Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

SSSray Silk Dual-Color PLA, Red-Gold – 1.75mm Bicolor 3D Printer Filament (Sợi PLA Silk 2 Màu) for Chess Pieces & Sculpted Figurines
Red-Gold Dual-Color Silk PLA for Chess Sets, Sculpted Figurines and Decorative FDM Prints.
One filament strand carries scarlet red and honey gold together. The two colors reveal themselves across different faces and viewing angles, giving twisted chess-piece details and faceted figurines a distinctive silk finish without a spool-length gradient.
MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.
Lead Time: Standard orders 7–15 days; customized orders 15–25 days.
Product Overview
SSSray Silk Dual-Color PLA, Red-Gold is a 1.75mm FDM/FFF filament built around a distinctive scarlet-red and honey-gold silk finish. Both colors run together in one strand and reveal themselves differently across the geometry of a printed object: a queen chess piece can show alternating red-and-gold spiral bands along its twisted body and crown, while the angled faces of a low-poly cat tend to read predominantly red or gold depending on face orientation and light. The effect is not a lengthwise gradient, metallic coating, or transparent finish. The glossy surface gives chess sets, tabletop miniatures, sculpted figurines, collectible models and display pieces a ready-to-display look without post-print painting. We supply this SKU with 1.75mm diameter, ±0.03mm diameter tolerance, 1kg net filament weight, vacuum-sealed packaging with desiccant and export-oriented B2B support. Neutral bulk orders start from 50 rolls, while OEM packaging programs typically run from 500–1,000 rolls. Qualified buyers can also request sample evaluation before volume ordering.
For broader sourcing programs, explore our wholesale PLA filament supply and custom PLA filament options.
Why the Red-Gold Effect Works on Sculpted Geometry
Scarlet red and honey gold are built into the same filament strand, so a single-extruder printer can produce a two-color visual result without loading two separate materials. On a turned chess queen, the spiral body and crown pick up alternating red and gold bands. On a low-poly figurine, individual planes tend to present one dominant color at a time. Both tones carry a pronounced silk sheen; highlights can make the red lean slightly orange. This is a face-and-angle effect—not a rainbow gradient that changes as the spool unwinds, and not a metallic or transparent material.
Key Selling Points
Two Colors in One Strand
Scarlet red and honey gold print through a single 1.75mm filament path—no dual-extruder color change is needed for this effect.
Facet-by-Facet Contrast
Different faces and viewing angles bring forward red or gold, giving low-poly cats, chess pieces and angular sculptures visual separation.
Silk Surface Sheen
The glossy finish catches light across curves, raised details and faceted planes, helping display models look finished straight off the printer.
Familiar PLA Workflow
Designed for common 1.75mm FDM/FFF systems using a standard PLA-style setup, with slower outer walls for a more even silk appearance.
Retail-Ready 1kg SKU
A standard 1kg plastic-spool format gives distributors a straightforward decorative PLA item to add to tabletop, craft and gift ranges.
Wholesale & Private Label
Neutral bulk supply starts at 50 rolls; OEM packaging programs run from 500–1,000 rolls after artwork and packing approval.
Key Product Features
| Feature | Practical Buyer Benefit |
|---|---|
| Scarlet Red & Honey Gold in One Strand | Creates a recognizable two-tone decorative SKU without requiring two separately loaded colors. |
| Face- and Angle-Dependent Color Display | Brings red or gold forward on different planes, making sculpted geometry and turned details easier to distinguish visually. |
| Silk Gloss on Both Colors | Provides a reflective surface finish for chess sets, figurines and display pieces. |
| 1.75mm Filament / ±0.03mm Diameter Tolerance | Matches the common 1.75mm FDM format and this SKU’s ±0.03mm diameter tolerance. |
| 1kg Plastic Spool | Fits a familiar retail and wholesale pack format for filament resellers. |
| Vacuum-Sealed Bag with Desiccant | Helps protect the filament from moisture exposure during storage and transport. |
| Neutral MOQ 50 / OEM MOQ 500–1,000 | Supports both initial wholesale orders and larger private-label programs. |
Commercial Value for Distributors and Retail Brands
We supply this red-gold Silk PLA as a visually differentiated wholesale SKU for chess sets, tabletop collectibles, sculpted animals and decorative giftware. One spool creates the two-tone silk effect on a familiar single-extruder workflow, giving retailers a stronger product story than a generic “silk PLA” listing. For print farms, model geometry creates the red-gold contrast without adding a second material feed. For wholesalers, the 1kg spool and 50-roll neutral MOQ make it practical to test demand quickly, while 500–1,000-roll OEM packaging programs support branded range expansion.
How We Work with B2B Buyers
Material Comparison Guide
| Material | Visual / Surface Character | Typical Printing Conditions | Typical Use | Material Difference |
|---|---|---|---|---|
| SSSray Red-Gold Silk PLA | Two-tone scarlet red and honey gold in one strand; silk sheen; face-dependent color display. | PLA-range nozzle and bed temperatures; high part cooling; slower outer walls for gloss. | Chess pieces, figurines, low-poly models, display décor and giftware. | Built for visual contrast and display-quality finish; for structural or high-load parts, select the appropriate engineering filament family. |
| Standard PLA | Usually a single, uniform color with matte, satin or standard gloss depending on grade. | Low-temperature FDM workflow; commonly uses active part cooling. | General models, prototypes, classroom prints and everyday decorative parts. | More straightforward single-color appearance; does not provide the red-gold two-tone effect. |
| PLA+ / PLA Pro | Appearance varies by formulation and finish; often sold for general-purpose use. | Usually similar to or slightly warmer than standard PLA; profile depends on grade. | General models and parts where a modified PLA formulation is preferred. | Mechanical behavior varies by grade; use the selected PLA+ / PLA Pro specification for final part requirements. |
| PETG | Often glossy or semi-gloss; clear grades are available. | Typically higher nozzle and bed temperatures than PLA, with more controlled cooling. | Functional housings, brackets and parts needing greater heat or impact tolerance than standard PLA. | Different thermal and moisture behavior; not a direct visual substitute for Silk PLA. |
| ABS / ASA | Usually matte to satin depending on grade and finish. | Higher-temperature printing; enclosure and controlled cooling are commonly used. | Engineering parts; ASA is commonly selected for outdoor exposure when properly qualified. | Higher-temperature material family with a different printer and ventilation requirement. |
Technical Specifications
| Product Name | SSSray Silk Dual-Color PLA, Red-Gold – 1.75mm Bicolor 3D Printer Filament (Sợi PLA Silk 2 Màu) for Chess Pieces & Sculpted Figurines |
|---|---|
| Material | PLA (Polylactic Acid), silk-finish multi-color PLA |
| Product Series | SSSray PLA Multi-Color Series – Silk Dual-Color Line for Tabletop Pieces & Sculpted Figurines |
| Color | Scarlet Red & Honey Gold Bicolor Silk; red may lean slightly orange in highlights |
| Color Distribution | Both colors are present in one strand and appear across different faces and viewing angles; not a lengthwise gradient |
| Surface Appearance | Silk sheen on both colors; non-metallic and non-transparent |
| Filament Diameter | 1.75mm standard |
| Diameter Tolerance | ±0.03mm |
| Diameter Alternatives | 2.85mm available on request for selected projects |
| Net Weight | 1kg |
| Gross Weight | 1.3kg per retail unit |
| Spool Type | Plastic spool |
| Packaging | Vacuum-sealed bag with desiccant |
| Printer Compatibility | Most open-material 1.75mm FDM/FFF printers, including Bambu Lab P1 / X1, Prusa, Creality, Flashforge, Anycubic and Elegoo systems. Bambu Lab A-series printers are not recommended for this dual-color filament because filament rotation can cause uneven color transitions; confirm spool fit and profile on the target machine |
| Recommended Nozzle | 0.4mm recommended |
| Typical Applications | Chess pieces, chess sets, sculpted figurines, low-poly animals, tabletop collectibles, display models and decorative giftware |
| OEM / ODM | Supported: custom labels, retail boxes, language labeling and private-label packaging |
| Technical Documents | Current TDS / SDS and applicable compliance documents are supplied for project and destination-market review |
Recommended Print Settings
| Parameter | SSSray Recommended Range | Performance Range / Tuning |
|---|---|---|
| Nozzle Diameter | 0.4mm nozzle | Best starting size for balanced detail, flow and silk surface quality |
| Nozzle Temperature | 210–230°C | 190–240°C usable after tuning; raise temperature when higher flow or stronger silk sheen is required |
| Bed Temperature | 50–60°C | 45–60°C depending on build plate and first-layer adhesion |
| Print Speed | 40–100 mm/s | 40–200 mm/s after flow and temperature calibration on capable printers |
| Outer-Wall Speed | 30–50 mm/s | Keep visible outer walls controlled to maximize gloss and red-gold color separation |
| Retraction – Direct Drive | 0.5–1.2mm at 30–40mm/s | Fine-tune for stringing, travel length and hotend behavior |
| Retraction – Bowden | 2.5–5.0mm at 25–40mm/s | Use the shorter end first, then increase only as required for the filament path |
| Layer Height | 0.16–0.20mm for general models | 0.12–0.28mm; use 0.12–0.16mm for crown details and small sculpted features |
| Part Cooling Fan | 80–100% after the first 2–3 layers | 50–100% for model-dependent tuning; use 0–30% on the first layer |
| Wall Count | 3 perimeters | 2–4 perimeters; use 3–4 for larger display pieces |
| Infill | 15–20% for decorative models | 25–40% for larger or denser display pieces |
| First-Layer Speed | 20–30 mm/s | Use a controlled first layer before increasing overall speed |
| Bed Adhesion | PEI or clean glass build surface | Use a compatible adhesive when the selected build plate requires it |
| Drying (if moisture symptoms appear) | 50°C for 6 hours | Dry in a filament dryer, then reseal with desiccant |
For repeat production, keep the approved temperature, flow, retraction and outer-wall profile consistent across the same printer and model family.
Print Optimization Guide
| Print Objective | Practical Guidance |
|---|---|
| Show the Red-Gold Contrast | Use models with twisted, curved or faceted geometry. The queen’s spiral body and crown can show alternating bands; each low-poly cat face may read mainly red or mainly gold. |
| Choose the Dominant Face Color | Rotate the model on the build plate and inspect a short sample print. Face orientation and viewing angle affect which color is most visible on each plane. |
| Preserve Silk Sheen | Keep visible outer walls around 30–50mm/s to preserve a smoother silk sheen and stronger red-gold separation while internal moves run faster. |
| Retain Small Details | Use 0.12–0.16mm layers for fine crown points, chess-piece profiles and small sculpted features; 0.20mm is a practical general setting. |
| Control Overhangs | Use adequate part cooling and reduce speed on steep overhangs or short layers to limit sagging and preserve edge definition. |
| Secure the First Layer | Clean the build plate, start at 50–60°C bed temperature and use a slower first layer before adjusting the profile for speed. |
| Manage Moisture | Keep the spool sealed with desiccant. If popping, stringing or surface voids appear after humid storage, dry at 50°C for about 6 hours and re-test. |
Printer Brand Starting Settings
| Printer Ecosystem | Nozzle | Bed | SSSray Starting Speed | Setup Note |
|---|---|---|---|---|
| Bambu Lab P1 / X1 families | 210–230°C | 50–60°C | 60–120 mm/s | Use a PLA / Silk base profile; keep visible outer walls around 30–50mm/s for a stronger silk finish. |
| Bambu Lab A1 / A1 mini | — | — | Not recommended | Bambu Lab advises against PLA Silk Dual-Color on A-series printers because filament rotation can cause uneven color transitions. |
| Prusa MK4 / MK4S / CORE One | 210–225°C | 55–60°C | 40–80 mm/s | Use a PLA baseline with strong part cooling and controlled outer walls for clean sculpted details. |
| Creality Ender Series | 200–220°C | 50–60°C | 40–80 mm/s | Use a 0.4mm nozzle, tune retraction for the extruder path and keep the first layer controlled. |
| Creality K1 / K1C Series | 210–230°C | 50–60°C | 60–120 mm/s | Use the higher-flow capability for internal moves while keeping outer walls around 30–50mm/s for gloss. |
| Flashforge Adventurer / AD series | 210–230°C | 50–60°C | 60–120 mm/s | Use a 0.4mm nozzle and balance cooling with slower visible outer walls for the red-gold silk effect. |
| Anycubic / Elegoo 1.75mm FDM systems | 210–230°C | 50–60°C | 40–100 mm/s | Start from a PLA profile and tune flow, retraction and first-layer adhesion for the exact machine. |
These SSSray starting profiles prioritize both throughput and silk appearance. Increase speed after flow calibration while keeping visible outer walls around 30–50mm/s.
Performance Characteristics
| Characteristic | Product Specification / Behavior | Practical Notes |
|---|---|---|
| Color Architecture | Scarlet red and honey gold in one filament strand | Printed color distribution changes across faces and angles; it is not a lengthwise spool gradient. |
| Surface Appearance | Silk sheen on both colors | Slow outer walls to bring out reflective highlights on curves and facets. |
| Color Tone | Warm scarlet red and honey-yellow gold | Highlights can make the red appear slightly orange; not metallic and not transparent. |
| Diameter | 1.75mm nominal / ±0.03mm diameter tolerance | Use a clean, correctly sized nozzle and verify feeding on the target printer. |
| Material Family | PLA-based Silk PLA | Optimized for decorative and display products; use an engineering-grade material for high-temperature, load-bearing or impact-critical parts. |
| Mechanical / Thermal Data | Available through the current SKU technical document set | For demanding designs, use the final part orientation and layer-bonding requirement during sample evaluation. |
| Warping Behavior | PLA-family behavior | PLA is generally less prone to significant warping than ABS/ASA; large bases still need a clean plate and a stable first layer. |
Applications
| Application Focus | Practical Notes |
|---|---|
| Chess Pieces & Complete Chess Sets | Turned profiles, spiral shafts and crowns can display alternating red-and-gold bands for a coordinated tabletop set. |
| Sculpted Figurines | Curved forms and raised details catch the silk sheen, helping display models stand out without a separate paint step for the color effect. |
| Low-Poly Animals & Geometric Models | Individual planes can appear predominantly red or gold, making faceted cats and angular sculptures a natural showcase for this color pairing. |
| Tabletop Miniatures & Collectibles | Suitable for display-oriented pieces, decorative tokens, busts and collectible accessories where appearance is the primary requirement. |
| Giftware & Retail Décor | Useful for seasonal gift ranges, desk ornaments, home display objects and creative retail collections. |
| Education & Maker Workshops | Offers a straightforward way to demonstrate FDM layer formation, surface reflection and how geometry changes perceived color. |
Storage Guide
- Keep the spool vacuum-sealed until it is ready to be loaded into the printer.
- After opening, return unused filament to a sealed bag or dry box with fresh desiccant.
- Store away from direct sunlight, hot surfaces and prolonged high-humidity exposure.
- If moisture-related popping, stringing or surface voids appear, dry at 50°C for about 6 hours in a filament dryer, then reseal with desiccant.
- For repeat production, keep the approved sample storage and drying profile consistent across bulk runs.
OEM / ODM Services
We support distributors, wholesalers, importers and private-label brands building a decorative PLA range around a defined color identity. For this red-gold SKU, the discussion can cover neutral or branded packaging, product labels, carton marks, barcode placement, SKU naming, spool presentation and market-specific packing requirements. Before mass production, we recommend approving a physical sample under the target printer profile and signing off the red-gold appearance under normal retail lighting.
MOQ Reference: Neutral packaging starts at 50 rolls. OEM packaging is typically 500–1,000 rolls, depending on artwork, packaging configuration and the confirmed order scope.
Quality Control Checkpoints
- Material and color-batch identification: confirm the approved red-gold color reference and production batch before the run.
- Diameter checks: inspect the 1.75mm filament against the agreed ±0.03mm diameter tolerance and retain the agreed inspection record.
- Winding appearance: check spool winding, crossover, loose loops and visible handling damage.
- Color-effect sample review: print an agreed chess-piece or faceted reference model to review red-gold distribution and silk appearance.
- Packaging verification: check vacuum sealing, desiccant inclusion, label details and net-weight identification.
- Carton and shipment review: verify master-carton quantity, outer labels and shipping marks against the approved packing list.
Technical Documents & Compliance Support
We support distributor onboarding and import review with product documents matched to the current SKU and destination market. Send us your document checklist with the inquiry, and our sales team will prepare the current TDS, SDS/MSDS and any applicable compliance or third-party reports available for this red-gold Silk PLA.
- TDS: current technical specifications and recommended processing information for the applicable SKU revision.
- SDS / MSDS: safe-handling and transport information for purchasing, warehouse and logistics teams.
- RoHS / REACH / third-party reports: supplied when the current report applies to this formulation, color and destination-market requirement.
Frequently Asked Questions
Does the red-gold color change along the length of the spool?
No. Scarlet red and honey gold are combined in one strand. The colors appear differently across printed faces and viewing angles; this is not a gradient that changes from one end of the spool to the other.
Can I print this dual-color filament with a single-extruder printer?
Yes. The two-color effect is carried by one filament strand, so a standard 1.75mm single-extruder FDM/FFF printer can produce the effect without loading two separate colors. The visible result depends on the model geometry and strand orientation.
Which models show the red-gold effect most clearly?
Twisted chess pieces, queen crowns, low-poly animals, faceted sculptures and other models with curved or angled surfaces make the color contrast easier to see. The queen’s spiral body can show alternating bands, while individual cat faces may appear mainly red or mainly gold.
What print settings should I start with?
Start at 210–230°C nozzle temperature, 50–60°C bed temperature and 40–100mm/s overall speed. On capable high-flow printers, overall speed can be increased toward 200mm/s after flow calibration while visible outer walls stay around 30–50mm/s for a stronger silk finish.
Which printers are compatible with this filament?
It is intended for most open-material 1.75mm FDM/FFF printers, including Bambu Lab P1 / X1, Prusa, Creality, Flashforge, Anycubic and Elegoo systems. Bambu Lab advises against PLA Silk Dual-Color on A-series printers because filament rotation can cause uneven color transitions. Check spool clearance, extruder type and the machine’s supported temperature range before production printing.
Can qualified buyers request samples?
Qualified B2B buyers can request up to 3 complimentary sample spools for printer and market evaluation. Sample freight is paid by the buyer.
What are the MOQ, lead time and payment terms?
Neutral packaging starts at 50 rolls; OEM packaging is typically 500–1,000 rolls. Standard orders are 7–15 days and customized orders 15–25 days. Standard payment is 30% deposit and 70% before shipment; T/T is available for all orders and PayPal is supported for small trial orders.
Can you provide OEM packaging and SKU documents?
Yes. We support OEM/private-label packaging for qualifying order volumes. Send us your destination market and document checklist, and we will prepare the applicable TDS / SDS plus available compliance documents for review.
Bring Red-Gold Silk PLA into Your Next Product Range
Tell us your target market, expected volume and packaging requirements. We can discuss sample evaluation, neutral bulk supply and a private-label program for this scarlet-red and honey-gold dual-color filament.




