±0.03mm ToleranceFits the common 1.75mm FDM format and provides a stated dimensional target for feeding and extrusion setup.
1kg Net Spool / 1.3kg Gross WeightProvides a standard retail spool format with a stated packed weight for wholesale handling.
Plastic Spool / Vacuum + DesiccantStandard spool and moisture-conscious packaging support storage and transport before opening.
Inline Diameter MonitoringOur factory uses online laser measurement during extrusion as part of dimensional process control.
OEM / ODM SupportWe support private-label labels, branded packaging, and project-based supply arrangements.

A Three-Tone Silk PLA SKU for Decorative Product Ranges

We developed this Gold / Silver / Copper SKU for distributors, retailers, and private-label brands looking to add a three-tone Silk PLA option alongside single-color and co-extruded products. Its repeating lengthwise sequence is easiest to demonstrate on tall models, spiral paths, and long decorative walls. We supply it in a familiar 1kg spool format from our Jinhua factory, with wholesale and OEM / private-label support.

Before a bulk order, we recommend reviewing the color sequence on a sample print made with the intended model and print settings. Our team can confirm the color sequence, spool, packaging, and order specification with you before production.

How We Work

1
Review Your Market & Application
2
Confirm Color Sequence & Specification
3
Evaluate Sample Prints
4
Approve Labels & Packaging Artwork
5
Schedule Production & QC
6
Complete Inspection & Shipment

Material Comparison Guide

Filament TypeColor StructurePrinted AppearanceTypical ApplicationsWhen to Choose It
Gold / Silver / Copper Gradient Silk PLAGold → Silver → Copper sections repeat along the filament length.Color transitions appear progressively as filament is consumed; visible placement depends on model height and toolpath length.Spiral vases, fluted columns, gear clocks, decorative vessels, figurines, and display models.Choose this SKU when the finished part should show a repeating three-color sequence.
Tri-Color Co-Extruded Silk PLAMultiple color zones remain visible on the same filament strand.Different faces and viewing angles reveal the color zones; it is not a lengthwise spool sequence.Curved sculptures, figurines, and models designed around angle-dependent color faces.Choose co-extrusion when the three colors should remain present together throughout the strand.
Single-Color Silk PLAOne consistent color along the filament length.Uniform color with a reflective silk surface.Vases, ornaments, trophies, figurines, and display shells.Choose it when a consistent color is more important than a changing sequence.
Standard PLAUsually a single pigment color; surface finish depends on grade.Commonly matte, satin, or conventional gloss.Prototypes, educational models, everyday decorative parts.Choose it for general-purpose printing without a specialty silk effect.
PLA+ / PLA ProColor and finish depend on the specific modified formulation.Formulation-dependent; often selected for modified toughness or rigidity.General models, prototypes, and parts where a modified PLA grade is preferred.Choose by the verified mechanical properties of the specific grade, not by appearance alone.

Technical Specifications

Product NameSSSray Gold, Silver & Copper Tri-Color Silk PLA 3D Printer Filament for Ornamental Display Models – Trójkolorowy Filament PLA typu Silk
MaterialPLA Silk (Polylactic Acid) for FDM / FFF printing
Product SeriesSSSray PLA Silk Series – Gold / Silver / Copper Lengthwise Gradient
Color / EffectGold, Silver & Copper Silk Gradient
Color SequenceGold → Silver → Copper → Gold, repeating along the filament length
Color StructureSequential lengthwise color sections; not a three-color co-extruded strand
Surface FinishSilk-gloss finish across the three color sections
Filament Diameter1.75mm
Diameter Tolerance±0.03mm
Net Weight1kg (2.2 lbs)
Gross Weight1.3kg
Spool TypePlastic spool
PackagingVacuum-sealed bag with desiccant
Printing TechnologyFDM / FFF
Printer CompatibilityMost open-material 1.75mm FDM printers, including Bambu Lab, Prusa, Creality, Anycubic, and Elegoo systems; confirm spool clearance and tune the slicer profile.
Typical ApplicationsSpiral vases, fluted columns, decorative clocks, steampunk-style décor, figurines, and display models
OEM / ODMSupported
Compliance & DocumentsRequest current SKU-specific TDS / SDS and confirm the availability and scope of any applicable compliance documents for the supplied formulation and destination market.

Recommended Print Settings

ParameterSSSray Recommended Starting GuidancePerformance / Tuning Range
Nozzle Diameter0.4mm recommendedUse a clean nozzle; select a larger nozzle only when the model and hotend flow support it.
Nozzle Temperature210–230°C; 220°C is a practical starting point190–240°C after temperature and extrusion checks; adjust in small steps and monitor stringing, overhangs, and layer bonding.
Bed Temperature45–60°C; start around 50–55°C on common PEI surfacesSet by build-plate type and adhesion method. Bambu Lab plate profiles vary by plate; follow the selected plate guidance.
Standard Print Speed60–150mm/s for routine decorative printingTune against hotend volumetric flow, nozzle size, cooling, and model geometry.
High-Speed Operating Window120–200mm/s on capable high-speed systemsUp to 250mm/s only after flow, temperature, cooling, and extrusion calibration on suitable high-flow printers.
Outer-Wall Speed30–60mm/sUse the lower end when silk gloss and visible color bands take priority over print time.
Inner-Wall / Infill Speed80–150mm/s starting rangeIncrease only while extrusion remains stable and the hotend stays within its flow limit.
Retraction – Direct Drive0.5–1.2mm at 25–40mm/sFine-tune for the actual extruder and hotend; avoid excessive retraction.
Retraction – Bowden3–5mm at 25–40mm/sAdjust for tube length, hotend path, and stringing results.
Layer Height0.16–0.20mm for general models0.12–0.24mm; use finer layers for small relief details and larger layers for faster decorative builds.
Cooling Fan80–100% after the first 2–3 layersUse adequate cooling for bridges and overhangs while maintaining first-layer adhesion.
Wall Count2–3 perimeters for decorative models3–4 perimeters for larger display pieces or thicker walls.
Infill10–20% for lightweight décor30–50% for larger or heavier display pieces where added internal support is useful.
First-Layer Speed20–30mm/sPrioritize stable first-layer bonding before raising the overall speed.
Bed AdhesionClean smooth or textured PEIClean glass can also be used with a compatible adhesive where required; follow the plate maker’s guidance.
Drying / Moisture RecoveryKeep the spool sealed with desiccant between jobsIf moisture-related popping, stringing, or surface defects appear, dry at 50–55°C for 4–6 hours in a controlled filament dryer.

Print Optimization Guide

Optimization TargetSSSray Printing Guidance
Show the Gold–Silver–Copper SequenceChoose taller or larger models when the design needs room to display more of the repeating color cycle. Short prints may use only part of one sequence.
Plan Color-Band PlacementPrint a small sample with the intended layer height, wall count, and line width first. Visible band placement follows filament consumption and the spool’s cycle position.
Choose Suitable GeometrySpiral vases, fluted columns, long continuous walls, decorative clock housings, and raised reliefs make the sequence easier to read.
Preserve Silk GlossKeep visible outer walls around 30–60mm/s. Increase inner-wall and infill speed separately after flow calibration.
Refine Fine DetailsUse 0.12–0.16mm layers for small gear teeth, numerals, ridges, and ornamental details with a clean 0.4mm nozzle.
Control Temperature & FlowStart near 220°C and tune within 210–230°C for balanced flow and sheen. Check stringing and overhang quality before moving toward the upper tuning range.
Secure the First LayerClean and level the build plate, match bed temperature to the plate, and begin at 20–30mm/s before increasing print speed.
Manage MoistureReturn the spool to a sealed bag or dry box with desiccant after printing. If moisture-related defects appear, dry at 50–55°C for 4–6 hours in a controlled filament dryer.

Printer Brand Starting Settings

Printer Brand / FamilyNozzleBedStarting SpeedSetup Notes
Bambu Lab A / P / X Series210–230°CFollow the selected plate’s PLA profile80–150mm/s inner / infillKeep visible outer walls around 30–60mm/s. Bed settings vary by build plate; validate flow before increasing internal speed.
Prusa MK / CORE Series210–230°C50–60°C60–120mm/s inner / infillStart with a clean PEI sheet, strong part cooling, and controlled outer walls.
Creality Ender / K Series210–230°C50–60°C50–100mm/sConfirm Bowden or direct-drive extrusion and tune retraction before longer prints.
Anycubic Kobra Series210–230°C45–55°C50–100mm/sCalibrate flow and cooling before raising acceleration or infill speed.
Elegoo Neptune Series210–230°C45–55°C50–100mm/sUse a PLA profile as the base and tune the outer wall for the required silk sheen.

These are SSSray starting references, not locked printer presets. Sustainable speed depends on hotend volumetric flow, nozzle size, cooling, acceleration, build plate, and model geometry. The 250mm/s upper window is for suitable high-flow systems after calibration, not a universal setting.

Performance Characteristics

CharacteristicProduct BehaviorWhat It Means in Finished Prints
Three-Color SequenceGold → Silver → Copper repeats along the filament length.Color placement changes with extrusion length, model height, wall count, and the spool’s position in its repeating cycle.
Silk Surface ReflectionReflective silk-gloss finish across the three color sections.Highlights curved walls, fluted profiles, raised edges, and faceted decorative surfaces.
Color-Band PlacementSequential color feed during printing.Longer toolpaths and taller models generally provide more room for the color transitions to appear; small models may show only part of a cycle.
Diameter Control1.75mm nominal diameter with ±0.03mm stated tolerance.Supports controlled feeding when paired with a clean nozzle and calibrated slicer profile.
Print-Speed Profile60–150mm/s routine starting range; up to 250mm/s after high-flow calibration.Separate outer-wall speed from inner walls and infill to balance throughput with visible silk finish.
Material PositioningPLA Silk decorative filament.Designed for decorative and display parts rather than sustained high-temperature or load-bearing engineering applications.

Applications

ApplicationSuitabilityWhy the Gold–Silver–Copper Sequence Fits
Spiral Vases & Fluted VesselsExcellentLong continuous walls and rising profiles provide space for the repeating color sequence to appear.
Decorative Clocks & Gear ModelsExcellentGold, silver, and copper give mechanical-style décor a distinctive three-tone finish.
Steampunk & Vintage-Inspired DécorExcellentThe warm gold and copper tones paired with cool silver suit decorative mechanical forms and ornamental details.
Figurines & Sculptural ModelsVery GoodTaller forms and curved surfaces can reveal more of the sequential color transition.
Display Pieces & GiftwareVery GoodThe three-color Silk PLA finish gives retail samples and decorative gifts a recognizable visual identity.
Short Functional PartsProject-DependentSuitable for non-heavy-load decorative parts; the visible print may not consume enough filament to show a complete color cycle.

Storage Guide

  • Keep unopened spools in the original vacuum-sealed bag with the supplied desiccant.
  • After opening, return the filament to a sealed moisture-barrier bag or dry box with desiccant between print jobs.
  • Store in a cool, dry place away from direct sunlight, heat sources, and dust.
  • Keep the spool protected from ambient moisture during longer production runs.
  • If popping, stringing, or surface defects indicate moisture uptake, dry at 50–55°C for 4–6 hours in a controlled filament dryer.

OEM / ODM Services

We manufacture and supply PLA Silk filament for distributors, wholesalers, importers, retailers, and private-label brands. For this Gold / Silver / Copper gradient SKU, we support neutral packaging, custom labels, branded boxes, spool presentation, and project-based private-label requirements. Our production and sales teams confirm the color sequence, product specification, and packaging details before scheduling an order.

MOQ Reference: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.

Quality Control

  • We monitor filament diameter during extrusion against the stated ±0.03mm tolerance.
  • We inspect spool winding appearance before packing.
  • We check vacuum packaging and sealing condition.
  • We verify desiccant inclusion in the individual pack.
  • We maintain batch follow-up for order consistency.
  • We review shipment preparation before dispatch.

For the inspection approach and buyer-side qualification process, see our 3D printer filament test protocol and batch QC data and COA process.

Compliance & Technical Documents

  • TDS – contact our sales team to request the current technical data sheet applicable to this SKU and confirm its revision.
  • SDS / MSDS – request the safety data sheet applicable to the supplied formulation and destination market.
  • RoHS / REACH – any declaration or test report must be checked for scope and applicability to the exact formulation and destination market before it is used for procurement approval.
  • CE – CE marking is not a generic certification for raw filament; it applies only when the supplied product falls within relevant EU legislation.
  • Third-party testing – for project-specific testing, we confirm the laboratory, sample, test method, and report scope with the buyer before testing begins.

Frequently Asked Questions

What is the color sequence of this Gold / Silver / Copper Silk PLA?

The filament follows a repeating Gold → Silver → Copper → Gold sequence along its length. The colors enter the print one after another as the spool feeds through the nozzle; they are not three co-extruded colors visible together across one filament cross-section.

Will every printed model show all three colors?

Not necessarily. The visible color distribution depends on model size, print height, wall count, extrusion length, and the spool’s position in its repeating cycle. Taller or larger models generally provide more room for the transitions to appear, while a small print may show only part of one cycle.

Which models show the Gold / Silver / Copper sequence most clearly?

Spiral vases, fluted columns, decorative clock housings, gear models, steampunk-style ornaments, and taller sculptural pieces provide longer print paths for the color sequence to develop.

What print settings should I use first?

Start at 210–230°C nozzle temperature, 45–60°C bed temperature, and 60–150mm/s overall print speed. Keep visible outer walls around 30–60mm/s for the silk surface. Suitable high-flow printers can be tuned toward 250mm/s after flow, temperature, cooling, and extrusion checks.

Which 3D printers are compatible with this 1.75mm filament?

It is suitable for most open-material 1.75mm FDM printers, including common Bambu Lab, Prusa, Creality, Anycubic, and Elegoo systems. Confirm spool clearance, build-plate settings, hotend flow, and the slicer profile on the target machine.

What is the MOQ for this product?

Neutral packaging typically starts from 50 rolls. OEM packaging usually ranges from 500 to 1,000 rolls depending on customization scope.

Can SSSray provide OEM or private-label packaging?

Yes. We support OEM / ODM and private-label cooperation for qualified B2B buyers. Options include custom labels, branded boxes, and custom spool design.

Are sample orders available?

Qualified B2B buyers may request up to 3 free sample rolls (1 kg per roll) for product evaluation, subject to project review and availability. Please contact our sales team to confirm eligibility and arrange the samples.

What technical and compliance documents can be provided?

Contact our sales team to request the current TDS and SDS / MSDS applicable to this SKU and confirm the document revision. Any RoHS / REACH declaration or third-party report must be checked against the exact formulation and destination market. CE is not a generic certification for raw filament.

Does this filament require a heated bed?

A heated bed of 45–60°C is the general starting range. The exact setting depends on the build plate and adhesion method; follow the plate manufacturer’s guidance and confirm first-layer adhesion before a long print.

What is the lead time?

Standard orders are typically 7–15 working days. Customized orders are typically 15–25 working days depending on production arrangement.

Add Gold / Silver / Copper Silk PLA to Your Filament Range

Contact our factory team for bulk pricing, sample evaluation, print-profile discussion, and OEM / ODM packaging for this tri-color gradient Silk PLA.