Home » 3D Printer Filament Product Catalog » PETG Marble White Filament
PETG Marble Series | Sculpture & Decorative Models | OEM / ODM Support

SSSray PETG Marble White 1.75mm 3D Printer Filament – 화이트 마블 PETG 필라멘트 for Sculpture & Decorative Models

White marble-effect PETG filament for distributors, 3D printing stores, private-label brands, model makers, education buyers, and OEM/ODM programs.

Fine light-gray speckles create a natural stone-like look with a low-sheen finish that works especially well on busts, sculptures, architectural models, planters, display pieces, and other detail-focused PETG prints.

Export-Ready Quality
7–15 Days Lead Time
FOB Ningbo / EXW
Up to 3 Sample Spools
PETG Marble ±0.03mm Vacuum + Desiccant OEM / ODM 50-Spool MOQ
MaterialPETG
SeriesPETG Marble
Color EffectMarble White
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Nozzle Temp230–250°C
Bed Temp70–80°C
Print Speed60–150 mm/s
PackagingVacuum + Desiccant
Spool TypePlastic Spool

MOQ: Neutral packaging from 50 spools; OEM packaging typically 500–1,000 spools.

Lead Time: Standard 7–15 days; customized orders typically 15–25 days.

Product Overview

SSSray PETG Marble White is a 1.75mm decorative PETG filament developed for sculptures, busts, architectural models, planters, display pieces, and other prints where a stone-like finish matters. The white base is dispersed with fine light-gray speckles that create a natural marble appearance without a gradient, metallic effect, or transparency. Its low-sheen surface helps soften visible layer lines and gives detailed models a more mineral, carved look while retaining the toughness and layer bonding associated with PETG.

For distributors, 3D printing stores, private-label brands, and project buyers, we supply this grade in a standard 1kg plastic spool with ±0.03mm diameter tolerance, vacuum sealing, and desiccant. Neutral packaging starts from 50 spools, while OEM packaging programs typically start from 500–1,000 spools. The material is intended for reliable decorative and general-purpose printing when moisture control, first-layer setup, and PETG-appropriate temperatures are maintained. Custom labels, branded boxes, color matching, and coordinated PETG range development are available for qualified B2B programs.

Why This Marble White PETG Works for Decorative Prints

The value of this color comes from the finished surface. Fine light-gray speckles break up a flat white wall and give busts, statues, faceted planters, architectural models, and display pieces a more stone-like appearance without requiring painting or post-processing to create the basic marble look. The PETG base also gives buyers a durable decorative option for parts that may be handled more often than typical display-only PLA prints. For distributors and private-label programs, Marble White is easy to demonstrate visually and can serve sculpture, home décor, education, hobby, and model-making channels from one specialty SKU.

Key Selling Points

±0.03mm Diameter Control

Supports steady feeding and repeatable extrusion across standard 1.75mm FDM/FFF systems.

Stone-Like Marble White

White PETG with fine light-gray speckles creates a natural marble effect for sculpture and décor.

Low-Sheen Surface

Reduces the plastic-like gloss of plain PETG and helps detailed models read more like stone.

PETG Printability

Designed for controlled extrusion, practical layer bonding, and low warping under tuned PETG settings.

Wholesale-Ready Format

1kg plastic spools, vacuum-sealed with desiccant, with neutral supply starting from 50 spools.

OEM / Private Label Support

Custom labels, branded boxes, carton marks, and coordinated PETG range development are available.

Key Features

Feature Practical Buyer Benefit
Marble White with Fine Light-Gray SpecklesCreates a natural stone-like look for sculptures, busts, architecture, planters, and display models
Low-Sheen FinishHelps reduce the plastic-like gloss of plain PETG and softens the visual impact of layer lines
PETG Base MaterialProvides a practical balance of printability, layer bonding, and handling durability for decorative parts
1.75mm / ±0.03mmFits most open-material 1.75mm FDM/FFF printer ecosystems with controlled feeding tolerance
Vacuum Sealed with DesiccantHelps protect the spool from moisture during storage and export transport
Neutral + OEM Supply OptionsSupports 50-spool neutral orders and 500–1,000-spool custom packaging programs

Marble White PETG for Durable Decorative Product Lines

We supply Marble White PETG for buyers who want the stone-like appearance of a marble filament with PETG material behavior rather than a PLA-based decorative grade. The fine white-and-gray speckle effect is well suited to sculptures, classical busts, architectural models, planters, home décor, gift items, and display prototypes that may be handled regularly after printing. For distributors and private-label brands, this creates a clear PETG-specific position alongside standard PETG and PLA Marble ranges instead of competing as another look-alike white decorative SKU. For larger programs, we can coordinate color, label, box, carton marking, and related PETG SKUs through our wholesale PETG filament supply program.

Why Choose This Product

  • Natural Marble White appearance with fine light-gray speckles
  • Low-sheen finish suited to sculpture, architectural and home décor surfaces
  • PETG-based balance of printability, layer bonding and everyday handling durability
  • 1.75mm diameter with ±0.03mm standard tolerance
  • Vacuum-sealed packaging with desiccant for export storage and transport
  • Neutral packaging available from 50 spools for wholesale qualification
  • OEM / ODM support for labels, boxes, carton marks and private-label programs

How We Work

1
Application & Market Review
2
Color, Speckle & Pack Confirmation
3
Sample Qualification
4
Label & Box Approval
5
Batch Production & QC
6
Packing & Shipment Handover

Material Comparison Guide

Material Typical Visual Character Typical Nozzle / Bed Printing Consideration Common Use
PETG MarbleSpeckled, stone-like, low-sheen230–250°C / 70–90°CMoisture control and PETG first-layer tuning are importantSculptures, busts, architecture, planters, décor
Standard PETGSmooth; glossy, solid or translucent options230–260°C / 65–90°CCan string if wet or overheated; strong bed adhesion may need a release layerGeneral-purpose parts, containers, brackets, display parts
PLA MarbleSpeckled, stone-like decorative finish200–230°C / 45–60°CLower-temperature and generally easier open-printer setup than PETGSculpture, models, décor, display pieces
Standard PLASmooth, usually matte to semi-gloss190–230°C / 35–60°CLow warping and broad printer compatibilityPrototypes, models, educational and decorative prints
ABSSolid, usually matte to semi-matte240–270°C / 90–110°CEnclosure and draft control are commonly used to manage warpingFunctional prototypes, housings, workshop parts
ASASolid, usually matte to semi-matte240–270°C / 90–110°CEnclosure is commonly recommended; suited to weather-exposed applicationsOutdoor housings, fixtures, functional exterior parts

Technical Specifications

Product NameSSSray PETG Marble White 1.75mm 3D Printer Filament – 화이트 마블 PETG 필라멘트 for Sculpture & Decorative Models
MaterialPETG (Polyethylene Terephthalate Glycol) for FDM/FFF 3D printing
SeriesSSSray PETG Marble Series – Sculpture & Decorative Model Printing
Color / EffectMarble White with fine light-gray speckles – natural stone-like effect, low-sheen finish
Filament Diameter1.75mm standard; 2.85mm available on request
Tolerance±0.03mm
Net Weight1kg standard; 3kg / 5kg options available on request
Gross Weight1.3kg
Spool TypePlastic spool
PackagingVacuum sealed with desiccant
Printer CompatibilityMost 1.75mm open-material FDM/FFF printers, including Bambu Lab, Prusa, Creality, Anycubic and Elegoo systems
Typical ApplicationsSculptures, busts, architectural models, planters, home décor, display models and decorative prototypes
OEM / ODMSupported for qualified B2B programs
Trade TermsFOB Ningbo / EXW
Technical / Compliance DocumentsSend us your destination market and required files; we will match the available TDS, SDS and applicable test documents to your PETG Marble White order

Recommended Print Settings

Parameter Recommended Guidance
Recommended Nozzle Temperature230–250°C
Usable Nozzle Range225–260°C
Recommended Bed Temperature70–80°C
Usable Bed Range65–90°C depending on build surface
Recommended Print Speed60–150 mm/s
Usable Speed Range40–200 mm/s after flow and surface-quality tuning
Layer Height0.12–0.28mm; 0.16–0.20mm is a useful detail-focused starting range with a 0.4mm nozzle
Cooling Fan0–20% for the first layers; typically 30–60% after layer adhesion is established
RetractionBowden 3–5mm / Direct Drive 0.8–1.5mm as starting references
Wall Count2–4 perimeters
Infill15–20% decorative / 40–60% higher-demand parts
First Layer Speed20–30 mm/s
Bed AdhesionTextured or satin PEI preferred; use an appropriate release layer on smooth PEI or glass if adhesion is too strong
Drying Reference60–65°C for 6–8 hours when moisture symptoms are present or before critical long prints
Nozzle Size0.6mm hardened-steel nozzle recommended for production runs; 0.4mm nozzles can also be used with suitable flow tuning

Print Optimization Guide

Item Guidance
Sculpture Surface FinishStart around 0.16–0.20mm layers and moderate outer-wall speed to keep facial features, folds and edges clean
Marble EffectLarger visible surfaces make the fine gray speckles easier to read; appearance changes naturally with geometry and lighting
Nozzle ClearanceUse a 0.6mm hardened-steel nozzle when you want more particulate clearance and longer-run consistency; 0.4mm remains usable with suitable flow tuning
Stringing ControlDry the filament first, then tune nozzle temperature, travel moves and retraction rather than compensating with excessive retraction
First LayerKeep the build surface clean and avoid over-squishing PETG; excessive adhesion on smooth surfaces can make part removal difficult
Moisture ManagementPopping, rough extrusion, excess stringing or a hazy surface are signs to dry and reseal the spool before continuing

SSSray Starting Settings by Printer Platform

Printer Brand Nozzle Bed Speed Notes
Bambu Lab240–250°C70–80°C80–150 mm/sStart from a PETG profile, then tune flow and outer-wall speed for the marble surface
Prusa235–250°C75–85°C60–120 mm/sSatin or textured PEI is a practical starting surface for PETG
Creality235–250°C70–80°C50–120 mm/sPrioritize first-layer height, dry filament and stable cooling before increasing speed
Anycubic235–250°C70–80°C50–120 mm/sTune temperature and retraction after confirming the generic PETG profile feeds cleanly
Elegoo235–250°C70–80°C50–120 mm/sUse moderate outer-wall speed when sculpture finish is more important than throughput

Start with these SSSray values for the listed printer platforms, then fine-tune flow, cooling and outer-wall speed for your nozzle size, build surface, model geometry and target finish.

Performance Characteristics

Characteristic Material Behavior Production Reference
Surface AppearanceWhite base with fine light-gray speckles and a low-sheen finishDesigned to create a natural stone-like visual effect without paint
Layer-Line VisibilitySpeckled texture breaks up large flat white surfacesMost noticeable on sculptures, busts, planters and faceted models
Warping BehaviorLow when PETG bed temperature and first-layer conditions are correctly setOpen-printer use is practical for many models; large footprints still benefit from draft control
Moisture SensitivityPETG can absorb moisture and show stringing, popping or rough extrusion when wetVacuum packaging plus desiccant is standard; drying is recommended when symptoms appear
Layer BondingDepends on temperature, speed, cooling and moisture conditionUse the recommended temperature window before increasing throughput
Nozzle Consideration0.6mm hardened steel recommended; 0.4mm usable with suitable tuningProvides more clearance for the speckled formulation during long production prints

Applications

Application Focus Practical Notes
Sculptures & Classical BustsFine speckles and low sheen help skin, hair, drapery and carved details read more like stone
Architectural ModelsUseful for columns, façades, monuments, terrain elements and display-scale masonry effects
Planters & Home DécorWorks well on geometric pots, vases, organizers and decorative accessories where a white-stone look is preferred
Display PrototypesGives concept models and presentation pieces a finished decorative appearance directly from the printer
Figurines & Gift ItemsSuitable for decorative characters, souvenirs and gift-oriented printed products
Education & Cultural ModelsUseful for art, history, architecture and classroom display models that benefit from a marble-like visual language

Storage Guide

  • Keep opened spools sealed with fresh desiccant whenever they are not printing
  • For long prints, a dry box or sealed feed container below about 20% RH is a useful target when available
  • If popping, excess stringing or rough extrusion appears, dry at 60–65°C for 6–8 hours before retuning the profile
  • Store away from direct sunlight, heat sources and high-humidity workshop areas
  • After drying, let the spool cool in a dry environment and reseal it instead of leaving it exposed to room air

OEM / ODM Services

We support distributors, importers, 3D printing stores, e-commerce brands and private-label buyers that want to add PETG Marble White to an existing filament range or build a dedicated specialty-PETG line. Available project options include neutral supply, custom spool labels, branded retail boxes, carton marks, barcode placement, color/speckle matching review, and coordination with other PETG colors or effects.

MOQ Reference: Neutral packaging from 50 spools; OEM packaging typically 500–1,000 spools. Standard 1kg plastic spools are the default format; 3kg / 5kg and 2.85mm requirements can be reviewed for project orders.

Quality Control

  • Raw material, base color and marble-speckle formulation check before extrusion
  • Diameter monitoring against the ±0.03mm production target
  • Winding appearance and spool condition inspection
  • Net-weight verification for the packed 1kg spool format
  • Vacuum seal and desiccant inclusion check before boxing
  • Batch appearance, carton mark and shipment preparation review before release

For B2B qualification work, buyers can also use our 3D Printer Filament Test Protocol and Batch QC Data pages when building their incoming-inspection process.

Product Documents & Compliance Support

  • TDS / SDS: Send us your destination market and order requirements, and we will provide the available technical documents for the PETG Marble White grade supplied
  • RoHS / REACH: Send us the destination market and SKU details, and we will provide the matching current report available for the ordered grade
  • Third-Party Testing: Include any required test standard with your RFQ, and we will return the matching document and testing options with our quotation
  • Buyer Documentation: We support product specifications, packing details and commercial documents aligned with the confirmed B2B order

Frequently Asked Questions

What is the MOQ for PETG Marble White?

Neutral packaging starts from 50 spools. OEM / private-label packaging typically starts from 500–1,000 spools depending on label, box and spool customization.

What makes this Marble White different from plain white PETG?

Fine light-gray speckles break up the white base and create a natural stone-like look. The finish is low-sheen rather than clear, metallic or gradient, so it is especially useful for sculptures, busts, architecture and décor.

Is it suitable for most 1.75mm FDM printers?

Yes. It is intended for most open-material 1.75mm FDM/FFF printers that can run normal PETG temperatures, including Bambu Lab, Prusa, Creality, Anycubic and Elegoo systems. Final settings still need to match the printer, build plate and model.

Do I need a 0.6mm or hardened nozzle?

For this Marble White PETG, we recommend a 0.6mm hardened-steel nozzle for production runs and long prints because it provides more clearance for the speckled formulation. A 0.4mm nozzle can also be used with suitable temperature, flow and speed tuning.

Should PETG Marble White be dried before printing?

If the spool has been exposed to humidity, or you see popping, excess stringing or rough extrusion, dry it at 60–65°C for about 6–8 hours and keep it sealed with desiccant after use.

Can you supply samples and OEM packaging?

Yes. Qualified B2B buyers can apply for up to 3 free sample spools after project review. We also support custom labels, branded boxes, carton marks and private-label PETG programs.

What technical or compliance documents can you provide?

Tell us the destination country and the documents your buyer requires. We will provide the available TDS, SDS and applicable test documents for the PETG Marble White grade supplied with your order.

What is the normal lead time?

Standard orders are typically 7–15 days. Customized orders are typically 15–25 days after specification and packaging details are confirmed.

Build Your PETG Marble White Line with SSSray

Send us your target quantity, destination market, packaging format and sample requirement. We can quote factory-direct neutral supply from 50 spools, develop OEM programs from 500–1,000 spools, and coordinate the packaging, production and document support for your PETG Marble White line.