Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

Pink-Blue-Green Silk PLA Filament 1.75mm, Tricolor Gradient by SSSray (Көп түсті жібек PLA филаменті) – Suited to Twisted Helix Sculptures & Lattice Wall Organizers
Factory-made Candy Trio Silk PLA for twisted helix sculptures, five-hook lattice organizers, decorative home products, and distinctive retail filament ranges.
At SSSray, we produce this 1.75mm Silk PLA with a distinctive rose-pink, sky-blue, and leaf-green gradient, linked by short lavender and cyan-green transitions. The reflective silk finish brings out curved helix lines, repeated lattice ribs, and sculptural details, giving distributors a recognizable decorative SKU rather than another single-color PLA option. Each spool carries 1kg net filament on a plastic spool, with a ±0.03mm diameter specification and vacuum-sealed packaging with desiccant. We supply neutral-packaging orders from 50 rolls and develop OEM / ODM programs for distributors, importers, retailers, and private-label brands.
MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.
Lead Time: Standard orders 7–15 days; customized orders 15–25 days.
Trade Terms: FOB Ningbo / EXW.
Product Overview
At SSSray, we manufacture this Pink-Blue-Green Silk PLA for buyers building a decorative filament range with a clear, easy-to-merchandise color story. Along the filament, rose pink with a slight magenta cast moves into clear sky blue and fresh leaf green, with short lavender and cyan-green transitions between the three main color zones. As the filament feeds through an FDM / FFF printer, these color sections travel across the model; the reflective Silk PLA finish brings light across twisted curves, spiral ribs, and open lattice surfaces.
This colorway is especially suited to twisted helix sculptures, five-hook wall organizers, lattice desk accessories, figurines, and display décor. We supply the standard 1.75mm format with ±0.03mm diameter tolerance, 1kg net filament on a plastic spool, and vacuum-sealed packaging with desiccant. Neutral-packaging orders start at 50 rolls, while OEM packaging projects typically start at 500–1,000 rolls. Our team supports sample evaluation, private-label packaging, and factory-direct export supply under FOB Ningbo or EXW terms.
Product Highlights
Three main colors. Two transition shades. One silk-finish filament designed to show its color movement across sculptural and geometric models. Rose pink, sky blue, and leaf green move through the filament in sequence, while lavender and cyan-green soften the handover between color zones. On a twisted helix, the gradient follows the curves and crossing lines; on a lattice organizer, it travels across ribs, hooks, and open spaces. We pair this distinctive Candy Trio colorway with a 1kg spool, 1.75mm diameter, ±0.03mm tolerance, and vacuum-sealed desiccant packaging. SSSray supplies this design-led Silk PLA from a 50-roll neutral-packaging MOQ and supports OEM packaging from 500–1,000 rolls.
Key Selling Points
Three Main Color Zones
Rose pink, sky blue, and leaf green create a clear color sequence along the filament, with lavender and cyan-green transitions.
Reflective Silk Surface
The silk-effect finish catches light across curved walls, raised ribs, and angled faces for a polished decorative appearance.
Made for Twisted Helix Forms
Color movement follows spiral paths and interlaced contours, giving tall sculptures and flowing geometry a distinctive finish.
Open-Lattice Detail
Repeated ribs, intersecting lines, and hook profiles reveal the gradient across multiple viewing angles.
Controlled 1.75mm Format
A defined ±0.03mm diameter specification gives buyers a clear dimensional reference for 1.75mm FDM product lines.
Factory-Direct Supply
We support 50-roll neutral orders, 500–1,000-roll OEM packaging projects, and qualified sample evaluation.
Key Features & Buyer Benefits
| Supply Feature | What It Means for Your Business |
|---|---|
| 1kg Net Filament / Plastic Spool | Fits the familiar unit size used across distributor catalogs, retail shelves, and repeat-purchase filament programs. |
| 1.75mm Diameter / ±0.03mm Tolerance | Gives purchasing and incoming-QC teams a clear dimensional specification for the standard 1.75mm market. |
| Vacuum-Sealed Bag + Desiccant | Helps protect the filament from moisture exposure during storage and before the customer opens the spool. |
| Neutral Packaging from 50 Rolls | Lets distributors introduce the colorway without committing to a full private-label packaging run. |
| OEM Packaging from 500–1,000 Rolls | Creates a practical route for branded labels, retail boxes, barcodes, and market-specific packaging. |
| Up to 3 Sample Rolls for Qualified Buyers | Gives your team full-size material for printer setup, model evaluation, color review, and purchasing approval. |
| Factory-Direct OEM / ODM Cooperation | Connects product selection, packaging, production planning, and export preparation with the manufacturing team. |
Commercial Value for Distributors
Give your decorative filament range a colorway with an identifiable design story. This Candy Trio gradient combines rose pink, sky blue, and leaf green with two transition shades, then adds a reflective Silk PLA surface that works across both flowing and geometric models. Your sales team can demonstrate the colorway through two clear hero applications: twisted helix sculptures that show color movement along curved paths, and lattice wall organizers that carry the gradient across repeated ribs, hooks, and open sections.
For your catalog, one 1kg spool supports multiple product themes—sculptural décor, five-hook organizers, desk accessories, figurines, and gift collections—without requiring a separate material for each display concept. We keep the purchasing route straightforward: neutral packaging starts at 50 rolls, while OEM packaging typically starts at 500–1,000 rolls. Qualified buyers can evaluate up to three sample rolls before confirming a bulk program. For a broader assortment, connect this SKU with the SSSray wholesale 3D printer filament range.
How We Work with B2B Buyers
Material Comparison Guide
| Material | Visual Finish | Typical Printing Conditions | Typical Applications | Choose It When |
|---|---|---|---|---|
| SSSray Pink-Blue-Green Silk PLA | Three-zone gradient with reflective silk sheen. | Nozzle 210–230°C; bed 45–60°C; slower outer walls for gloss. | Twisted helix sculptures, lattice organizers, display décor, figurines. | You want a decorative SKU where color movement and surface reflection help sell the finished model. |
| Standard PLA | Conventional matte, satin, or standard PLA appearance depending on grade. | Commonly 190–230°C nozzle; bed settings depend on the plate. | Concept models, prototypes, toys, and everyday decorative parts. | Print cost, general-purpose use, and solid-color availability take priority over silk gloss. |
| PLA+ / PLA Pro | Usually a conventional PLA surface; formulation varies by manufacturer. | Often around 200–230°C nozzle; follow the selected grade profile. | General-purpose models and parts requiring a different stiffness / toughness balance. | Your project needs a modified PLA grade rather than a gradient silk appearance. |
| PETG | Clear, translucent, or semi-gloss finish depending on grade. | Commonly around 230–270°C nozzle and 60–80°C bed, grade-dependent. | Functional household parts, housings, containers, and utility components. | Application requirements call for PETG’s different toughness, adhesion, or temperature behavior. |
| ABS / ASA | Typically conventional engineering-plastic surface appearance. | Commonly around 240–280°C nozzle and 90–100°C bed; enclosure needs vary. | Heat-exposed or outdoor-oriented parts, subject to the exact grade. | The application needs higher thermal capability and the printer supports the required environment. |
We position this Candy Trio Silk PLA for decorative and display-led products. For a different end-use requirement, our team can help you compare PLA+, PETG, ABS / ASA, and engineering-grade options.
Technical Specifications
| Product Name | Pink-Blue-Green Silk PLA Filament 1.75mm, Tricolor Gradient by SSSray (Көп түсті жібек PLA филаменті) – Suited to Twisted Helix Sculptures & Lattice Wall Organizers |
|---|---|
| Brand | SSSray |
| Product Series | SSSray PLA Silk Series – Candy-Tone Gradient Line for Spiral Sculptures & Home Organizers |
| Material | PLA Silk (Polylactic Acid) with a silk-finish formulation |
| Printing Technology | FDM / FFF 3D printing |
| Color Effect | Candy Trio Silk Gradient: rose pink with a slight magenta cast → sky blue → leaf green; short lavender and cyan-green transition zones. |
| Color Appearance | Bright, non-neon, and non-fluorescent color presentation. |
| Filament Diameter | 1.75mm standard |
| Diameter Tolerance | ±0.03mm |
| Diameter Options | 1.75mm standard; 2.85mm is available for selected products and can be discussed for this project. |
| Net Filament Weight | 1kg per spool |
| Gross Weight | 1.3kg per unit |
| Spool Type | Plastic spool |
| Packaging | Vacuum-sealed bag with desiccant |
| Recommended Nozzle | 0.4mm standard starting nozzle; 0.2mm, 0.6mm, and 0.8mm nozzles can be tuned to the model and printer. |
| Printer Compatibility | Most open-material 1.75mm FDM / FFF printers, including Bambu Lab, Prusa, Creality, Flashforge, Anycubic, and Elegoo platforms. |
| Typical Applications | Twisted helix sculptures, lattice wall organizers, decorative models, figurines, display accessories, and creative projects. |
| OEM / ODM | We support private-label labels, packaging artwork, and project-based product-line development. |
| Standard MOQ | Neutral packaging: 50 rolls |
| OEM Packaging MOQ | Typically 500–1,000 rolls |
| Lead Time | Standard orders: 7–15 days; customized orders: 15–25 days. |
| Trade Terms | FOB Ningbo / EXW |
Recommended Print Settings
| Parameter | SSSray Recommended Setting | Performance Range / Adjustment |
|---|---|---|
| Nozzle Temperature | 210–230°C; start at 215°C | 190–240°C; tune in 5°C steps to balance extrusion and silk gloss. |
| Heated Bed Temperature | 45–60°C; start at 50–55°C | 35–45°C on compatible high-adhesion plates after first-layer checks. |
| General Print Speed | 60–100 mm/s | 50–200 mm/s on suitable high-flow printers after flow calibration. |
| Outer-Wall Speed | 25–40 mm/s | 20–50 mm/s; keep outer walls slower than infill when silk sheen is the priority. |
| Direct Drive Retraction | 0.6–1.2mm at 30–40mm/s | Adjust in small steps to reduce stringing while maintaining consistent extrusion. |
| Bowden Retraction | 4–6mm at 30–40mm/s | Use the installed hotend and Bowden path as the calibration reference. |
| Layer Height | 0.12–0.20mm with a 0.4mm nozzle | 0.08–0.28mm based on model detail, nozzle size, and print time. |
| Part Cooling Fan | 80–100% after the first layers | Use 100% for bridges, narrow ribs, and pronounced overhangs. |
| Wall Count | 2–3 perimeters for decorative models | 3–4 perimeters for organizer bodies and thicker wall sections. |
| Infill | 15–20% for decorative models | 40–60% for a more solid internal structure; infill alone does not establish a load rating. |
| First-Layer Speed | 20–30 mm/s | 15–25 mm/s for small contact areas or detailed first layers. |
| Bed Adhesion | Clean PEI or textured PEI plate | On glass and other smooth surfaces, apply a suitable adhesive layer when the build surface requires it. |
| Drying Before Printing | 50–55°C for 6–8 hours when moisture is present | Use a filament dryer and spool rated for the selected temperature. |
For a balanced first print, use a 0.4mm nozzle, 215°C nozzle temperature, 50–55°C bed, 0.16–0.20mm layer height, and 30–35mm/s outer-wall speed. Increase infill and general speed only after the surface and extrusion profile are stable.
Print Optimization Guide
| Print Objective | SSSray Practical Guidance |
|---|---|
| Show All Three Color Zones | Choose a model and print path that use enough filament to pass through multiple color sections. The visible sequence follows the filament feed and the amount consumed by the model. |
| Bring Out the Silk Gloss | Start at 210–230°C and 60–100mm/s general speed, then keep outer walls around 25–40mm/s for a more even reflective finish. |
| Print Twisted Helix Geometry | Use 0.12–0.20mm layer height for smooth curves and consistent spiral ribs; maintain cooling on narrow sections and overhangs. |
| Print Lattice Organizers | Use 2–3 walls for decorative panels and 3–4 walls for thicker organizer sections. Tune travel and retraction around repeated intersections. |
| Set Up High-Speed Printing | On a suitable high-flow printer, increase general speed toward 200mm/s only after flow calibration; keep the outer wall slower to protect the silk finish. |
| Secure the First Layer | Clean the PEI plate, confirm Z-offset, set the bed to 45–60°C, and print the first layer at 20–30mm/s. |
| Control Stringing | Start with 0.6–1.2mm Direct Drive or 4–6mm Bowden retraction, then tune temperature and retraction in small increments. |
| Keep the Filament Dry | Reseal the spool with desiccant after printing. If moisture-related popping or rough surface defects appear, dry at 50–55°C for 6–8 hours using heat-rated equipment. |
Printer Brand Starting Settings
| Printer Platform | Nozzle | Bed | General Speed | Outer Wall | SSSray Starting Notes |
|---|---|---|---|---|---|
| Bambu Lab | 210–230°C | 35–45°C with suitable plate preparation | 60–120 mm/s | 30–40 mm/s | Start with a Silk PLA profile, check the printer’s flow limit, and keep the outer wall slower for gloss. |
| Prusa | 210–215°C | 55–60°C | 40–80 mm/s | 25–35 mm/s | Begin near 215°C on the first layer, then 210°C; use a clean PEI sheet for adhesion. |
| Creality | 200–220°C | 50–60°C | 50–80 mm/s | 25–40 mm/s | Set retraction for the installed Bowden or Direct Drive extruder before longer prints. |
| Flashforge | 200–230°C | 45–60°C | 60–100 mm/s | 30–40 mm/s | Raise speed after checking extrusion consistency and the silk surface on a sample model. |
| Anycubic | 205–220°C | 50–60°C | 50–80 mm/s | 25–40 mm/s | Use the printer’s PLA profile as the base and tune the first layer for the selected plate. |
| Elegoo | 205–220°C | 45–60°C | 50–80 mm/s | 25–40 mm/s | Check the build-plate temperature range and set outer-wall speed separately from infill. |
These are SSSray starting profiles for common 1.75mm FDM platforms with a 0.4mm nozzle. Set outer-wall speed separately, then tune temperature, flow, retraction, and plate adhesion on your printer.
Performance Characteristics
| Product Characteristic | SSSray Product Detail | What It Means in Use |
|---|---|---|
| Filament Diameter | 1.75mm nominal; ±0.03mm tolerance. | Matches the standard 1.75mm FDM filament format and gives buyers a defined incoming-inspection reference. |
| Color Sequence | Rose pink → sky blue → leaf green, with lavender and cyan-green transitions. | Color zones move through the model in the order the filament feeds, creating a changing finish across larger prints. |
| Silk Surface | Reflective silk-finish PLA surface. | Curved walls, raised ribs, and angled faces catch light; slower outer walls help keep the sheen more uniform. |
| Extrusion Profile | 210–230°C recommended nozzle range. | A tuned temperature and flow profile supports steady extrusion and consistent surface appearance. |
| Spool Handling | Plastic spool with orderly winding. | Organized winding supports controlled feeding through regular print jobs. |
| Warping Behavior | PLA-based material with low warping tendency under a suitable print setup. | Use a clean build plate, a stable first layer, and controlled cooling for larger flat sections. |
| Application Profile | Decorative and display-led Silk PLA. | Best positioned for sculptures, organizers, figurines, and home décor rather than sustained heat or safety-critical load-bearing parts. |
Application Scenarios
| Application Focus | Practical Notes |
|---|---|
| Twisted Helix Sculptures | Spiral contours and interlaced surfaces carry the rose-pink, sky-blue, and leaf-green sequence across the sculpture. |
| Five-Hook Lattice Wall Organizers | Repeated ribs and hook profiles show the gradient across several angles; design the mounting and wall thickness for the intended light-duty use. |
| Geometric Wall & Desk Organizers | Open grids, intersecting ribs, and modular compartments give the silk finish multiple reflective edges. |
| Decorative Wall Hooks | Use for decorative or light-duty designs; validate the printed part, mounting method, and actual load before use. |
| Figurines & Character Models | Color transitions and reflective highlights add visual depth to display-oriented models and collectible designs. |
| Home Accessories & Desk Décor | Suitable for pen holders, trays, display stands, and decorative storage pieces kept away from sustained heat. |
| Retail Gift & Craft Collections | Creates a recognizable color-led SKU for hobby stores, online filament catalogs, maker kits, and seasonal gift ranges. |
Storage Guide
- Keep each unopened spool in its original vacuum-sealed bag with the included desiccant.
- After opening, return the spool to a sealed bag or dry box with fresh desiccant between print jobs.
- Store in a cool, dry area away from direct sunlight, heaters, and high-humidity locations.
- Keep the filament covered while the printer is idle; prolonged exposure to humid air can affect extrusion and surface finish.
- If moisture-related popping or rough surface defects appear, dry the filament at 50–55°C for 6–8 hours using a dryer and spool rated for that temperature.
OEM / ODM & Private Label Services
At SSSray, we manufacture 3D printing filament at our factory in Jinhua, Zhejiang, China. Our 10,000m² manufacturing facility operates 50+ extrusion lines, with total production capacity of up to 1,000 tons per month across our material range. We manage material preparation, extrusion, winding, diameter monitoring, quality checks, and packaging at the factory—giving distributors, importers, and private-label brands a direct route from product selection to repeat supply.
For this Pink-Blue-Green Silk PLA, we support neutral packaging, custom labels, branded retail boxes, barcode and language-label requirements, and product-line planning. Share your target market, order forecast, and artwork; our team will align the material specification, approved color reference, packaging format, and production schedule before the order enters production.
| Service Item | What We Provide |
|---|---|
| Neutral Packaging | Wholesale supply from 50 rolls. |
| OEM Packaging | Typically 500–1,000 rolls, with label and box details approved before production. |
| Private Label | Brand labels, retail box artwork, barcodes, language, and market information. |
| Color & Product-Line Planning | Standard colors and custom color projects, with the approved gradient reference used for production. |
| Spool Options | This SKU uses a standard plastic spool; custom spool programs can be quoted for OEM projects. |
| Samples | Qualified B2B buyers can apply for up to 3 free sample rolls after buyer qualification. |
Explore our factory OEM / ODM program or contact our sales team with your target quantity and packaging plan.
Quality Control
- Material and batch preparation: we prepare the approved PLA Silk formulation and identify the production batch before extrusion.
- Inline diameter monitoring: laser measurement tracks filament diameter during extrusion against the 1.75mm / ±0.03mm specification.
- Colorway inspection: our team checks rose pink, sky blue, leaf green, and the lavender / cyan-green transition zones against the approved color reference.
- Winding and spool inspection: we inspect winding alignment, spool condition, and material handling before packing.
- Print and surface validation: our team runs representative prints to check feeding, extrusion appearance, and silk-finish consistency.
- Packaging and order check: we verify the 1kg net fill, vacuum seal, desiccant, labels, and approved carton arrangement before dispatch.
Technical Documents & Compliance Support
Our technical and sales teams provide the PLA Silk technical and safety documents for the applicable material grade. Send us your destination market and document list with your enquiry; we will prepare the relevant TDS, SDS, declarations, and test reports for your order file.
- TDS: we provide the current PLA Silk technical data for the material grade used in this product.
- SDS: we provide the safety data applicable to the supplied PLA Silk formulation.
- RoHS / REACH: we supply the declarations or test reports that cover the selected material and destination market.
- CE / SGS / Third-Party Testing: we provide applicable documents and coordinate additional independent testing when the destination market requires it.
Visit the SSSray TDS / SDS document center or contact our team with your required document list.
Frequently Asked Questions
What is the minimum order quantity for this Silk PLA filament?
We supply neutral-packaging orders from 50 rolls. OEM packaging typically starts at 500–1,000 rolls, depending on the approved label, retail box, and customization scope.
What colors are included in the Pink-Blue-Green gradient?
We produce the Candy Trio sequence in rose pink with a slight magenta cast, clear sky blue, and fresh leaf green. Short lavender and cyan-green transition zones connect the main colors. The palette is bright, not neon or fluorescent.
Does the filament print with a silk-like surface finish?
Yes. We formulate this PLA Silk grade for a reflective decorative finish. For a more even sheen, start at 210–230°C and keep outer walls around 25–40mm/s; layer height, cooling, and model geometry also shape the final appearance.
Which 3D printers can use this 1.75mm filament?
We supply the standard 1.75mm format for most open-material FDM / FFF printers, including Bambu Lab, Prusa, Creality, Anycubic, Elegoo, and Flashforge platforms. Check spool clearance and the filament feed path on your exact printer model.
What print settings should I start with?
Start at 215°C nozzle temperature, 50–55°C bed temperature, 60–100mm/s general speed, and 25–40mm/s outer-wall speed. Suitable high-flow printers can be tuned toward 200mm/s after flow calibration. Use 80–100% cooling after the first layers.
Can this filament be used for functional wall organizers or hooks?
We recommend it for decorative organizers and light-duty household designs. For hooks expected to carry heavier loads or remain under stress, choose a suitable engineering-grade filament and validate the complete mounting design. We position this Silk PLA for decorative and light-duty organizer designs.
Can SSSray provide private-label packaging and samples?
Yes. We support neutral packaging from 50 rolls and OEM packaging typically from 500–1,000 rolls. Qualified B2B buyers can apply for up to 3 free sample rolls. Our team also handles private-label labels, retail boxes, barcodes, and product presentation.
Which technical and compliance documents can be supplied?
Our document center lists the SSSray PLA Silk TDS and SDS. For RoHS, REACH, CE, or SGS requirements, send us your destination market and document list; our team will provide the reports or declarations that apply to the selected product.
Source Tricolor Silk PLA for Your Next Product Range
Bring this Candy Trio Silk PLA into your decorative filament range with factory-direct supply from SSSray. Send us your target quantity, destination market, preferred packaging, and hero application. Our team will prepare the bulk quotation, sample route, and OEM / ODM plan for your project.



