Engineering Composite Series | 20% GF | Factory-Direct B2B Supply

Onyx Black Glass-Fiber PPS Filament (PPS-GF) from SSSray – 유리섬유 강화 PPS 필라멘트 for Slotted Adapter Plates & Tube Clamps

20% glass-fiber reinforced PPS engineered for high-stiffness adapter plates, tube clamps, ribbed brackets and industrial machine-mounting hardware.

Onyx Black is a distinct SSSray PPS-GF20 formulation and SKU from our existing Jet Black PPS-GF20. Built on a 20 wt% glass-fiber reinforced PPS formulation, it provides 64.1 ± 2.1 MPa XY tensile strength, 4,552.0 ± 54.6 MPa XY Young’s modulus and 236.3°C HDT at 0.45 MPa after 130°C × 10h annealing. This page is focused on slotted adapter plates, split-collar tube clamps and machine-mounting hardware, with a deep matte black industrial finish and geometry-focused process guidance.

Factory-Direct Engineering Supply
7–15 Days Standard Lead Time
FOB Ningbo / EXW
B2B Sample Qualification
20% Glass Fiber 236.3°C HDT @ 0.45 MPa 4.55 GPa XY Young’s Modulus OEM / ODM Support
MaterialPPS + 20% GF
SeriesEngineering Composite
Color EffectOnyx Black Matte
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Nozzle Temp310–350°C
Bed Temp80–90°C
Print SpeedUp to 250 mm/s
PackagingVacuum + Desiccant
Spool TypePlastic Spool

MOQ: Neutral packaging from 50 spools; OEM packaging typically 500–1,000 spools.

Lead Time: Standard orders 7–15 days; customized orders typically 15–25 days.

Product Overview

Onyx Black PPS-GF is a separate SSSray PPS-GF20 formulation and SKU from our existing Jet Black PPS-GF20. This 20 wt% glass-fiber reinforced polyphenylene sulfide grade uses a performance baseline of 64.1 ± 2.1 MPa XY tensile strength, 4,552.0 ± 54.6 MPa XY Young’s modulus, 102.3 ± 3.7 MPa XY bending strength and 4,110.7 ± 124.9 MPa XY bending modulus from printed specimens.

For slotted adapter plates, split-collar tube clamps, ribbed support brackets and machine-mounting hardware, the glass-fiber reinforcement supports rigidity and dimensional control around slots, bores, ribs and mating surfaces. Thermal reference values are 236.3°C HDT at 0.45 MPa, 125.8°C HDT at 1.8 MPa and 272.5°C Vicat softening temperature; the reference specimens were annealed at 130°C for 10 hours. The deep Onyx Black surface gives finished hardware a restrained matte appearance with fine glass-fiber texture.

Why This Onyx Black PPS-GF Stands Out

This Onyx Black PPS-GF20 formulation is built around mounting geometry that buyers can qualify directly: slot width, clamp bore, split gap, bolt preload, rib junctions and mating surfaces. Its 20 wt% glass-fiber reinforcement, 4.55 GPa-class XY Young’s modulus and 236.3°C HDT at 0.45 MPa after annealing support rigid, dimensionally controlled hardware for elevated-temperature service. The Onyx Black finish also keeps the visual identity distinct from metallic, silk or carbon-fiber black products.

Key Selling Points

236

236.3°C HDT @ 0.45 MPa

Reference printed specimens reach 236.3°C HDT at 0.45 MPa after 130°C × 10h annealing.

20%

20% Glass-Fiber Reinforced

Raises stiffness and dimensional control for slots, clamp bores, ribs and other geometry-sensitive industrial features.

4.55

4.55 GPa XY Young’s Modulus

Reference printed specimens measure 4,552.0 ± 54.6 MPa in XY, supporting rigid mounting and alignment features.

102

102.3 MPa XY Bending Strength

Reference printed specimens measure 102.3 ± 3.7 MPa in XY for stiff brackets, clamps and support structures.

0.6

Wear-Resistant Nozzle Workflow

A hardened steel, tungsten-carbide or ruby nozzle is recommended; 0.6mm is a practical production starting point for glass-filled flow.

B2B

Factory-Direct OEM Supply

Neutral supply, private labels, branded packaging and project-based qualification are available for engineering-material buyers.

Key Features

Feature Practical Buyer Benefit
PPS + 20% Chopped Glass Fiber Creates a high-stiffness engineering composite for functional machine hardware and industrial fixtures
64.1 ± 2.1 MPa XY Tensile Strength Provides a measured printed-part strength reference for rigid adapter plates, clamps and mounting components
4,552.0 ± 54.6 MPa XY Young’s Modulus Supports low-flex mounting geometry, clamp bodies and alignment-sensitive hardware
102.3 ± 3.7 MPa XY Bending Strength / 4,110.7 ± 124.9 MPa XY Bending Modulus Supports stiff ribbed brackets and support structures exposed to bending loads
236.3°C HDT @ 0.45 MPa / 125.8°C @ 1.8 MPa Provides load-specific heat-deflection references after 130°C × 10h annealing
272.5°C Vicat Softening Temperature Provides an additional thermal reference for the PPS-GF20 formulation

Application Value for Adapter Plate & Tube Clamp Programs

This Onyx Black PPS-GF20 page is intentionally centered on adjustable adapter plates, split-collar tube clamps, ribbed support brackets and machine-mounting interfaces. Buyers can qualify this separate Onyx Black formulation against practical geometry such as elongated-slot accuracy, bore diameter, split-gap control, bolt preload and mating-surface fit.

For OEM and private-label programs, we can keep the Onyx Black formulation consistent while changing label, box, barcode, carton marking and project documentation around the buyer’s adapter-plate or clamp program. This keeps the selected material baseline stable while the commercial presentation is customized for the target application.

How We Work

1
Application Review
2
Specification Confirmation
3
Sample Qualification
4
Packaging & Label Approval
5
Batch Production
6
QC & Export Shipment

Material Comparison Guide

Material Material Behavior Typical Printing Condition Typical Use Key Difference
PPS-GF High-stiffness glass-fiber reinforced PPS with very low moisture absorption 310–350°C hotend, 80–90°C bed, room-temperature chamber, cooling fan off and wear-resistant nozzle Adapter plates, tube clamps, brackets, fixtures and machine hardware Combines high thermal capability with glass-fiber stiffness and dimensional control
PPS-CF Carbon-fiber reinforced PPS with high stiffness and carbon-filled surface appearance 310–350°C hotend, stable enclosure and wear-resistant nozzle; active chamber heating not required for baseline printing Rigid tooling, mounts and high-performance industrial components Carbon reinforcement changes electrical, surface and mechanical behavior
PPA-GF Glass-fiber reinforced high-temperature polyamide High nozzle temperature with strict moisture management Structural brackets, tooling and engineering components Polyamide chemistry is generally more moisture-sensitive than PPS
PA-GF Glass-fiber reinforced nylon family Engineering-temperature hotend with dried filament Fixtures, housings, brackets and mechanical parts Lower processing temperature but greater moisture sensitivity than PPS-GF

Technical Specifications

Product Name Onyx Black Glass-Fiber PPS Filament (PPS-GF) from SSSray – 유리섬유 강화 PPS 필라멘트 for Slotted Adapter Plates & Tube Clamps
MaterialPolyphenylene Sulfide reinforced with 20% chopped glass fiber
Product Series SSSray Engineering Composite Series – PPS-GF20 Black
Color / Effect Onyx Black – deep neutral near-black with slight charcoal cast, matte finish and fine glass-fiber glints
Glass Fiber Content20 wt%
Filament Diameter1.75mm; 2.85mm available subject to production program
Standard Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Formulation IdentitySeparate SSSray Onyx Black PPS-GF20 formulation and SKU; not the same formulation as the existing Jet Black PPS-GF20
Density1.36 g/cm³ at 23°C (ISO 1183)
Tensile StrengthXY 64.1 ± 2.1 MPa; Z 22.9 ± 0.8 MPa (ISO 527)
Young’s ModulusXY 4,552.0 ± 54.6 MPa; Z 2,557.2 ± 101.2 MPa (ISO 527)
Elongation at BreakXY 2.0 ± 0.2%; Z 1.1 ± 0.1% (ISO 527)
Bending StrengthXY 102.3 ± 3.7 MPa; Z 45.7 ± 1.1 MPa (ISO 178)
Bending ModulusXY 4,110.7 ± 124.9 MPa; Z 2,605.7 ± 101.8 MPa (ISO 178)
Heat Deflection Temperature236.3°C @ 0.45 MPa; 125.8°C @ 1.8 MPa (ISO 75; reference specimens annealed at 130°C × 10h)
Vicat Softening Temperature272.5°C (ISO 306)
Equilibrium Water Absorption0.11% at 70% RH, 23°C
Recommended Processing Window310–350°C nozzle; 80–90°C bed; room-temperature chamber; cooling fan off; up to 250 mm/s
Drying Reference100°C for 10 hours if the material has absorbed moisture
Annealing Reference130°C for 10 hours when the listed annealed mechanical and thermal reference performance is required
Continuous Use Temperature200–220°C
Spool TypePlastic spool
PackagingVacuum sealed with desiccant
Nozzle Requirement Hardened steel, ruby or tungsten-carbide wear-resistant nozzle recommended
Printer Requirement Industrial high-temperature FFF/FDM system capable of sustained 310–350°C nozzle temperature with a wear-resistant nozzle; room-temperature chamber is the reference baseline
Typical Applications Slotted adapter plates, split-collar tube clamps, ribbed support brackets, machine mounts, jigs and industrial fixtures
OEM / ODMSupported

Recommended Print Settings

Parameter Recommended Guidance
Recommended Nozzle Temperature310–350°C
Printed-Specimen Reference330–350°C
Recommended Bed Temperature80–90°C
Printed-Specimen Reference90°C
Recommended Print SpeedUp to 250 mm/s
Production Starting Range40–150 mm/s, then increase only after flow, layer bonding and dimensional quality are confirmed on the target printer
Layer Height 0.16–0.28mm for functional parts; 0.20mm is a strong starting point
Cooling Fan0% for normal printing; keep cooling off unless a specific bridge or small feature requires localized tuning
Direct-Drive Retraction1–3mm at approximately 20–40 mm/s
Bowden Retraction2–3mm at approximately 20–40 mm/s
Wall Count3–5 perimeters for functional hardware
Infill 40–60% for engineering parts; increase toward 100% for demanding validation specimens or load-focused designs
First Layer Speed15–25 mm/s
ChamberRoom temperature; active chamber heating is not required for the reference profile
Nozzle Material Hardened steel, ruby or tungsten-carbide nozzle for abrasive glass-fiber filament
Drying Before Printing100°C for 10 hours if moisture has been absorbed
Bed Adhesion High-temperature PEI or compatible engineering build surface with a suitable adhesion promoter

Print Optimization Guide

Item Practical Guidance
Drying & Feeding Dry at 100°C for 10 hours if the filament has absorbed moisture, then keep the spool sealed or feed from a dry environment during long industrial jobs
Nozzle Selection Use an abrasion-resistant nozzle; 0.6mm provides useful process margin for glass-filled extrusion
Slot Accuracy Measure elongated slots after cooling and tune XY compensation before batch production
Tube Clamp Fit Qualify bore diameter, split gap and bolt-clamping geometry on the production printer before locking the final CAD tolerance
Rib Intersections Use sufficient wall thickness and stable extrusion flow to keep rib junctions sharp and fully filled
Chamber Control Use room-temperature chamber conditions as the reference baseline; keep the environment stable for geometry-sensitive parts
Large Adapter Plates Use a stable enclosed environment and consistent first-layer adhesion before increasing speed on long slotted geometries
Annealing When additional crystallinity or heat performance is required, 130°C for 10 hours is a practical post-print reference; measure dimensional change on representative parts before releasing the production process

Industrial Printer Starting Settings

Printer Platform Nozzle Bed Chamber Starting Speed SSSray Starting Guidance
INTAMSYS FUNMAT PRO 310 NEO 330–350°C 80–90°C Enclosed; active heat optional 50–120 mm/s Officially supports PPS-GF and provides a 100°C active heated chamber; use an abrasion-resistant nozzle and qualify slot and bore dimensions before production.
INTAMSYS FUNMAT PRO 310 APOLLO 330–350°C 80–90°C Enclosed; active heat optional 50–120 mm/s Suitable industrial platform for high-temperature reinforced materials; use the PPS-GF process window as the starting point and tune flow for the selected nozzle.
CreatBot PEEK-300 330–350°C 80–90°C Enclosed; active heat optional 40–80 mm/s 480°C hotend, 200°C bed and 120°C heated chamber provide sufficient thermal headroom for controlled PPS-GF processing.
INTAMSYS FUNMAT PRO 610HT 330–350°C 80–90°C Enclosed; active heat optional 50–120 mm/s Large-format industrial system with up to 500°C nozzle and 300°C chamber; suitable when larger PPS-class fixtures require tightly controlled thermal conditions.
Other Industrial High-Temperature FFF Systems 330°C start 90°C start Stable enclosure; active heat optional 40–100 mm/s Confirm hotend temperature, heated-chamber capability, abrasive-material nozzle and dry-filament workflow before production use.

These SSSray starting settings are aligned to the Onyx Black PPS-GF20 reference processing window. Onyx Black is a separate formulation and SKU from the existing Jet Black PPS-GF20. Final tuning should focus on extrusion flow, slot dimensions, clamp fit and the nozzle size used for production.

Performance Characteristics

Characteristic SSSray PPS-GF Reference Production Relevance
Glass-Fiber Reinforcement 20 wt% Raises stiffness and improves dimensional control for rigid mounting hardware
Tensile Strength XY 64.1 ± 2.1 MPa / Z 22.9 ± 0.8 MPa Provides a printed-part strength reference for adapter plates, clamp bodies and mounting components
Young’s Modulus XY 4,552.0 ± 54.6 MPa / Z 2,557.2 ± 101.2 MPa Supports rigid, low-flex mounting geometry and alignment-sensitive hardware
Bending Performance XY 102.3 ± 3.7 MPa strength / 4,110.7 ± 124.9 MPa modulus Supports stiff ribbed brackets, clamps and support structures under bending loads
Heat Deflection 236.3°C @ 0.45 MPa / 125.8°C @ 1.8 MPa Reference values from printed specimens annealed at 130°C × 10h
Vicat Softening Temperature 272.5°C Provides an additional thermal reference for the PPS-GF20 formulation
Equilibrium Water Absorption 0.11% at 70% RH, 23°C Confirms low moisture sensitivity while retaining a dry-handling workflow for clean high-temperature extrusion
Surface Appearance Deep Onyx Black matte finish with visible fine glass-fiber glints Gives industrial hardware a clean technical appearance without metallic or carbon-fiber styling

Applications

Application Focus Practical Notes
Slotted Adapter Plates High stiffness and dimensional stability support elongated slots, countersunk holes and adjustable mounting geometry
Split-Collar Tube Clamps Suitable for rigid clamp bodies where bore accuracy, split geometry and bolt preload must remain controlled
Ribbed Support Brackets Glass-fiber reinforcement supports stiff rib structures and compact load paths where bracket deflection must be controlled
Machine Mounting Hardware Well matched to holders, positioning components and mounting interfaces exposed to elevated temperatures
Industrial Jigs & Fixtures 4.55 GPa-class XY Young’s modulus and 236.3°C HDT at 0.45 MPa after annealing support demanding production-support tooling
High-Temperature Assembly Fixtures Suitable where ordinary PLA, PETG or standard nylon does not provide sufficient thermal margin
Chemical-Exposure Fixtures The PPS matrix is well suited to many aggressive industrial environments when the specific chemical and service temperature are matched to the application

Storage Guide

  • Keep unopened spools in their original vacuum-sealed packaging until required
  • Store opened filament in a sealed dry container with fresh desiccant
  • Dry at 100°C for 10 hours if the filament has absorbed moisture
  • Print from a dry environment during long industrial jobs for more stable extrusion
  • Keep filament away from dust, oil and contamination that can affect high-temperature extrusion

OEM / ODM Services

As a filament manufacturer serving global B2B buyers, SSSray supports PPS-GF supply for engineering-material distributors, private-label brands and industrial sourcing teams. Available options include neutral packaging, custom labels, branded retail boxes, barcode or SKU identification, multilingual packaging, carton marking and project-specific packing configurations.

Neutral packaging starts from 50 spools. Customized OEM packaging typically starts from 500–1,000 spools depending on the label, box, spool and packaging program.

Quality Control

  • Diameter and roundness inspection against the confirmed production specification
  • 20% glass-fiber formulation and production-lot identification control
  • Onyx Black color and surface-consistency inspection against the approved reference
  • Winding, spool condition, vacuum sealing and desiccant inspection before packing
  • Representative print validation focused on extrusion stability and functional geometry
  • Batch identification and shipment review for repeat B2B supply

Compliance & Technical Documentation

SSSray provides the technical and compliance documents applicable to the confirmed PPS-GF production grade and destination market. Buyers can request the current TDS, SDS/MSDS and available compliance or third-party documentation together with the RFQ so the correct document package is matched to the order.

Frequently Asked Questions

What is the MOQ for Onyx Black PPS-GF?

Neutral packaging starts from 50 spools. Customized OEM or private-label packaging typically starts from 500–1,000 spools depending on packaging and labeling requirements.

How much glass fiber does this PPS-GF contain?

This grade uses 20 wt% chopped glass fiber to increase stiffness, dimensional control and flexural performance for industrial functional parts.

What thermal performance does this grade provide?

Reference printed-specimen data for this PPS-GF20 formulation are 236.3°C HDT at 0.45 MPa, 125.8°C HDT at 1.8 MPa and 272.5°C Vicat softening temperature. The HDT reference specimens were annealed at 130°C for 10 hours. The listed SSSray continuous-use temperature remains 200–220°C.

What nozzle should be used?

Use a hardened steel, ruby or tungsten-carbide wear-resistant nozzle. Glass-filled PPS is abrasive and is not intended for prolonged printing through a standard brass nozzle.

How should PPS-GF be dried before printing?

If the filament has absorbed moisture, dry at 100°C for 10 hours, then keep the spool sealed or in a dry feeding environment during printing.

What applications is this Onyx Black grade designed for?

Its primary focus is slotted adapter plates, split-collar tube clamps, ribbed support brackets, machine mounts, industrial jigs and high-temperature fixtures.

Can SSSray provide OEM or private-label PPS-GF?

Yes. We support qualified B2B programs with custom labels, branded boxes, multilingual packaging, barcode or SKU identification and project-based OEM / ODM supply.

Are samples available?

Verified B2B buyers can apply for up to 3 complimentary sample spools for material and printer qualification.

Need PPS-GF for Adapter Plates, Tube Clamps or Machine Mounts?

Send us your printer model, target geometry, expected operating conditions and order volume. Our team can support sample qualification, bulk pricing and OEM / ODM planning directly from the SSSray filament supply program.