Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

SSSray Light Gray Matte PLA for Terrain Models & Functional Stands – 1.75mm 3D Printer Filament, filamento PLA mate gris claro
Light Gray Matte PLA for Topographic Reliefs, Architectural Models & Functional FDM Parts.
We manufacture this neutral light gray PLA Matte for topographic reliefs, architectural massing and functional FDM parts. Its opaque, low-sheen surface—not metallic, silk or glossy—keeps contour lines and flat panels visually clear. The 1.75mm SKU is specified at ±0.03mm and supplied on a 1kg plastic spool, vacuum-sealed with desiccant. Its 40–250mm/s tuning range supports everyday FDM printing, with speed selected according to hotend flow, nozzle, layer height and model geometry.
MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.
Lead Time: Standard orders 7–15 days; customized orders 15–25 days.
SSSray Light Gray Matte PLA Overview
SSSray manufactures Light Gray Matte PLA filament for topographic relief models, architectural massing and functional FDM parts. Its opaque, low-sheen surface keeps contour details and flat panels clear without metallic, silk or glossy effects. This 1.75mm SKU is specified at ±0.03mm diameter tolerance and supplied on a 1kg plastic spool, vacuum-sealed with desiccant. The 40–250mm/s tuning range supports everyday FDM workflows; set print speed according to hotend flow, nozzle, layer height and part geometry. Neutral packaging starts at 50 rolls, while OEM packaging typically starts at 500–1,000 rolls. We manufacture in Jinhua, Zhejiang, and coordinate export shipments through Ningbo.
Light Gray Matte PLA for Topographic Relief & Architectural Models
Choose this shade when the printed form should lead the presentation. The neutral light gray separates raised and recessed features, while the opaque matte surface keeps reflections subdued. It gives distributors a practical color option for relief maps, site models, miniature scenery and presentation parts without metallic, silk or glossy effects.
Key Selling Points
Neutral Light Gray Tone
A slightly cool, opaque gray for topographic and architectural models that call for a restrained, stone-like appearance.
Matte Surface for Relief Detail
The low-sheen, opaque finish keeps highlights restrained across contour lines, ridges, valleys and broad model surfaces.
40–250mm/s FDM Speed Range
Keep visible outer walls detail-focused and increase infill or long-path speeds as the printer’s hotend flow allows.
Controlled Diameter & Smooth Feeding
The 1.75mm ±0.03mm specification supports consistent filament feeding; tune nozzle temperature and flow for smooth extrusion on your printer.
Neat Winding & Sealed Packing
Orderly spool winding supports smooth payout; vacuum packaging with desiccant helps protect filament during storage and transit.
Factory-Direct B2B Supply
Neutral packaging starts at 50 rolls, with OEM packaging programs typically from 500–1,000 rolls.
Key Product Features & Buyer Benefits
| Feature | Practical Buyer Benefit |
|---|---|
| Opaque Light Gray Color | Adds a versatile neutral SKU for model-making, architecture and education ranges, distinct from gradient or dual-color matte products. |
| Low-Sheen Matte Surface | Keeps surface reflections restrained on relief maps, miniature landscapes and architectural massing models. |
| 1.75mm Diameter / ±0.03mm Tolerance | Provides a clear dimensional target for purchasing and incoming QC, supporting steady feeding and smooth extrusion with a calibrated PLA profile. |
| 40–250mm/s Speed-Tuning Window | Allows buyers to configure detail-focused perimeters and faster infill or long paths around the printer’s available extrusion flow. |
| 1kg Plastic Spool | Fits familiar retail, reseller and print-farm replenishment formats. |
| Vacuum-Sealed Bag + Desiccant | Helps limit moisture exposure between factory packing, warehouse storage and customer use. |
| Neutral MOQ 50 / OEM 500–1,000 Rolls | Creates a practical route from wholesale trial orders to branded retail programs. |
Commercial Value for Wholesale Buyers
For distributors, Light Gray Matte PLA adds a neutral color option between white and darker gray in a PLA Matte assortment. Its restrained appearance suits education, architectural presentation and model-making ranges where form and surface detail should remain the focus. Pair it with other SSSray PLA Matte colors to build a coordinated shelf range.
We manufacture this filament at our Jinhua, Zhejiang facility. Our in-house team handles material preparation, extrusion, winding, quality inspection and packaging. Across our product range, our factory operates a 10,000m² manufacturing facility with 50+ extrusion lines and published maximum capacity of up to 35 tonnes per day and up to 1,000 tonnes per month. We export to 50+ countries and coordinate international shipments through Ningbo, China.
10,000m²
Manufacturing facility in Jinhua, Zhejiang, China.
50+ Lines
In-house filament extrusion lines for material and color production planning.
35t/day · 1,000t/month
Published maximum factory-wide production capacity across the product mix.
For wholesale buyers, neutral packaging starts at 50 rolls. Private-label packaging typically starts at 500–1,000 rolls. We can review the target quantity, destination market, label artwork and carton plan before confirming the production schedule.
Our B2B Production & Export Workflow
PLA Matte vs Other 3D Printing Materials
| Material | Surface / Visual Characteristics | Typical Applications | Printing Conditions & Material Differences |
|---|---|---|---|
| SSSray Light Gray Matte PLA | Opaque, neutral light gray with a low-sheen matte surface. | Topographic relief models, architectural massing, miniature scenery and educational models. | PLA-style open-frame FDM workflow; recommended nozzle 205–220°C and bed 50–55°C, with a 40–250mm/s speed-tuning window on suitable systems. |
| Standard PLA | Surface sheen varies by formulation; often available in glossy or semi-gloss finishes. | General prototypes, education, fixtures and everyday decorative parts. | Similar low-temperature FDM process; use the temperature and flow profile for the selected grade. |
| PLA+ / PLA Pro | Appearance depends on pigment and modifier package; matte appearance is not inherent to every grade. | General-purpose parts where a modified PLA formulation is preferred. | Usually remains within a PLA-like processing workflow, but temperature and mechanical behavior vary by formulation. |
| PETG | Often has a more reflective surface and greater flexibility than PLA grades. | Brackets, containers, housings and parts requiring more ductility. | Typically uses higher nozzle temperatures than PLA; stringing and retraction tuning require attention. |
| ABS / ASA | Surface finish varies; ASA is selected for outdoor weatherability. | Enclosures, technical housings and parts exposed to higher service temperatures or outdoor conditions. | Higher-temperature printing; an enclosure and controlled thermal environment are commonly used. |
Choose Light Gray Matte PLA when neutral appearance, clear relief detail and a familiar PLA workflow lead the brief. For higher service temperatures, outdoor exposure or different impact requirements, compare PETG, ABS or ASA against the part’s actual operating conditions.
Technical Specifications
| Product Name | SSSray Light Gray Matte PLA Filament, 1.75mm, 1kg |
|---|---|
| Brand | SSSray |
| Product Series | SSSray PLA Matte Series – Neutral Color Range |
| Material | PLA Matte (Polylactic Acid) |
| Color | Light Gray, neutral to slightly cool tone |
| Color Effect | Soft matte, solid opaque single color; no metallic, silk or gloss effect |
| Visual Reference | Concrete gray / cloud gray |
| Filament Diameter | 1.75mm standard for this SKU |
| Other Diameter Options | 2.85mm for selected products or separate confirmed orders |
| Diameter Tolerance | ±0.03mm |
| Net Weight | 1kg per spool |
| Other Spool Weights | 3kg / 5kg formats available on request |
| Gross Weight | 1.3kg per packaged unit |
| Spool Type | Plastic spool |
| Packaging | Vacuum sealed with desiccant |
| Printing Technology | FDM / FFF |
| Print Speed Profile | 40–250mm/s tuning range for suitable FDM systems; set speed by feature and available hotend flow |
| Printer Compatibility | Most open-material 1.75mm FDM printers, including Bambu Lab, Prusa, Creality, Anycubic, Flashforge and Elegoo models |
| Recommended Applications | Topographic relief models, architectural massing, miniature scenery, geography teaching aids and functional stands |
| Compliance | RoHS compliant |
| Technical Documents | TDS / SDS available on request |
| Neutral Packaging MOQ | 50 rolls |
| OEM Packaging MOQ | 500–1,000 rolls |
| Standard Lead Time | 7–15 days |
| Customized Lead Time | 15–25 days |
| Trade Terms | FOB Ningbo / EXW |
Recommended Print Settings
| Parameter | Recommended Starting Value | Usable Range / Adjustment |
|---|---|---|
| Nozzle Temperature | 205–220°C | 190–230°C |
| Heated Bed Temperature | 50–55°C | 45–60°C |
| Print Speed | 80–150mm/s | 40–250mm/s; use the upper range on FDM systems with sufficient hotend flow |
| Detail Outer-Wall Speed | 40–80mm/s | Reduce for fine contour lines, small ridges and visible model faces |
| Infill / Long-Path Speed | 120–180mm/s | Raise progressively toward 250mm/s after flow and extrusion checks |
| Direct Drive Retraction | 0.8–1.2mm | 0.6–1.5mm |
| Bowden Retraction | 4–6mm | Adjust to extruder and hotend design |
| Retraction Speed | 30–40mm/s | 20–40mm/s |
| Layer Height | 0.16–0.20mm | 0.08–0.28mm with a suitable nozzle |
| Cooling Fan | 80–100% | Ramp up after the first 2–3 layers; tune for bridges and small features |
| Wall Count | 3 perimeters | 2–4 perimeters |
| Decorative Infill | 15–20% | Adjust to model geometry |
| Functional Stand Infill | 40–60% | Adjust to load, orientation and wall design |
| First Layer Speed | 20–30mm/s | 15–30mm/s |
| Bed Adhesion | Clean PEI / textured PEI / glass | Use a plate-compatible adhesive when required by the build surface |
| Nozzle Diameter | 0.4mm for fine relief detail | 0.6mm for higher throughput on larger features; recalibrate line width and flow |
250mm/s flow setup tip: at 0.4mm line width and 0.2mm layer height, 250mm/s requests roughly 18–20mm³/s of volumetric flow with common 0.4mm-nozzle line widths. Set the slicer’s maximum volumetric speed to the level your filament–hotend combination can sustain. Keep visible outer walls slower and assign higher speeds to infill and longer paths.
Print Optimization Guide
| Optimization Item | SSSray Printing Guidance |
|---|---|
| Speed Profile Planning | Separate outer-wall, inner-wall and infill speeds. Keep visible model surfaces at 40–80mm/s and raise infill or long paths progressively toward 150–250mm/s when hotend flow allows. |
| Topographic Relief Detail | Use a 0.4mm nozzle with 0.12–0.16mm layer height to define contour lines, narrow ridges and small elevation transitions. |
| Matte Outer-Wall Finish | Maintain consistent wall speed and cooling; avoid abrupt speed changes across broad visible panels. |
| High-Speed Flow Control | Run a flow test before increasing the slicer speed ceiling. Watch for under-extrusion, extruder clicking and weak line bonding. |
| Functional Stand Structure | Use 3–4 walls and 40–60% infill as a starting design profile; choose hinge orientation and wall thickness around the intended load. |
| Overhangs & Bridges | Keep cooling active and reduce bridge speed when unsupported spans begin to sag. |
| Retraction & Travel | Calibrate retraction separately for Direct Drive and Bowden systems; avoid excessive retraction that can interrupt high-speed feeding. |
| First-Layer Adhesion | Clean the build plate, verify nozzle-to-bed distance and keep the first layer at 15–30mm/s. |
| Moisture Management | Return unused filament to a sealed bag or dry box with desiccant after printing. |
| Seam Placement | Place the Z-seam on the rear or a less visible edge of phone stands and presentation models. |
SSSray Printer Test Reference Settings
The starting values below come from SSSray’s printer testing on the listed brands. They are practical reference settings rather than a universal profile for every model; actual results depend on the specific printer, hotend flow, nozzle, layer height, acceleration and slicer settings.
| Printer Brand | Nozzle Temperature | Bed Temperature | Starting Speed | Speed Optimization Focus |
|---|---|---|---|---|
| Bambu Lab | 205–220°C | 50–55°C | 100–150mm/s; tune suitable paths toward 250mm/s | Use the PLA profile as a base; calibrate flow and set the slicer volumetric limit before raising infill speed. |
| Prusa | 205–220°C | 50–60°C | 60–120mm/s; higher speeds with high-flow configurations | Respect the lower of the filament and hotend maximum volumetric-flow limits. |
| Creality | 205–220°C | 50–60°C | 80–150mm/s on high-speed models | Calibrate flow, pressure advance and cooling; keep detailed outer walls slower. |
| Anycubic | 205–220°C | 50–60°C | 60–120mm/s; raise on high-speed models | Check the specific hotend’s flow capacity and first-layer behavior before increasing the speed ceiling. |
| Flashforge | 205–220°C | 50–60°C | 80–150mm/s on high-speed models | Start from a PLA profile, then tune infill and long paths after a flow check. |
| Elegoo | 205–220°C | 50–60°C | 60–120mm/s | Increase speed in stages while checking extrusion consistency, cooling and surface definition. |
Use these tested values as a starting point, then confirm the final profile on the exact printer model and intended part geometry before production.
Performance Characteristics
| Characteristic | Product / Material Behavior | Practical Use |
|---|---|---|
| Surface Appearance | Opaque light gray with a soft, low-sheen matte finish. | Keeps relief contours, architectural edges and broad panels visually understated. |
| Color Character | Neutral to slightly cool concrete / cloud gray. | Works as a neutral base color for relief maps, site models and desktop products. |
| Diameter & Feeding | 1.75mm with ±0.03mm tolerance; orderly spool winding. | Provides a defined QC target and supports steady filament payout and smooth extrusion with a calibrated profile. |
| Print-Speed Profile | 40–250mm/s tuning window. | Supports detail-focused perimeters and faster infill on FDM systems with adequate extrusion flow. |
| Cooling Profile | 80–100% fan after the first 2–3 layers as a starting profile. | Helps define bridges, overhangs and small raised features. |
| Low-Warping PLA Workflow | PLA generally has lower warping tendency than ABS / ASA in common open-frame FDM use. | Use a clean build plate, stable first layer and suitable cooling for broad model bases and flat panels. |
| Thermal Use | Standard PLA application range. | Best positioned for display, education and everyday desk products rather than prolonged high-heat service. |
| Functional Part Design | Part behavior depends on wall count, infill, print orientation and geometry. | Design phone stands and hinges around the actual load and use conditions. |
Applications of Light Gray Matte PLA
| Application Focus | Practical Notes |
|---|---|
| Topographic Relief Maps | Light gray separates raised ridgelines, recessed valleys and contour steps without a strong color effect competing with the printed model. |
| Architectural Massing & Site Models | A neutral concrete-gray tone suits building volumes, site layouts, urban blocks and presentation models. |
| Geography & Geology Teaching Aids | Use for landform sections, elevation demonstrations, watershed models and classroom teaching models. |
| Tabletop Terrain & Miniature Bases | Provides a neutral base for rocky ground, stone textures, terrain tiles and scenery components. |
| Phone & Tablet Stands | The matte gray finish suits functional workstation accessories; set wall count, infill and hinge geometry around the intended load. |
| Desk Organizers & Holders | Suitable for pen trays, cable holders, tool organizers and compact workstation accessories. |
| Retail & Design Prototypes | Use for neutral presentation mock-ups where shape, dimensions and surface transitions need to remain easy to inspect. |
Storage Guide for PLA Matte Filament
- Keep unopened spools in the original vacuum-sealed bag with the included desiccant until use.
- After opening, return the spool to a moisture-resistant resealable bag or dry box and keep desiccant with the filament.
- Store in a cool, dry area away from direct sunlight, heaters and prolonged high-temperature exposure.
- Keep the spool covered between print jobs, especially in humid workshops or production rooms.
- If you hear popping or see bubbles and rough extrusion, dry the filament using a controlled PLA drying profile and a spool-safe temperature before the next production run.
OEM / ODM & Private Label Services
At SSSray, we work directly with distributors, importers, retail brands and print-farm suppliers to build filament programs around their market positioning. Light Gray Matte PLA can be supplied as a neutral wholesale SKU or developed into a private-label product with your brand identity, retail packaging and export carton presentation.
Our OEM / ODM coordination covers custom spool labels, retail box artwork, barcode and carton marks, packaging formats, product-line color planning and Pantone / RAL color-matching discussions. We manage extrusion, winding and packaging at our Jinhua factory, then coordinate export packing and shipment arrangements to match the approved order specification. OEM packaging typically starts at 500–1,000 rolls.
For a broader brand program, visit our Private Label 3D Printer Filament and Custom PLA Filament service pages.
Quality Control & Batch Inspection
We inspect Light Gray Matte PLA against the agreed order specification, from in-line extrusion monitoring through finished-spool and export-packaging checks. For PLA-family materials, our published batch QC benchmarks include ±0.03mm diameter precision, maximum ovality of 0.020mm, moisture of no more than 0.02%, and color accuracy of ΔE < 0.8. The measured values for each shipment are recorded in its batch Certificate of Analysis (COA).
- Diameter and ovality: Online dual-axis laser measurement monitors filament dimensions during extrusion; out-of-spec sections are automatically removed from the production line.
- Moisture: Karl Fischer moisture testing checks the material after dehumidification and before vacuum sealing.
- Color consistency: Spectrophotometer readings are compared with approved Pantone/RAL references to maintain shade consistency between production lots.
- Finished-spool inspection: We check the 1kg net-weight requirement, spool condition, winding quality and filament payout.
- Print validation: Sampled spools undergo print checks appropriate to the material and production requirements.
- Packaging and traceability: We check vacuum sealing, desiccant inclusion, carton details and batch identification before dispatch.
Each shipment includes a batch COA documenting measured lot values. Review our Batch QC Data & COA standards or ask our team for the COA matched to your shipment’s Batch ID.
Compliance & Technical Documents
- RoHS compliance: This Light Gray Matte PLA is RoHS compliant. We maintain product-specific RoHS documentation for this SKU and can provide the applicable declaration or supporting report for B2B compliance review.
- TDS: The product technical data sheet can be requested for specification review and material qualification.
- SDS / MSDS: The applicable safety data sheet can be requested for handling, purchasing and import documentation.
Share your destination market and documentation requirements in your RFQ. Our team can include the relevant product files in your material-qualification and order documentation package.
Light Gray Matte PLA: Buyer FAQs
1. What is the MOQ for SSSray Light Gray Matte PLA?
Neutral packaging starts at 50 rolls. OEM packaging typically starts at 500–1,000 rolls, depending on the approved label, box format and order configuration.
2. What does the Light Gray Matte color look like?
It is a solid, opaque light gray with a neutral-to-slightly-cool tone, close to concrete or cloud gray. The finish is soft matte, with no metallic, silk or glossy effect.
3. Can I print this PLA Matte at 250mm/s?
The recommended speed-tuning window is 40–250mm/s. Start around 80–150mm/s, then increase infill and long-path speeds on an FDM printer with sufficient hotend flow. Keep visible outer walls slower when contour definition matters.
4. Is this a dedicated high-speed filament grade?
No. Light Gray Matte PLA belongs to our PLA Matte Series and uses a 40–250mm/s speed-tuning window for compatible FDM workflows. It is not the separate dedicated high-speed filament grade. If your production target calls for a higher-speed material program, contact us about the SSSray High-Speed Filament range.
5. Which printers can use this 1.75mm filament?
It is suitable for most open-material 1.75mm FDM printers, including Bambu Lab, Prusa, Creality, Anycubic, Flashforge and Elegoo systems. Select the PLA material profile, check spool clearance and calibrate flow for your specific hotend.
6. What are the recommended nozzle and bed temperatures?
Start with 205–220°C at the nozzle and 50–55°C on the heated bed. The adjustment ranges are 190–230°C for the nozzle and 45–60°C for the bed. Fine-tune cooling, flow and first-layer adhesion for the printer and build plate.
7. Can I request samples or develop private-label packaging?
Qualified B2B buyers may apply for up to 3 complimentary full-size 1kg sample rolls after review. Sample freight is confirmed by destination and shipping route before dispatch. We also support custom labels, retail boxes, carton marks and private-label programs; OEM packaging typically starts at 500–1,000 rolls. Apply through our B2B filament sample program.
8. What are the lead time and shipping terms?
Standard orders are scheduled for 7–15 days and customized orders for 15–25 days. Our stated trade terms are FOB Ningbo / EXW, with Ningbo, China as the port of loading. Standard payment is 30% deposit and 70% before shipment.
Build Your Topographic & Architectural PLA Range with SSSray
Add a neutral light gray to your PLA Matte assortment for topographic models, architectural presentations and education projects. We manufacture and pack filament at our Jinhua, Zhejiang facility and support wholesale supply, sample qualification and private-label orders for international buyers.
Send us your target quantity, destination market and packaging requirements. We will coordinate the product specification, sample route, quotation and export plan with your team.



