Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

SSSray Matte PLA 3D Printer Filament 1.75mm in Olive Green – matný PLA filament olivově zelený for Detailed Display Models
Factory-direct olive green matte PLA for distributors, private-label brands, retailers and professional model makers.
We produce this solid, opaque olive green with a muted gray undertone and a flat, low-sheen finish. It gives botanical sculptures, flower busts, terrain props and mechanical display models a calm, non-glossy appearance—without a silk, metallic or gradient effect.
MOQ: Neutral packaging from 50 spools; OEM packaging typically 500–1,000 spools.
Lead Time: Standard orders 7–15 working days; customized orders 15–25 working days.
Product Overview
At SSSray, we manufacture Olive Green Matte PLA for 1.75mm FDM/FFF printing programs that need a consistent, low-sheen display color. This solid, opaque mid-tone olive sits between army green and muted moss, with a slight gray undertone. The matte surface keeps reflected highlights subdued on botanical sculptures, flower busts, terrain and diorama props, decorative accessories, and non-load-bearing mechanical display prototypes.
Each spool contains 1kg net filament on a plastic spool (1.3kg gross), with a stated ±0.03mm diameter tolerance and vacuum-sealed packaging with desiccant. Neutral-packaging orders start at 50 spools; OEM packaging typically starts at 500–1,000 spools. From our Jinhua, Zhejiang factory, we coordinate sample evaluation, print-setting guidance, label and carton planning, and export orders on FOB Ningbo or EXW terms. Send us your target quantity, destination, and printer setup so we can confirm the supply plan.
Why This Olive Green Matte PLA Stands Out
Olive Green adds a muted, opaque shade to our PLA Matte range for botanical forms, heritage-style displays, terrain scenes, and architectural landscape models. Its low-sheen surface keeps reflections restrained on curved and sculpted pieces, helping visible contours read clearly under showroom and product-photography lighting. For distributors building a coordinated matte-color assortment, this SKU provides an alternative to brighter greens, black, and high-gloss finishes. Explore our PLA Matte filament range to compare the available finishes.
Key Selling Points
Olive Green with a Gray Undertone
We supply a solid, opaque army/moss-green shade that gives botanical, terrain and heritage-style display collections a distinct place in your color range.
Low-Sheen Finish for Display Work
The flat matte surface keeps reflected highlights subdued on curved forms, helping sculpted contours and presentation details remain visually clear.
Made for Botanical and Terrain Models
Use this muted olive tone for flower busts, leaf studies, diorama props, miniature scenery and decorative display pieces.
Defined 1.75mm Supply Specification
We supply this SKU to a 1.75mm nominal diameter with a stated ±0.03mm tolerance for clear purchasing and incoming-inspection criteria.
High-Speed FDM Profile Support
Start at 50–100mm/s on standard systems; high-flow FDM platforms can be tuned toward 250mm/s with nozzle temperature and maximum volumetric flow calibrated.
Wholesale and Private-Label Supply
We accept neutral-packaging orders from 50 spools and typically arrange OEM packaging programs from 500–1,000 spools.
Commercial Value for Wholesale Buyers
Our Jinhua, Zhejiang factory operates 50+ extrusion lines, with production capacity of up to 35 tonnes per day and 1,000 tonnes per month across our filament portfolio. This manufacturing base supports our wholesale and OEM supply programs. For broader material and volume requirements, see our wholesale PLA supply program.
Our B2B Cooperation Process
Material Comparison Guide
| Material | Surface / Material Behavior | Typical Print Conditions | Typical Applications | Selection Consideration |
|---|---|---|---|---|
| Matte PLA | Low-sheen surface; PLA-based stiffness; opaque color options. | Typically 190–230°C nozzle and 45–60°C bed; high part cooling after the first layers. | Display models, figurines, decorative parts and visual prototypes. | Choose when display appearance and a familiar PLA workflow matter; use PETG or an engineering polymer when the part needs greater heat or service-load capability. |
| Standard PLA | Usually a smoother or glossier surface, depending on formulation and color. | Typically around 190–220°C nozzle and 45–60°C bed. | General models, prototypes, educational parts and everyday prints. | Choose when a conventional PLA finish and broad material availability are preferred. |
| PLA+ / PLA Pro | Modified PLA formulation; impact and layer-bonding behavior vary by manufacturer. | Often within a similar PLA temperature window; follow the individual product profile. | General-purpose parts and prototypes needing a formulation-specific balance of toughness and printability. | Compare the supplier’s mechanical data rather than assuming all PLA+ grades share the same properties. |
| PETG | Typically tougher and more ductile than PLA; can show stringing and a glossier surface. | Commonly higher nozzle and bed temperatures than PLA; cooling is usually more moderate. | Functional fixtures, covers, containers and parts needing greater toughness. | Choose for functional requirements where PETG’s material behavior is appropriate; validate dimensional and chemical requirements. |
| ABS / ASA | Engineering thermoplastics with higher heat capability; shrinkage and warping need management. | Higher nozzle and bed temperatures; an enclosure is commonly recommended. | Functional housings, automotive-related prototypes and outdoor-facing ASA parts. | Choose when heat or outdoor performance is required and the printer supports controlled high-temperature printing. |
Comparison values are general material-family guidance. Individual formulations, printer hardware and slicer profiles can change the recommended conditions.
Technical Specifications
| Product Name | SSSray Olive Green Matte PLA 3D Printer Filament, 1.75mm, 1kg Spool |
|---|---|
| Material | PLA Matte (matte-finish polylactic acid) |
| Printing Process | FDM / FFF 3D printing |
| Product Series | SSSray PLA Matte Series – Low-Sheen Finish for Display Models & Mechanical Prototypes |
| Color | Olive Green; solid, opaque mid-tone olive / army green with a slight gray undertone |
| Surface Finish | Soft matte, flat and low-sheen; no gloss, silk, metallic or gradient effect |
| Nominal Filament Diameter | 1.75mm |
| Diameter Tolerance | ±0.03mm |
| Net Filament Weight | 1kg per spool |
| Gross Weight | 1.3kg per packaged spool |
| Spool Type | Plastic spool |
| Packaging | Vacuum-sealed bag with desiccant |
| Printer Compatibility | Most open-material 1.75mm FDM printers, subject to spool clearance and printer-specific material settings |
| Typical Applications | Botanical sculptures, flower busts, terrain and diorama props, decorative accessories and non-load-bearing mechanical display prototypes |
| OEM / ODM | Supported for private labels, branded packaging, labels, barcodes and approved spool or color programs. |
| Compliance & Documents | RoHS compliant; applicable RoHS documentation, TDS and SDS/MSDS are available for buyer review. |
Recommended Print Settings
| Parameter | Recommended Starting Value | Practical Range / Notes |
|---|---|---|
| Nozzle Temperature | 205–215°C standard; 215–230°C for high-speed tuning | 190–230°C overall working range; raise temperature gradually as speed increases and check extrusion, layer bonding and surface finish. |
| Heatbed Temperature | 50–55°C | 45–60°C; use 55–60°C for larger footprints or when the first layer needs additional adhesion support. |
| Print Speed | 50–100mm/s standard; 100–250mm/s high-speed tuning | 40–250mm/s machine-setting range, depending on hotend flow, nozzle size, layer height, cooling and model geometry. Calibrate maximum volumetric flow before using the upper band. |
| Retraction – Bowden | 3–6mm distance | Start within this range at 25–40mm/s; calibrate to the printer’s Bowden path. |
| Retraction – Direct Drive | 0.8–1.2mm distance | Start at 30–40mm/s; fine-tune for the extruder path and avoid excessive retraction. |
| Layer Height | 0.16–0.20mm | 0.12–0.28mm; use 0.12–0.16mm for fine sculpted detail and 0.20–0.28mm for faster general models. |
| Part Cooling Fan | 80–100% after the first 1–2 layers | Keep cooling low on the first layer, then increase progressively for overhangs and crisp sculpted details while checking layer bonding. |
| Wall Count | 3 walls | 2–4 perimeters depending on model shell and intended use. |
| Infill | 15–20% for decorative models | 40–60% for parts needing more internal support; infill does not make PLA suitable for high-load service. |
| First-Layer Speed | 25–40mm/s | 20–50mm/s on calibrated systems; reduce speed for large contact areas, textured plates or detailed first-layer geometry. |
| Bed Adhesion | Clean PEI build plate | Smooth or textured PEI is a practical starting surface; use a plate-compatible adhesive on glass when specified by the surface manufacturer. |
| Build Plate Preparation | Clean and dry surface | Remove oils and dust; confirm levelling and Z-offset before longer prints. |
For high-speed work, increase speed in controlled steps, raise nozzle temperature within the stated range and calibrate the printer’s maximum volumetric flow. Keep outer walls slower than infill when the visible matte finish and fine relief details are the priority.
Print Optimization Guide
| Print Objective | Recommended Adjustment | What to Check |
|---|---|---|
| Fine Sculpted Details | Use 0.12–0.16mm layer height and reduce outer-wall speed. | Check petal edges, shallow curves and small relief features before starting a production run. |
| Even Matte Appearance | Keep extrusion temperature and print speed consistent across visible walls. | Compare surface appearance on a sample printed with the intended production profile. |
| First-Layer Adhesion | Clean the PEI plate, confirm levelling and Z-offset, and use the stated 50–55°C bed starting point. | Check first-layer contact before running large or long prints. |
| Stringing or Fine Strands | Calibrate retraction for the Bowden or direct-drive path and check filament condition and nozzle cleanliness. | Change one setting at a time so the cause of the improvement is clear. |
| Large Flat Models | Add a brim where narrow corners or a broad footprint need extra support; avoid cold drafts. | Check corner lift during the first layers. |
| Olive Green Color Approval | Print and approve a physical sample under the target retail or studio lighting. | Use the approved sample as the color reference for the OEM order. |
Printer Ecosystem Starting References
| Printer Ecosystem | Nozzle | Bed | Print Speed | Setup Guidance |
|---|---|---|---|---|
| Bambu Lab | 210–230°C | 50–60°C | 80–250mm/s | Use a PLA-compatible profile; on high-flow models, calibrate maximum volumetric flow and keep outer walls slower for a uniform matte surface. |
| Prusa | 205–220°C | 55–60°C | 50–180mm/s | Start with the machine-generation PLA profile; increase speed only within the installed hotend’s flow capacity. |
| Creality | 205–230°C | 50–60°C | 60–250mm/s | High-flow models can use the upper speed band after flow calibration; conventional models should start at 50–100mm/s. |
| Anycubic | 205–225°C | 50–60°C | 60–230mm/s | Begin with a PLA profile, confirm extruder and hotend capacity, then tune cooling for the model’s overhangs. |
| Flashforge | 205–225°C | 50–60°C | 60–230mm/s | Use the PLA material profile as a baseline and confirm extrusion flow before longer high-speed runs. |
Use these ranges as initial tuning references, not as model-specific presets for every printer in each brand. The usable speed depends on the exact model, hotend flow, nozzle diameter, layer height, firmware and slicer profile. Confirm the profile on your own machine and calibrate maximum volumetric flow before using the upper speed range.
Application Scenarios
| Application | Why Buyers Choose This Finish |
|---|---|
| Botanical Sculptures and Flower Busts | The muted olive tone complements plant-inspired forms, leaf studies and sculpted surface details. |
| Terrain, Railway and Diorama Props | The opaque army/moss-green shade suits miniature scenery, landscape details and heritage-style displays. |
| Mechanical Display Prototypes | The matte surface keeps reflections subdued when presenting linkage geometry, contours and assembly concepts that are not load-bearing parts. |
| Decorative Accessories and Design Samples | The low-sheen finish gives retail display pieces, visual teaching aids and design iterations a consistent color option. |
Storage Guide
- Keep the spool sealed in its original vacuum bag with desiccant until it is ready for use.
- After opening, return unused filament to a resealable moisture-barrier bag or dry storage container.
- Store in a cool, dry indoor area away from direct sunlight and heat sources.
- Keep the filament away from dust, oils and prolonged exposure to humid ambient air.
- If printing shows moisture-related symptoms such as popping, inconsistent extrusion or excess stringing, dry the spool using a filament-dryer procedure suitable for PLA and the equipment manufacturer’s instructions.
OEM / ODM Services
We work with distributors, importers, wholesalers and private-label brands on material, color, packaging and order-volume requirements. For this Olive Green Matte PLA SKU, projects can start with neutral packaging or move to branded labels, retail boxes and a coordinated PLA Matte color range. Send us your label artwork, target quantity and destination market so we can confirm feasibility and the production plan. See our OEM/ODM manufacturing service for the full private-label scope.
| Customization Area | Available Project Discussion |
|---|---|
| Private-Label Branding | Brand labels, spool stickers, barcode placement and product identification. |
| Retail Packaging | Neutral packaging, branded cartons, printed boxes and export carton labeling. |
| Color Range Planning | Standard color selection and custom color discussion subject to sample approval and MOQ. |
| Spool Options | Standard plastic spool or custom spool requirements subject to feasibility and order quantity. |
| Product Documentation | We provide the applicable RoHS documentation, current TDS and SDS/MSDS for buyer review. |
Quality Control Checkpoints
- Incoming material review: our production team checks the approved material and Olive Green color target before extrusion.
- Diameter monitoring: we monitor the 1.75mm nominal diameter against this SKU’s ±0.03mm tolerance requirement.
- Extrusion and appearance checks: we review filament surface, color consistency and visible process defects during production.
- Winding inspection: we inspect spool winding and presentation to support orderly feeding during printing.
- Weight and packaging check: we verify the 1kg net unit, 1.3kg gross weight, vacuum seal and desiccant inclusion.
- Batch and shipment review: we match order identification, labels, carton arrangement and shipment documents against the approved order before dispatch.
Review our filament test protocol and batch QC records for our B2B qualification and inspection workflow.
Compliance & Technical Documents
- RoHS: This Olive Green Matte PLA is RoHS compliant. We can provide the product-specific RoHS declaration and supporting test report for buyer and compliance review.
- TDS: The current Technical Data Sheet for this material is available for product specification and print-process review.
- SDS / MSDS: The applicable Safety Data Sheet is available for handling, storage, transport and workplace review.
- Additional market documents: Tell us your destination market and required standard; our team will confirm the applicable documents for the product and order.
TDS and SDS/MSDS serve different purposes: the TDS covers product and processing information, while the SDS covers safe handling and storage. We can provide the current applicable files for your purchasing and technical review.
Frequently Asked Questions
What is the MOQ for Olive Green Matte PLA?
Neutral packaging starts at 50 spools. OEM packaging typically starts at 500–1,000 spools, depending on the approved label, retail box and customization scope.
Can I request samples before placing a bulk order?
Qualified B2B buyers can request up to 3 free full-size 1kg sample spools after project review. Standard preparation takes 3–5 working days; freight is confirmed for your destination before dispatch. Apply through our B2B sample program.
Which 3D printers can use this 1.75mm filament?
This filament is intended for most open-material 1.75mm FDM printers, including Bambu Lab, Prusa, Creality, Anycubic and Flashforge systems. Check spool clearance, extruder path and the material profile for your exact printer model before printing.
What print settings should I start with?
Use the recommended print-settings table as the starting reference for nozzle and bed temperature, speed, retraction, layer height and cooling. For high-speed printing, calibrate maximum volumetric flow and increase speed in controlled steps; keep outer walls slower when surface appearance and fine detail matter.
What does the Olive Green color and matte finish look like?
It is a solid, opaque mid-tone olive or army green with a slight gray undertone. The surface is flat and low-sheen, without a silk, metallic, glossy or gradient effect. Review a physical sample under your intended lighting before approving a private-label color.
What are the spool weight and packaging details?
Each spool contains 1kg net filament. The specified gross weight is 1.3kg per packaged spool. The standard format uses a plastic spool and vacuum-sealed bag with desiccant.
Can SSSray provide OEM and private-label packaging?
Yes. We handle private-label discussions for brand labels, spool stickers, barcodes, retail boxes, export-carton labels, color-range planning and selected spool requirements. OEM packaging typically starts at 500–1,000 spools.
Which compliance and technical documents can I request?
We provide the applicable RoHS documentation, current TDS and SDS/MSDS for this Olive Green Matte PLA. Tell our team your destination market and document requirements, and we will send the relevant files for your purchasing and technical review.
Build Your Olive Green Matte PLA Program with SSSray
Tell us your target market, order quantity, printer profile and packaging brief. Our factory sales team will confirm the sample route, production schedule, OEM options and FOB Ningbo or EXW quotation for this Olive Green Matte PLA SKU.




