Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

SSSray PLA-LW Active Foaming Filament 1.75mm – Matte Pastel Blue
Temperature-responsive lightweight PLA-LW for RC aircraft, drones, display models, cosplay shells, and private-label filament programs.
Built for weight-sensitive FDM projects, this active-foaming PLA expands during printing as nozzle temperature rises. Calibrating temperature, speed, and flow lets buyers target lighter structures while the soft pastel-blue matte finish gives large shells and display models a clean, low-glare appearance.
MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.
Lead Time: Standard orders 7–15 working days; OEM/custom orders 15–25 working days.
Product Overview
SSSray PLA-LW Active Foaming Lightweight 3D Printer Filament is engineered for projects where printed-part mass matters as much as appearance. Unlike pre-foamed lightweight PLA, this formulation expands inside the melt zone as printing temperature increases, allowing model density to be tuned together with flow rate and print speed. The pastel-blue color develops a soft matte surface that is especially effective on aircraft skins, large display shells, props, and other broad surfaces where reduced glare and less-visible layer texture improve presentation.
For distributors and private-label buyers, the commercial value is straightforward: one SKU can serve RC aircraft, drone prototyping, cosplay, lightweight display models, educational aerodynamics, and specialist hobby channels. Stable 1.75mm diameter control, vacuum-sealed packaging with desiccant, standard 1kg spool format, and OEM / ODM support make it suitable for repeat wholesale programs. For best results, customers should calibrate foaming temperature and flow for their target wall thickness and weight before full production printing.
Why This Product Stands Out
This PLA-LW is built around a real application advantage: controllable weight reduction. Higher nozzle temperatures increase foaming activity, while calibrated flow keeps wall thickness and part mass under control. That gives experienced users a useful tuning window for lightweight shells without giving up the familiar workflow of PLA-based FDM printing. The pastel-blue matte finish adds a retail-friendly visual identity that fits aircraft, engineering education, scale models, props, and large decorative pieces.
Key Selling Points
Temperature-Controlled Foaming
Tune printed-part density by balancing nozzle temperature, flow rate, and speed.
Stable 1.75mm Feed
±0.03mm diameter control supports repeatable feeding through standard FDM filament paths.
Matte Pastel Blue Finish
Soft low-glare blue surface helps large shells and models look cleaner and more refined.
Weight-to-Volume Efficiency
Active foaming can reduce part mass per printed volume after flow calibration.
Lightweight Application Focus
Well suited to RC aircraft, UAV concepts, cosplay shells, display models, and education.
OEM / ODM Ready
Supports custom labels, packaging, and private-label development.
Key Features
| Feature | Practical Buyer Benefit |
|---|---|
| Temperature-Responsive Foaming | Lets users tune part density for weight-sensitive prints through temperature and flow calibration |
| 1.75mm Standard Diameter | Fits most open-material 1.75mm FDM printer ecosystems used by hobby and professional buyers |
| ±0.03mm Tolerance | Supports stable feeding while users tune foaming, flow, and thin-wall geometry |
| Soft Matte Pastel Blue | Creates a low-glare surface that visually softens layer lines on large-format models |
| Vacuum Sealed with Desiccant | Helps protect foaming consistency and extrusion quality during storage and transport |
| OEM / ODM Support | Useful for private label and custom market programs |
More Printed Volume per Kilogram
SSSray PLA-LW is developed for the same high-expansion active-foaming performance class used in leading lightweight PLA systems: up to 220% volumetric expansion with printed density targeted around 0.54–0.55 g/cm³ after temperature and flow calibration. At the upper end of the foaming window, a 1kg spool can deliver roughly 2.2× the printed volume of standard PLA for comparable external geometry, giving RC aircraft, gliders, UAV shells, cosplay and large display models a stronger weight-to-material-cost advantage without changing the familiar 1kg retail format.
Why Choose This Product
- PLA-based workflow with active-foaming control for specialist lightweight printing
- Soft matte pastel-blue surface with reduced visual glare on broad outer walls
- Low warping tendency when first-layer temperature and adhesion are properly tuned
- Strong fit for RC aircraft, gliders, drone concepts, props, display shells, and education
- 1kg plastic spool format suitable for wholesale and retail channel programs
- Temperature-and-flow tunability gives technical buyers a clear optimization story
- Private label, custom labels, branded boxes, and OEM packaging available
How We Work
Material Comparison Guide
| Material | Visual Appeal | Ease of Printing | Functional Suitability | Typical Use |
|---|---|---|---|---|
| Active Foaming PLA-LW | ★★★★★ | ★★★☆☆ | Excellent for weight-sensitive shells | RC aircraft, UAV concepts, props, lightweight models |
| Pre-Foamed LW-PLA | ★★★★☆ | ★★★★☆ | Consistent low-density printing | Lightweight models with simpler setup |
| Standard PLA | ★★★★☆ | ★★★★★ | General-purpose | Prototypes, décor, everyday models |
| PETG | ★★★☆☆ | ★★★★☆ | Tougher general-purpose use | Functional parts where low mass is not the main target |
Technical Specifications
| Product Name | SSSray PLA-LW Active Foaming Filament 1.75mm 1kg |
|---|---|
| Material | Active Foaming PLA-LW (Lightweight PLA) |
| Series | Lightweight / Foaming PLA Series |
| Color / Effect | Pastel Blue – soft matte finish developed through the foamed surface structure |
| Filament Diameter | 1.75mm standard; 2.85mm available on request |
| Tolerance | ±0.03mm |
| Net Weight | 1kg (2.2 lbs) |
| Gross Weight | 1.3kg |
| Spool Type | Plastic spool |
| Packaging | Vacuum sealed with desiccant |
| Printer Compatibility | Most open-material 1.75mm FDM printers with a stable hotend capable of the selected foaming temperature, including Bambu Lab, Creality, Prusa, Anycubic, and Elegoo |
| Typical Applications | RC aircraft, gliders, UAV concepts, cosplay shells, lightweight display models, educational aerodynamics, large decorative structures |
| OEM / ODM | Supported |
| Certifications | RoHS, SDS/MSDS, TDS, CE; SGS on request |
Recommended Print Settings
| Parameter | Recommended Guidance |
|---|---|
| Recommended Nozzle Temperature | 220–250°C for active-foaming calibration |
| Usable Nozzle Range | 210–260°C starting benchmark; lower temperatures produce denser walls, higher temperatures increase foaming |
| Recommended Bed Temperature | 45–55°C starting range |
| Optional Bed Condition | 35–60°C depending on build plate, first-layer area, and adhesion method |
| Recommended Print Speed | 40–80 mm/s for controlled foaming and consistent thin walls |
| Usable Speed Range | 30–100 mm/s after temperature and flow are calibrated |
| Layer Height | 0.16–0.28mm; 0.20mm is a practical calibration starting point |
| Cooling Fan | Fan ON; start at 100% after the first layers, then reduce only if stronger interlayer bonding requires more retained heat |
| Retraction | Keep retraction minimal: Direct Drive 0–1.0mm / Bowden 0–3.0mm starting window; if foaming becomes unstable, disable retraction and recalibrate |
| Wall Count | 1–3 perimeters; 1–2 for lightweight shells, 2–3 for stronger display structures |
| Infill | 0–15% lightweight shells / 15–25% general models; use ribs or local reinforcement where needed |
| First Layer Speed | 20–30 mm/s |
| Bed Adhesion | Smooth PEI / textured PEI / glass with suitable adhesive when required |
Print Optimization Guide
| Item | Guidance |
|---|---|
| Foaming Calibration | Run a single-wall or calibration-cube test before production; tune temperature first, then flow to the target wall thickness and mass |
| Weight Reduction Focus | Increase foaming temperature within the validated window and reduce flow only after measuring wall thickness and part mass |
| Surface Finish Focus | Use the lower half of the foaming window with slightly higher flow for denser, smoother, more uniform matte walls |
| Stringing / Oozing | Dry filament before critical jobs, limit unnecessary travel, and tune retraction only after temperature and flow are stable |
| Thin-Wall RC Parts | Print one model at a time when practical to keep melt residence time and foaming behavior more consistent |
| Humidity Control | Keep opened spools sealed with desiccant; dry before precision weight or thin-wall calibration work |
Printer Brand Starting Settings
| Printer Brand | Nozzle | Bed | Speed | Notes |
|---|---|---|---|---|
| Bambu Lab X1 / P1 / A1 | 230–250°C | 35–45°C | 60–120 mm/s | Start from a PLA Aero-style profile; calibrate flow ratio before aircraft shells |
| Prusa MK3 / MK4 / CORE One | 225–245°C | 45–55°C | 40–70 mm/s | Use the standard PLA profile only as a machine baseline, then tune temperature and flow for foaming |
| Creality Ender / K1 / K2 | 225–245°C | 45–55°C | 40–80 mm/s | Keep chamber heat low for PLA and prioritize steady outer-wall speed |
| Anycubic Kobra Series | 225–245°C | 45–55°C | 40–70 mm/s | Calibrate a single wall before reducing flow for lighter parts |
| Elegoo Neptune Series | 225–245°C | 45–55°C | 40–70 mm/s | Use moderate acceleration on thin shells and tune flow after temperature |
Start with the profile above, then lock temperature and calibrate flow against the target wall thickness and finished part weight. For repeat orders, save the qualified printer, nozzle, speed, wall geometry, and flow settings as the production baseline.
Performance Characteristics
| Characteristic | Assessment | Notes |
|---|---|---|
| Weight Reduction Potential | ★★★★★ | Developed for up to 220% volumetric expansion and approximately 0.54–0.55 g/cm³ printed density after full temperature-and-flow calibration |
| Density Tunability | ★★★★★ | Temperature and flow can be tuned to target different part weights |
| Matte Surface Finish | ★★★★★ | Foamed structure gives pastel blue a soft low-glare appearance |
| Print Setup Simplicity | ★★★☆☆ | Requires temperature, flow, and thin-wall calibration for best lightweight results |
| Dimensional Feeding Stability | ★★★★☆ | ±0.03mm filament tolerance supports consistent feeding |
| Heat Resistance | ★★☆☆☆ | PLA-LW is not positioned for sustained high-temperature service |
Applications
| Application | Suitability | Notes |
|---|---|---|
| RC Aircraft & Gliders | ★★★★★ | Primary fit for low-mass wings, fuselages, and aerodynamic shells |
| UAV / Drone Concepts | ★★★★★ | Useful for non-load-critical lightweight shells and aerodynamic prototyping |
| Cosplay & Props | ★★★★★ | Lower mass is valuable for large wearable shells and hand-held props |
| Large Display Models | ★★★★★ | Matte pastel-blue finish and reduced mass suit oversized visual models |
| Education & Aerodynamics | ★★★★☆ | Good for demonstrating weight, wall-thickness, and flight-design tradeoffs |
Storage Guide
- Keep unopened and opened spools in a cool, dry environment away from direct heat
- Reseal opened spools with fresh desiccant immediately after printing
- For production printing, keep the feed path and dry box below 20% RH with the spool sealed and desiccant in place to stabilize foaming and flow calibration
- If moisture-related stringing or unstable foaming appears, dry at approximately 50–55°C for 6–8 hours before recalibration
- Do not calibrate flow or part weight with a spool that has been left exposed for an extended period
OEM / ODM Services
We support OEM / ODM programs for distributors, importers, private-label brands, RC hobby channels, education suppliers, and specialist filament retailers. Available project options include neutral packaging, custom labels, branded boxes, barcode and language localization, custom color matching with sample approval, carton marks, and private-label product-line development.
MOQ Reference: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.
Quality Control
- Diameter and ovality control for stable 1.75mm feeding
- Winding and spool-edge inspection to reduce crossovers and feed resistance
- Active-foaming sample print check for extrusion and surface consistency; buyers can repeat the same checks with our 3D Printer Filament Test Protocol
- Vacuum-seal and desiccant inclusion check before carton packing
- Color and matte-surface comparison against approved production reference
- Batch labeling, carton marking, and shipment preparation review with supporting Batch QC Data available for buyer review
Certifications
- RoHS – compliance documentation available for confirmed product
- SDS / MSDS – safety documentation available
- TDS – technical product documentation available
- CE – documentation available where applicable to the confirmed supply scope
- SGS testing / report support available on request
Frequently Asked Questions
What is the MOQ for this PLA-LW product?
Neutral packaging starts from 50 rolls. OEM packaging typically ranges from 500 to 1,000 rolls depending on label, box, spool, and color-customization scope.
What does “active foaming” mean for PLA-LW?
Active foaming means the filament expands inside the hotend as printing temperature rises. You then reduce and calibrate flow to reach the target wall thickness, part density, and weight. This gives more control than a fixed-density pre-foamed filament.
How do I make the printed part lighter without losing control of wall thickness?
Start with a single-wall calibration part. Increase nozzle temperature inside the validated foaming window, measure actual wall thickness, then reduce flow in small steps until the printed wall and part mass reach your target. Repeat calibration when nozzle size, speed, or wall geometry changes.
Is this PLA-LW suitable for Bambu Lab, Prusa, Creality, Anycubic, and Elegoo printers?
Yes. It is designed for most open-material 1.75mm FDM printers that can hold the selected nozzle temperature steadily. Bambu Lab PLA Aero-style profiles are a useful machine reference, while other printer brands should start conservatively and calibrate temperature and flow before lightweight production parts.
What are the best applications for matte pastel-blue PLA-LW?
RC aircraft, gliders, UAV concepts, cosplay shells, lightweight display models, educational aerodynamics, and large decorative parts are the strongest fit because lower mass and a soft matte surface both add practical value.
Can you provide OEM / private-label packaging and custom colors?
Yes. We support neutral packaging, custom labels, branded boxes, custom color matching with sample approval, localized packaging text, barcode programs, and project-based private-label development.
Are sample rolls available for qualification?
Qualified B2B buyers can apply for up to 3 sample rolls through our Free Filament Samples program after project review. For structured approval, use the SSSray Filament Qualification Program to confirm foaming response, print profile, color, surface finish, and packaging requirements before bulk production.
What documents and lead times are available for bulk orders?
RoHS, SDS / MSDS, TDS, CE documentation and SGS testing support can be provided according to the confirmed product and order requirement. Standard orders are 7–15 working days; OEM/custom orders are 15–25 working days.
Looking for a Reliable PLA-LW Filament Supplier?
Send us your target printer, nozzle size, wall thickness, model type, and target part weight. We can align sample evaluation, bulk pricing, OEM / ODM packaging, and export supply around the application you actually need to qualify.
Additional Information
| Color | Pastel Blue / Soft Matte Finish |
|---|---|
| Filament Diameter | 1.75mm standard; 2.85mm available on request |
| Spool Weight | 1kg Net Weight |
| Gross Weight | 1.3kg |
| Material | Active Foaming PLA-LW (Lightweight PLA) |
| Packaging | Vacuum sealed with desiccant |
| Spool Type | Plastic spool |
| Standard Tolerance | ±0.03mm |
| Brand | SSSray |
| Product Series | Lightweight / Foaming PLA Series |
Packaging Gallery
Our Protection Measures
- Vacuum-sealed bag packaging to protect moisture-sensitive print consistency
- Desiccant included in each unit for storage and export transit
- Individual retail box and private-label box support available
- Export carton packing configured for wholesale and OEM orders
- Shipment-ready carton marking, pallet planning, and loading support
Carton Reference
| Packing Reference | Typical Description |
|---|---|
| Inner Unit | 1 roll / box |
| Master Carton Quantity | Based on order arrangement and packaging format |
| Carton Type | Export standard carton |
| Carton Dimensions | May vary depending on spool style and box format |
| Palletization | Available upon shipment planning |
| Labeling | Neutral / custom OEM labels available |
Carton dimensions and packing quantity may vary depending on packaging style, spool type, and customization requirements.
B2B Supply Terms
| MOQ | Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls |
|---|---|
| Available Colors | Standard colors plus custom color matching with sample approval |
| Diameter Options | 1.75mm standard; 2.85mm available on request |
| Spool Design | Standard plastic spool or customized spool options |
| Sample Orders | Qualified buyers may receive up to 3 free sample rolls after project review |
| Payment Methods | T/T for all orders; PayPal for small trial orders |
| L/C Terms | Considered only for selected large-volume existing customers after evaluation |
| Trade Terms | FOB Ningbo / EXW |
| Standard Payment Terms | 30% deposit, 70% balance before shipment |
| Lead Time | Standard orders 7–15 working days; OEM/custom orders 15–25 working days |
| Port of Loading | Ningbo, China |
| OEM / ODM | Supported |



