Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

SSSray Red & Gold Silk PLA Filament for Fluted Vases & Decorative Prints – 1.75mm (פילמנט PLA משי דו-צבעי)
Reflective red-and-gold Silk PLA for fluted vases, sculptural décor and premium display prints.
SSSray Red & Gold Silk PLA is made for decorative prints where a reflective Silk surface is the main visual feature. Its sheen brings clear highlights to curved walls, flutes and raised details, making the finish especially effective on vases, sculptural ornaments and display pieces. Supplied in 1.75mm diameter on a 1kg plastic spool, with a stated ±0.03mm tolerance and vacuum-sealed, desiccant-protected packaging. Factory-direct neutral orders start at 50 rolls, with OEM packaging programs from 500–1,000 rolls.
MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.
Lead Time: Standard orders 7–15 days; customized orders 15–25 days.
Product Overview
SSSray Red & Gold Silk PLA is a decorative filament built around its reflective Silk surface. The finish creates bright highlights on curved walls, flutes and raised details, making it a strong choice for fluted vases, ribbed vessels, sculptural ornaments and display pieces where surface appearance matters. The red-and-gold colorway gives finished models a warm visual identity, while the Silk sheen remains the defining product feature. Supplied in 1.75mm diameter with a stated ±0.03mm tolerance, each spool carries 1kg net filament and is packed in a vacuum-sealed bag with desiccant. SSSray supplies neutral-packaging orders from 50 rolls and supports OEM packaging programs from 500–1,000 rolls. Our factory team coordinates sample evaluation, private-label artwork and export packing for distributors, importers and retail brands. Use the recommended Silk PLA starting window and tune outer-wall speed to balance sheen, detail and layer bonding.
Designed for Models That Are Meant to Be Seen
The reflective Silk finish is most visible on curved profiles, raised ribs and smooth transitions. It gives decorative vases, sculptural ornaments and display pieces a bright surface that changes with the viewing angle. SSSray supplies this Red & Gold Silk PLA to distributors, importers and private-label brands looking for a decorative filament whose defining feature is surface sheen.
Key Selling Points
Reflective Silk Sheen
A bright silk surface gives decorative prints clear highlights across curves, ribs and raised details.
Silk Finish with Color Depth
The reflective surface gives the red-and-gold colorway added depth as light moves across curved printed surfaces.
Highlights on Fluted Forms
Ribbed vases, fluted vessels and curved walls show the silk sheen through changing surface angles.
Made for Display Pieces
Use the finish on openwork ornaments, woven lattice spheres, giftware and statement decorative models.
Familiar 1kg Spool Format
One-kilogram net spools and standard 1.75mm filament simplify assortment planning for retailers and distributors.
Factory-Direct OEM Supply
Start with 50 rolls in neutral packaging or plan a 500–1,000-roll OEM packaging program with SSSray.
Key Features
| Product Feature | Buyer Benefit |
|---|---|
| PLA Silk Surface Finish | Gives decorative models a reflective finish that helps curved and raised details catch light. |
| Opaque Lacquer Red & Warm Gold | Creates a coordinated warm colorway for display décor, giftware and seasonal collections. |
| 1.75mm Diameter / ±0.03mm Tolerance | Provides a defined purchasing specification for standard 1.75mm FDM / FFF systems. |
| 1kg Net Weight / 1.3kg Gross Weight | Supports familiar retail-unit planning and preliminary freight calculations. |
| Plastic Spool / Vacuum Bag / Desiccant | Uses a standard spool format with moisture-protective unit packaging for storage and transport. |
| 50-Roll Neutral MOQ / 500–1,000-Roll OEM MOQ | Gives distributors an entry route and private-label brands a defined scale-up path. |
| 7–15-Day Standard Lead Time | Helps buyers plan replenishment; customized orders are typically scheduled in 15–25 days. |
Commercial Value for Decorative Filament Buyers
Add a finish-led Silk PLA SKU to your range with a clear visual identity: lacquer red, warm gold and a reflective surface that suits decorative products. The 1kg spool format fits familiar filament retail and wholesale programs, while the 50-roll neutral-packaging MOQ gives distributors a practical first-order quantity. When the colorway and demand are established, SSSray can coordinate OEM labels, retail packaging and export cartons for 500–1,000-roll programs. Our team handles sample requests, packaging details and shipment terms directly with your purchasing team.
How We Handle Your B2B Order
Material Comparison Guide
| Material | Visual Profile | Typical Applications | Typical Print Conditions | Practical Difference |
|---|---|---|---|---|
| SSSray Red & Gold Silk PLA | Reflective Silk surface with a warm red-and-gold color appearance. | Fluted vases, ribbed vessels, sculptural ornaments and decorative display pieces. | PLA Silk starting window; controlled outer-wall speed helps bring out the surface sheen. | Chosen for its reflective Silk finish on decorative models. |
| Standard PLA | Usually a uniform matte, satin or gloss finish depending on grade. | Figures, prototypes, teaching models and everyday decorative parts. | Commonly lower-temperature printing with moderate cooling and a PLA bed profile. | Broad general-purpose choice; does not provide this product’s red-and-gold silk effect. |
| PLA+ / PLA Pro | Usually a solid-color finish; surface appearance varies by formulation. | General models and parts where a modified PLA formulation is preferred. | PLA-family settings; follow the exact grade’s nozzle and bed recommendations. | Formulations may prioritize toughness or process behavior rather than the reflective surface finish of Silk PLA. |
| PETG | Can be clear, translucent or opaque, with gloss varying by grade. | Brackets, holders, containers and practical parts needing more flexibility than PLA. | Typically higher nozzle and bed temperatures than PLA; tune cooling and stringing control. | Different thermal and moisture behavior; not a direct substitute for silk PLA décor. |
| ABS / ASA | Often matte or satin; ASA is commonly selected for outdoor color retention. | Functional enclosures and parts requiring higher heat performance; ASA for outdoor exposure. | Higher-temperature printing; an enclosure and controlled cooling are commonly used. | More demanding print environment and a different application focus from decorative PLA. |
Use each material’s own processing window and the target printer profile when setting final production conditions.
Technical Specifications
| Specification | Product Details |
|---|---|
| Product Name | SSSray Red & Gold Silk PLA Filament for Fluted Vases & Decorative Prints – 1.75mm (פילמנט PLA משי דו-צבעי) |
| Material | PLA Silk (Polylactic Acid) |
| Product Series | SSSray PLA Silk Series – Red & Gold Silk Finish |
| Color / Appearance | Lacquer red and warm gold with a reflective Silk sheen; the surface appearance changes with viewing angle and lighting. |
| Red Tone | Saturated lacquer red with a slight orange lean; deeper crimson appearance in shaded areas. |
| Gold Tone | Warm golden yellow with an amber lean; pale-gold highlights under direct light. |
| Filament Diameter | 1.75mm standard for this SKU |
| Diameter Tolerance | ±0.03mm stated product specification |
| Net Filament Weight | 1kg per spool |
| Gross Weight | 1.3kg per spool |
| Spool Type | Plastic spool |
| Packaging | Vacuum-sealed bag with desiccant |
| Printing Technology | FDM / FFF |
| Recommended Nozzle | 0.4mm as a common starting nozzle size |
| Printer Compatibility | For 1.75mm FDM / FFF printers configured for PLA. Confirm the exact model’s filament path, spool-holder clearance and hotend temperature range; for automatic feeders, check supported spool dimensions and filament restrictions. |
| Typical Applications | Fluted vases, ribbed vessels, sculptural ornaments, seasonal décor, giftware and decorative display models. |
| OEM / ODM | Supported for private-label packaging and qualified customization projects. |
Recommended Print Settings
| Parameter | Recommended Starting Value | Usable / Tuning Range |
|---|---|---|
| Nozzle Temperature | 210–230°C | 190–240°C; tune for the hotend, extrusion rate and surface finish. |
| Heated Bed | 50–60°C | 45–60°C; confirm adhesion on the selected build plate. |
| Overall Print Speed | 50–100mm/s for standard FDM systems | Up to 200mm/s on high-flow systems after volumetric-flow calibration and a sample print. |
| Outer-Wall Speed | 30–50mm/s for a more even silk sheen | Use 30–40mm/s where surface gloss is the priority; increase only after checking the finish. |
| Layer Height | 0.16–0.20mm | 0.12–0.30mm with a suitable nozzle and layer profile. |
| Cooling Fan | 80–100% after the first layers | 50–100%; adjust for bridges, overhangs and layer bonding. |
| Retraction – Direct Drive | 0.8–1.2mm at 30–40mm/s | Start from the printer’s PLA profile and fine-tune with a retraction test. |
| Retraction – Bowden | 2.5–5.0mm at 30–45mm/s | Use the printer’s Bowden PLA baseline and adjust in small increments. |
| Wall Count | 2–3 perimeters | Use 3–4 walls for larger display pieces or heavier bases. |
| Infill | 15–20% for decorative models | 30–50% for heavier display bases; set infill to the model’s actual use. |
| First-Layer Speed | 20–30mm/s | Reduce speed if the first layer does not bond evenly. |
| Build Plate / Adhesion | Clean PEI or a compatible FDM build surface | Glass may be used with a suitable adhesion / release aid where recommended by the plate and printer manufacturer. |
Start within this window, then tune temperature, flow and wall speed on the target printer. On high-flow machines, raise speed only after volumetric-flow calibration; keep visible outer walls slower when gloss is the priority.
Print Optimization Guide
| Optimization Item | Practical Guidance |
|---|---|
| Bring Out the Silk Sheen | Keep visible outer walls around 30–50mm/s and avoid abrupt speed changes across the same surface. |
| Show the Finish on Curved Forms | Use a small sample of the actual model first; ribs, curves and angled faces catch highlights differently from flat panels. |
| Balance Temperature and Layer Bonding | Start within 210–230°C. If layer bonding needs improvement, raise temperature gradually and recheck the surface gloss. |
| Retain Fine Decorative Detail | Use 0.16mm layer height for a clean starting point on flutes, ribs and ornamental edges; reduce it for finer detail. |
| Print Tall Vases Securely | Clean the build plate, check first-layer contact and add a brim for narrow-footprint or tall designs where needed. |
| Control Stringing | Check filament condition, nozzle temperature and retraction together; change retraction in small increments. |
| Protect the Silk Surface | Return opened spools to a sealed bag or dry box with desiccant between print jobs. |
Printer Compatibility & Setup Guide
| Printer / Feed Setup | Nozzle | Bed | Starting Speed | Compatibility Checks |
|---|---|---|---|---|
| Standard 1.75mm FDM / FFF printer | 210–230°C | 50–60°C | 50–100mm/s | Confirm the printer accepts third-party 1.75mm PLA; check spool-holder clearance and make sure the filament feeds freely. |
| Enclosed FDM printer | 210–230°C | 50–60°C | 50–100mm/s | Confirm the printer’s supported PLA temperature range, cooling setup and spool path before printing. |
| High-speed / high-flow printer | 210–230°C | 50–60°C | Start at 50–100mm/s; increase only after flow calibration. | Use the machine’s volumetric-flow limit as the speed ceiling; verify extrusion flow, surface finish and layer bonding with a test print before increasing speed. |
| Automatic material / multi-spool feeder | 210–230°C | 50–60°C | Begin with a single-spool test. | Check feeder-specific spool dimensions, filament restrictions and loading / unloading path. Verify reliable feeding before multi-material or unattended printing. |
| Direct-drive / Bowden extruder | 210–230°C | 50–60°C | 50–100mm/s | Set retraction for the installed extruder and tune with a test print; confirm the filament path has no sharp bends. |
Start with the listed PLA Silk window, confirm the printer and feeder fit, then validate flow and surface quality on a sample before production printing.
Performance Characteristics
| Characteristic | Product Specification / Appearance | Practical Reference |
|---|---|---|
| Filament Diameter | 1.75mm nominal diameter; stated tolerance ±0.03mm. | A defined dimensional specification for standard 1.75mm FDM / FFF purchasing requirements. |
| Silk Surface Finish | Reflective sheen across opaque lacquer red and warm gold. | Curves, ribs and raised details create changing highlights; consistent outer-wall speed helps maintain an even appearance. |
| Color Appearance | Lacquer red with a slight orange lean and warm gold with an amber tone. | Printed color balance varies with model geometry, surface angle and lighting. |
| Print Speed Window | 50–100mm/s standard starting range; up to 200mm/s after high-flow calibration. | Keep visible outer walls slower when surface gloss is the priority. |
| Net / Gross Weight | 1kg net filament weight; 1.3kg gross weight per spool. | Use unit gross weight for preliminary freight planning; carton and pallet weights follow the packing specification. |
| Packaging Format | Plastic spool in a vacuum-sealed bag with desiccant. | Keep the spool sealed between jobs to limit moisture exposure during storage. |
Applications
| Application Focus | Practical Notes |
|---|---|
| Fluted Vases and Ribbed Vessels | Ridges and curved walls create moving highlights that bring out the Silk finish on display surfaces. |
| Woven Lattice Spheres | Open geometry exposes multiple surface angles; tune bridging and outer-wall speed on the intended design. |
| Openwork Ornaments | Decorative cutouts and sculptural forms show the reflective Silk finish from several viewing angles. |
| Seasonal and Event Décor | The warm red-and-gold palette suits festive displays, themed collections and event decoration. |
| Giftware and Boutique Home Décor | Use the reflective finish for tabletop accessories, decorative containers and statement pieces. |
| Retail Display and Creator Merchandise | Its reflective Silk finish gives retailers and creators a distinctive option for limited-edition collections and display models. |
| Architectural and Interior Presentation Models | Use the sheen to emphasize curved profiles, decorative ribs and non-structural presentation details. |
Storage Guide
- Store the spool in a cool, dry location away from direct sunlight and heat sources.
- Keep the original vacuum-sealed bag closed until the filament is ready for use.
- After opening, return the spool to an airtight bag or dry box with fresh desiccant.
- In humid environments, minimize open-air exposure between print jobs and keep storage conditions controlled.
- If moisture-related bubbling or stringing appears, dry the filament using the current handling instructions for this SKU and the spool’s temperature limit.
OEM / ODM Services
SSSray manufactures filament for distributors, wholesalers, importers and private-label brands. For this Red & Gold Silk PLA, our OEM team can coordinate brand labels, retail box artwork, barcode and SKU placement, language labels, carton marks and export packaging. We work from your target market, required presentation and order volume so the approved product and packaging are aligned before production.
Order quantities: Neutral packaging starts at 50 rolls. OEM packaging typically starts at 500–1,000 rolls, depending on artwork and customization scope. Qualified buyers can request up to three sample spools before moving to a bulk order; freight is arranged separately.
Factory Quality Control
SSSray manufactures filament in a 10,000m² facility in Jinhua, Zhejiang, with 50+ extrusion lines, production capacity of up to 35 tonnes per day and up to 1,000 tonnes per month. Our factory quality-control process includes online laser diameter monitoring, color measurement, moisture analysis, melt-flow testing, tensile testing, precision weighing and print validation. For this Silk PLA order, we align production and inspection with the approved 1.75mm ±0.03mm specification, red-and-gold color reference, 1kg net weight, spool winding and vacuum-pack requirements.
- Online diameter control: Monitor filament diameter during extrusion against the specified 1.75mm ±0.03mm target.
- Color consistency: Compare lacquer-red and warm-gold appearance with the approved color reference under consistent lighting.
- Moisture and melt-flow checks: Use material checks to support stable processing and appropriate packaging.
- Winding and payout inspection: Review spool winding, flange condition and filament payout before packing.
- Net-weight verification: Check the 1kg net filament weight per spool, excluding spool and packaging.
- Print and packing review: Review representative print results, vacuum sealing, desiccant and shipment identification.
Technical Documents & Compliance Support
SSSray supports distributor and OEM qualification with technical documents matched to the material, supplied SKU and destination market. Include your document requirements with the RFQ so our team can confirm the applicable revision and scope before order approval.
- TDS: Request the current technical data sheet for the Red & Gold Silk PLA specification and print-setting guidance.
- SDS / MSDS: Request the safety data sheet applicable to the supplied formulation and destination market.
- RoHS / REACH: Applicable declarations or test reports can be reviewed where the document scope covers the material and market.
- SGS / Third-Party Testing: Third-party testing can be arranged for an agreed sample, test scope and project requirement.
- Factory Quality System: SSSray’s factory quality management system operates to ISO 9001:2015; the factory certificate can be requested from our team.
Frequently Asked Questions
What is the main selling point of this Red & Gold Silk PLA?
The defining feature is its reflective Silk finish, paired with a warm lacquer-red and gold colorway. The sheen is particularly noticeable on fluted vases, curved vessels, lattice spheres and other decorative forms with varied surface geometry.
Is this a metallic filament?
No. This is PLA Silk with a reflective surface finish, not a metal-filled filament or a metal coating. Its appearance comes from the silk-finish formulation and the lacquer-red / warm-gold colorway.
Which printers can use this 1.75mm filament?
This filament is intended for 1.75mm FDM / FFF printers that accept third-party PLA. Before printing, confirm the exact model’s filament path, spool-holder clearance and hotend temperature range. For automatic or multi-spool feeders, check the manufacturer’s supported spool dimensions and filament requirements, then verify loading and unloading with a test. Send SSSray your printer model for a model-specific setup recommendation.
What print settings should I start with?
Start at 210–230°C nozzle temperature, 50–60°C bed temperature and 50–100mm/s overall speed. High-flow systems can be tuned toward 100–200mm/s after volumetric-flow calibration. For a more even Silk sheen, keep visible outer walls around 30–50mm/s.
Which models best show the Silk finish?
Fluted vases, ribbed vessels, woven lattice spheres, openwork ornaments, seasonal décor, giftware and sculptural display pieces make good use of the reflective surface.
What are the MOQ and lead time?
Neutral packaging starts at 50 rolls. OEM packaging typically starts at 500–1,000 rolls. Standard orders are 7–15 days; customized orders are 15–25 days. The final schedule is confirmed with the approved order specification.
Can qualified buyers request samples?
Yes. Qualified B2B buyers may request up to three complimentary 1kg sample spools after review. Sample availability and freight arrangements are confirmed separately before dispatch.
Can SSSray provide private-label packaging and export terms?
Yes. Our factory supports custom labels, retail boxes, barcodes, carton marks and OEM packaging programs. Standard payment terms are 30% deposit and 70% before shipment; trade terms are FOB Ningbo or EXW.
Add Red & Gold Silk PLA to Your Decorative Filament Range
Source SSSray Red & Gold Silk PLA directly from the factory. Send us your target quantity, destination market and packaging requirements for a bulk quotation, sample evaluation or OEM plan.



