Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

Plaster White Matte PLA Filament 1.75mm by SSSray – 3D Printer Filament for Landmark Replicas & Classical Detail Models, filamen PLA matte putih
Factory-produced high-speed matte PLA for landmark replicas, classical relief models and detail-rich architectural displays.
Our Plaster White is a bright, neutral and fully opaque white with a dry-gypsum appearance. Its soft matte finish keeps glare low so stepped edges, fluted columns, Corinthian capitals and coffered arches remain clear while the high-speed PLA grade supports faster FDM production.
MOQ: Neutral packaging from 50 spools; OEM packaging typically 500–1,000 rolls.
Lead Time: Standard 7–15 working days; customized orders 15–25 working days.
Factory: Jinhua, Zhejiang, China | Port: Ningbo, China | High-Flow Tuning: Up to 250mm/s on capable systems after flow and cooling calibration.
Product Overview
SSSray Plaster White Matte PLA is a 1.75mm high-speed matte PLA filament for architectural replicas, classical relief models and presentation pieces. We developed this SKU around a bright, neutral, fully opaque white with a dry-gypsum appearance and a soft matte surface. The finish keeps reflected highlights subdued, allowing stepped profiles, stair lines, fluted columns, Corinthian capitals and coffered arches to remain visually clear under studio or exhibition lighting.
For FDM/FFF production, use 100–250mm/s as the working speed range. Start at 190–210°C for 50–150mm/s and 210–230°C for 150–250mm/s, then fine-tune according to hotend flow, cooling and part geometry. Each standard spool carries 1kg net filament, 1.75mm diameter and ±0.03mm tolerance, packed in a vacuum-sealed bag with desiccant. SSSray manufactures and supplies this grade from Jinhua, Zhejiang, China, with neutral packaging from 50 spools, OEM programs typically from 500–1,000 rolls, and standard production lead time of 7–15 working days. FOB Ningbo and EXW are available.
Why This Product Stands Out
Plaster White is made for prints that should look like architectural study models cast in gypsum—not glossy plastic. Its bright neutral tone stays fully opaque, while the soft matte surface keeps reflections from washing out shallow relief, stair edges and classical profiles. There is no pearl, silk, translucent or marble effect competing with the geometry. The same SKU supports FDM workflows at 100–250mm/s on suitable high-speed machines, subject to hotend flow, cooling and model geometry. That combination gives distributors a clearly defined white-matte product for landmark replicas, heritage displays, architecture studios and premium presentation models.
Product Benefits & Factory Performance
Plaster White Architectural Tone
Bright, neutral and fully opaque for landmark replicas, classical architecture and clean presentation models.
Low-Glare Matte Surface
Soft matte appearance keeps reflected highlights from distracting from fine relief and architectural profiles.
High-Speed Production
Supports 100–250mm/s production printing on suitable FDM systems, subject to hotend flow, maximum volumetric speed, cooling, acceleration and model geometry.
Controlled 1.75mm Feeding
1.75mm nominal diameter with ±0.03mm tolerance for consistent feeding across open-material FDM platforms.
Factory Batch Control
Inline laser monitoring, spool traceability and batch COA support for repeat wholesale and print-farm orders.
Direct OEM / Private Label
Neutral supply from 50 spools and OEM packaging programs typically from 500–1,000 rolls.
Factory Performance and Quality Controls
| Characteristic | SSSray Product / Factory Control | Production Reference |
|---|---|---|
| Nominal Diameter | 1.75mm | Standard open-material 1.75mm FDM/FFF filament format. |
| Diameter Tolerance | ±0.03mm | Inline dual-axis laser monitoring; PLA / PLA+ / High-Speed PLA family ovality benchmark ≤0.020mm. |
| High-Speed Printing | 100–250mm/s production range | High-flow profiles can be tuned up to 250mm/s on capable systems; sampled high-speed PLA spools undergo continuous print-farm validation at speeds up to 250mm/s. |
| Moisture Management | Vacuum-sealed bag with desiccant | Factory post-drying moisture target below 0.02% for the PLA / PLA+ / High-Speed PLA family before sealing. |
| Colour and Opacity | Bright neutral Plaster White; fully opaque | Production lots are checked against the approved colour reference; PLA-family colour-control benchmark ΔE < 0.8. |
| Surface Finish | Soft matte, low-glare; no pearl, silk, translucent or marble effect | Designed for architectural relief, stair edges, fluting and presentation surfaces. |
| Material Behaviour | Rigid PLA-based thermoplastic with low-warp handling under suitable setup | Use for models and display pieces; choose a material with a suitable heat and load rating for demanding service conditions. |
| Batch Traceability | Spool-level laser serialization and batch COA | Batch ID links spool identification, order records and quality documentation. |
Commercial Value for B2B Buyers
Plaster White gives your range a specialist architectural-white SKU with a clear reason to buy: a dry-plaster visual character, low-glare matte finish and high-speed PLA workflow in one familiar 1kg format. Model studios and education buyers can use it for stepped monuments, classical columns, relief panels and presentation maquettes; print farms can use the high-speed grade to shorten production cycles on machines with sufficient melt flow and cooling. For distributors, the 50-spool neutral-packaging MOQ creates a practical entry point before scaling to 500–1,000-roll OEM packaging programs. SSSray manufactures in Jinhua, Zhejiang, and supports batch control, vacuum packaging, export cartons and FOB Ningbo / EXW supply.
Build your matte assortment through our PLA Matte filament range, expand volume through wholesale PLA supply, or discuss a high-speed filament program and custom PLA production for your market.
How We Work
Material Comparison Guide
| Material | Surface Appearance | Typical Printing Conditions | Material Behaviour | Typical Applications |
|---|---|---|---|---|
| Plaster White High-Speed Matte PLA | Bright, neutral and fully opaque white; soft matte, low-glare finish | 190–210°C at 50–150mm/s; 210–230°C at 150–250mm/s; production speed up to 250mm/s on suitable systems | Rigid PLA-based thermoplastic with low-warp handling under suitable bed adhesion; limited heat resistance compared with engineering polymers | Landmark replicas, classical reliefs, architectural maquettes and presentation models |
| Standard PLA | Surface sheen varies with pigment and formulation | Conventional PLA temperature and speed profile; cooling commonly enabled | Rigid and easy to process; heat and impact behaviour depend on grade | General models, education, figures and everyday prototypes |
| PLA+ / PLA Pro | Appearance varies by formulation and colour | Usually close to PLA; follow the grade-specific profile and flow limit | Modified PLA blend; toughness, impact resistance and stiffness vary by formulation | General-purpose prototypes and parts requiring a modified PLA blend |
| PETG | Often higher sheen or translucency, depending on colour and grade | Typically higher nozzle temperature than PLA; moderate cooling and tuned retraction | More ductile than many PLA grades; stringing and bed adhesion require profile control | Functional covers, brackets, containers and parts needing greater ductility |
| ABS / ASA | Usually satin or matte, depending on grade | Higher nozzle and bed temperatures; enclosure and warping control commonly used | Higher service-temperature capability than ordinary PLA; ABS/ASA differ in UV resistance | Engineering housings, functional components and outdoor-exposed ASA parts |
Technical Specifications
| Product Name | Plaster White Matte PLA Filament 1.75mm by SSSray – 3D Printer Filament for Landmark Replicas & Classical Detail Models, filamen PLA matte putih |
|---|---|
| Brand | SSSray |
| Product Series | SSSray PLA Matte Series – Clean Whites for Replicas & Presentation Pieces |
| Material | PLA Matte – high-speed printing grade |
| Printing Process | FDM / FFF 3D printing |
| Color | Plaster White; bright, neutral and fully opaque |
| Surface Effect | Soft matte; no gloss, pearl, silk, translucent or marble effect |
| Filament Diameter | 1.75mm standard for this SKU |
| Other Diameter Option | 2.85mm for selected products or by project confirmation |
| Diameter Tolerance | ±0.03mm |
| Net Filament Weight | 1kg per spool |
| Gross Weight | 1.3kg per packed roll |
| Spool Type | Plastic spool |
| Packaging | Vacuum-sealed bag with desiccant |
| Recommended Production Speed | 100–250mm/s |
| Advanced High-Flow Capability | Up to 250mm/s on capable systems with matched hotend flow, cooling and slicer settings |
| Printer Compatibility | Most open-material 1.75mm FDM/FFF printers with suitable high-speed capability and spool clearance |
| Typical Applications | Landmark replicas, architectural maquettes, classical details, relief models, display pieces and education models |
| Factory Location | Jinhua, Zhejiang, China |
| Port of Loading | Ningbo, China |
| Neutral-Packaging MOQ | 50 spools |
| OEM Packaging MOQ | Typically 500–1,000 rolls |
| Lead Time | Standard 7–15 working days; customized orders 15–25 working days |
| Trade Terms | FOB Ningbo / EXW |
| OEM / ODM | Supported: labels, retail boxes, barcodes, carton marks, spool options and private-label programs |
| Technical Documents | PLA Matte TDS, SDS / MSDS and applicable RoHS supporting documentation available through the SSSray Technical Documents Center |
Recommended Print Settings
| Parameter | Recommended Starting Value | Usable / Adjustment Range |
|---|---|---|
| Nozzle Temperature by Speed | 190–210°C at 50–150mm/s; 210–230°C at 150–250mm/s | Fine-tune within the applicable temperature range according to hotend flow, cooling and surface finish; keep print speed at or below 250mm/s |
| Heated Bed Temperature | 50–55°C starting point | 45–60°C according to build plate and model footprint |
| Production Print Speed | 100–250mm/s | 50–250mm/s after flow and cooling calibration |
| Advanced High-Flow Speed | Up to 250mm/s on capable systems | Match hotend flow, maximum volumetric speed, cooling, acceleration and geometry before raising speed |
| Outer-Wall Speed for Relief | 60–120mm/s | Reduce for small capitals, flutes, stair edges and shallow relief |
| Retraction – Direct Drive | 0.8–1.5mm at 30–40mm/s | Tune to hotend, nozzle temperature and travel behaviour |
| Retraction – Bowden | 3–5mm at 30–45mm/s | Adjust to Bowden path length and extruder design |
| Layer Height | 0.16–0.24mm for production | 0.12–0.28mm; use 0.12–0.16mm for fine architectural relief |
| Cooling Fan | 80–100% after the first 2–3 layers | Use strong cooling for high-speed walls, bridges and small features |
| Wall Count | 3 perimeters | 2–4 perimeters; use 3–4 for architectural display pieces |
| Infill | 15–20% for display models | 40–60% for heavier models; select infill by geometry and intended use |
| First-Layer Speed | 20–30mm/s | Reduce for narrow bases, tall replicas and large flat footprints |
| Bed Adhesion | Clean PEI smooth, satin or textured plate | Glass with a suitable adhesive layer; follow the build-plate maker’s surface guidance |
| Baseline Nozzle | 0.4mm nozzle | Use 0.2mm for fine relief or 0.6mm for larger high-throughput models with a tuned profile |
| Maximum Volumetric Flow | Calibrate in the slicer before high-speed production | Set to the measured hotend/material limit; print speed alone does not define extrusion capacity |
Print Optimization Guide
| Print Objective | SSSray Setup Guidance |
|---|---|
| Maintain high-speed throughput | Start at 100–250mm/s, calibrate maximum volumetric flow, then raise speed only while extrusion remains continuous and layer bonding stays consistent. Do not exceed 250mm/s for this product profile. |
| Show fine architectural relief | Use a 0.12–0.16mm layer height, 60–120mm/s outer walls and a clean 0.4mm nozzle for capitals, flutes and recessed lines. |
| Keep the white surface even | Hold nozzle temperature and cooling steady; use a consistent outer-wall path and avoid abrupt speed changes on visible surfaces. |
| Reduce stringing at speed | Run a retraction test, check nozzle cleanliness and adjust temperature in small steps while monitoring extrusion continuity. |
| Secure large architectural bases | Clean and level the build plate, use a 20–30mm/s first layer and add a brim for narrow footprints or tall models. |
| Control corners and long edges | Keep cooling consistent and moderate acceleration on thin features; use slower outer walls where crisp geometry matters most. |
| Protect the spool between runs | Reseal opened filament with desiccant and store it in a dry box; check the spool condition before long production runs. |
| Repeat a qualified production profile | Record printer, nozzle, temperature, volumetric flow, cooling and material lot, then keep the approved profile consistent across the batch. |
Printer Brand Starting Settings
| Printer Platform | Nozzle Starting Point | Bed Starting Point | High-Speed Initial Range | SSSray Setup Focus |
|---|---|---|---|---|
| Bambu Lab high-speed models | 210–230°C | 45–55°C | 150–250mm/s | Calibrate max volumetric speed; keep outer walls around 60–120mm/s for relief detail. |
| Prusa high-speed models | 190–210°C at 100–150mm/s; 210–230°C at 150–200mm/s | 50–60°C | 100–200mm/s | Use input shaping and the machine’s material-flow limit; tune cooling for bridges and small features. |
| Creality K1 / high-speed platforms | 210–230°C | 50–60°C | 150–250mm/s | Start with a high-speed PLA profile and calibrate flow, retraction and part cooling. |
| Anycubic high-speed platforms | 210–230°C | 50–60°C | 150–250mm/s | Verify maximum volumetric flow, first-layer offset and cooling before batch printing. |
| Flashforge high-speed platforms | 210–230°C | 50–60°C | 150–250mm/s | Use a high-speed PLA profile where supported; check spool clearance and extrusion path. |
These are SSSray starting ranges for high-speed-capable printer models. Actual throughput is governed by hotend flow, volumetric limits, acceleration, cooling, nozzle size and model geometry.
Applications
| Application Focus | Practical Notes |
|---|---|
| Landmark and Monument Replicas | Plaster White gives stepped pyramids, monuments, gates and landmark maquettes a clean cast-plaster appearance. |
| Classical Architecture Details | Use fine layers and controlled outer walls to present Corinthian capitals, fluted columns, cornices, arch coffers and mouldings. |
| Museum and Heritage Displays | The neutral opaque white keeps attention on form, relief and architectural proportions in exhibition models. |
| Architecture and Education Studios | Suitable for scale studies, building components, teaching models and design-review prototypes. |
| Miniatures and Exhibition Models | The low-glare matte surface helps small architectural scenes and display pieces read clearly under gallery lighting. |
| Sculptures and Relief Panels | Opaque white provides a consistent surface for sculptural forms, embossed patterns and decorative relief panels. |
| Print-Farm Presentation Runs | High-speed production profiles help batch-produce display models and repeat architectural components on capable FDM systems. |
Storage Guide
- Keep each spool in its original vacuum-sealed bag until it is ready for printing.
- After opening, return the filament to a sealed bag or dry storage box with fresh desiccant.
- Store in a cool, dry area away from direct sunlight, heaters and other heat sources.
- Limit prolonged exposure to humid room air between production runs.
- Before a long print-farm run, check the filament path and print a short reference part if the spool has been stored open.
OEM / ODM Services
SSSray manufactures Plaster White Matte PLA for distributors, importers, wholesalers, retail brands and project buyers building a dedicated architectural-white or high-speed matte product line. Our factory-side OEM / ODM coordination covers private-label spool labels, branded retail boxes, barcode and carton-mark artwork, neutral packaging, order-specific packing configurations and product-line planning.
For larger programs, we can coordinate approved spool formats, packaging components and colour development around your target market. Neutral packaging starts from 50 spools; OEM packaging is typically arranged at 500–1,000 rolls. Our team aligns artwork, packaging specifications, production scheduling and batch QC before shipment. Explore our private-label filament service and OEM / ODM manufacturing program.
Quality Control
- Inline diameter monitoring: dual-axis laser micrometers monitor filament diameter against the ±0.03mm specification during extrusion; out-of-spec segments are cut and purged.
- Ovality control: the PLA / PLA+ / High-Speed PLA family benchmark is ≤0.020mm, supporting roundness and consistent feeding.
- Moisture verification: Karl Fischer moisture titration checks post-drying material before vacuum sealing, with a factory target below 0.02% for the PLA family.
- White-shade consistency: spectrophotometer checks compare production lots with the approved colour reference; the PLA-family colour-control benchmark is ΔE < 0.8.
- High-speed print validation: sampled high-speed PLA spools undergo continuous 24-hour print-farm testing on Bambu Lab, Creality and Voron platforms at speeds up to 250mm/s.
- Batch and shipment traceability: spool-level laser serialization, batch COA, net/gross weight, winding, vacuum seal, desiccant, labels and carton marks are checked through order preparation.
SSSray operates 50+ high-speed extrusion lines in Zhejiang and applies more than 70 quality checkpoints per spool across its high-speed filament program. For wholesale and OEM orders, buyers can request the batch COA and the quality records associated with the confirmed production lot. Review our factory batch QC and COA program.
Compliance and Technical Documents
| Document | Availability and Use |
|---|---|
| RoHS Supporting Documentation | Available for procurement and destination-market compliance review. Match the document to the ordered material and SKU. |
| Technical Data Sheet (TDS) | PLA Matte technical data sheet is available through the SSSray Technical Documents Center. |
| Safety Data Sheet (SDS / MSDS) | PLA Matte safety data sheet is available through the SSSray Technical Documents Center. |
| Batch Certificate of Analysis (COA) | Batch-level COA and spool traceability records support wholesale and OEM order verification. |
Open the SSSray Technical Documents Center to locate the current PLA Matte files. For a purchase order, our team aligns the document set with the material, formulation and destination-market requirements.
Frequently Asked Questions
What makes Plaster White Matte PLA different from ordinary white PLA?
Plaster White is a bright, neutral and fully opaque white with a dry-gypsum appearance and a soft matte finish. It has no pearl, silk, translucent or marble effect, so the printed surface keeps the focus on architectural form and relief.
Which applications are best suited to this high-speed matte white filament?
We supply this grade for landmark replicas, classical capitals, fluted columns, coffered arches, relief panels, museum displays, architecture studios, education models and presentation maquettes.
What printing speed can this Plaster White PLA support?
Use 100–250mm/s as the high-speed production range. On suitable high-flow printers, tune toward the 250mm/s upper limit only after checking hotend flow, maximum volumetric speed, cooling, acceleration and model geometry.
Which nozzle and bed temperatures should I use?
For 50–150mm/s, start at 190–210°C; for 150–250mm/s, start at 210–230°C. Start with a 50–55°C bed and adjust within the stated 45–60°C range according to the build plate and model footprint.
Is this 1.75mm filament compatible with Bambu Lab, Prusa and Creality printers?
It is designed for open-material 1.75mm FDM/FFF printers, including high-speed models from Bambu Lab, Prusa, Creality, Anycubic and Flashforge. Select a high-speed PLA profile and match the slicer flow limit to the printer’s hotend capacity.
What is the MOQ for Plaster White Matte PLA?
Neutral packaging starts from 50 spools. OEM packaging programs are typically arranged at 500–1,000 rolls, depending on the approved labels, retail box and carton configuration.
Can SSSray provide samples and private-label packaging?
Approved B2B qualification projects can receive up to 3 complimentary sample rolls after review. We support private-label spool labels, branded boxes, barcodes, carton marks and OEM / ODM packaging programs.
What are the production lead time and shipping terms?
Standard orders are scheduled for 7–15 working days; customized orders are typically 15–25 working days. SSSray manufactures in Jinhua, Zhejiang, China. Trade terms are FOB Ningbo or EXW, with Ningbo, China as the port of loading for FOB shipments.
Bring Plaster White High-Speed Matte PLA into Your Product Line
Send SSSray your target quantity, destination market, printer platform and packaging requirements. Our factory team will coordinate the Plaster White specification, sample evaluation, high-speed profile, OEM packaging and shipment plan for your wholesale or private-label program.



