Home » 3D Printer Filament Product Catalog » Violet & Emerald Sequential Silk PLA
SSSRAY PLA SILK SERIES | SEQUENTIAL-SECTION DUAL-COLOR PLA | WHOLESALE & OEM / ODM

SSSray Violet & Emerald Green Dual-Color Silk PLA 3D Printer Filament – filament PLA bicolore for Sculptural Display Prints

Sequential-section Violet & Emerald Green Silk PLA for sci-fi models, sculptural displays, distributors, and private-label filament ranges.

Violet-purple and emerald-green color sections run one after another along the filament length. The printer feeds each section through a standard single-nozzle FDM / FFF setup, so the finished model changes color when the next section reaches the hot end. This is a sequential color-change filament, not a side-by-side co-extruded strand or a continuous rainbow gradient. The 1kg plastic spool is supplied with a stated 1.75mm diameter, ±0.03mm tolerance, vacuum sealing, and desiccant protection.

Sequential Color Sections
Single-Nozzle FDM / FFF
7–15 Days Standard Lead Time
FOB Ningbo / EXW Jinhua Factory · Qualified B2B Samples
Sequential Color Sections 1.75mm · ±0.03mm 1kg Net Spool Silk-Gloss Finish Vacuum + Desiccant OEM / ODM Support
MaterialDual-Color Silk PLA
Color StructureSequential sections along filament length
Color PairingViolet Purple + Emerald Green
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Nozzle Temp210–230°C
Bed Temp50–60°C
Print Speed50–120mm/s recommended
PackagingVacuum + Desiccant
Spool TypePlastic Spool

MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.

Lead Time: Standard orders 7–15 days; customized orders 15–25 days.

Product Overview

SSSray Violet & Emerald Green Dual-Color Silk PLA is a 1.75mm FDM / FFF filament built around two sequential color sections arranged along the filament length. The strand feeds through a standard single-nozzle setup: one color section runs through the hot end before the next section reaches it, creating a visible color change as the print consumes the spool. This is not a side-by-side co-extruded filament or a continuous rainbow gradient. The transition appears where the filament boundary is extruded, so its position on the finished model depends on total filament consumption, model geometry and toolpath. We recommend this SKU for sci-fi spacecraft, armor shells, character busts, tabletop display pieces and sculptural objects with enough surface area to show the color change. Its silk-gloss surface brings reflective highlights to curved panels and raised details. Each spool carries 1kg net filament, a 1.75mm nominal diameter and ±0.03mm tolerance, with vacuum-sealed packaging and desiccant protection. SSSray supplies this display-focused PLA for wholesale orders, neutral packaging from 50 rolls and OEM packaging programs typically from 500–1,000 rolls. Qualified B2B buyers can request sample spools for printer and market evaluation.

For related finishes, browse our SSSray PLA Silk filament range. For bulk purchasing and brand development, see our wholesale PLA filament and private-label 3D printer filament programs.

Color Structure & Sample Approval

Violet-purple and emerald-green sections are joined end-to-end along the filament length. The transition appears when the next section reaches the hot end, so its position on a printed part depends on filament consumption and the model’s toolpath. Before a wholesale or private-label order, we recommend printing a sample spool on the intended printer and reviewing the transition on the target model.

Key Selling Points

Sequential Color Construction

Violet-purple and emerald-green sections follow one another along a single filament strand and pass through a standard single-nozzle setup.

Silk Gloss for Display Prints

The reflective surface brings out curved shells, armor contours and raised details on decorative and sculptural models.

Wholesale & Private-Label Supply

Neutral packaging starts at 50 rolls; OEM packaging typically starts at 500–1,000 rolls for approved label and retail-pack projects.

Sample & Order Approval Checks

Check PointHow We Check It
Color TransitionWe print a sample using the intended model size and orientation, then review where the violet-to-emerald boundary appears on the finished part.
Filament DiameterWe check the 1.75mm nominal diameter against the stated ±0.03mm tolerance using the inspection method agreed for the order.
Silk Surface FinishWe review gloss consistency on curved and flat surfaces against the approved sample profile.
Spool and PackagingWe confirm 1kg net filament per spool and the vacuum-sealed bag with desiccant before dispatch.
Bulk-Order ReleaseWe align the approved sample appearance, label artwork and packing specification before production release.

Wholesale Fit for Your PLA Range

We support distributors adding a distinctive sequential-color Silk PLA option to their existing ranges. Private-label buyers can align spool labels, retail-box artwork and carton marks with the approved sample. Neutral packaging starts at 50 rolls; OEM packaging typically starts at 500–1,000 rolls, depending on the approved customization scope.

How We Work

1
Market, Model & Order Brief
2
Color Sequence & SKU Confirmation
3
Sample Print & Transition Review
4
Label & Retail-Pack Approval
5
Production & Six-Point QC
6
Export Packing & Shipment

PLA Material Comparison

PLA TypeSurface / Color EffectTypical Buyer Use
Violet & Emerald Sequential Silk PLAHigh-gloss Silk finish with violet-purple and emerald-green sections arranged one after another along the filament length.Distinctive display prints, sci-fi models, figures and decorative retail products.
Standard PLAUsually supplied as a single-color material; surface finish varies from matte to semi-gloss by grade and pigment.General prototypes, concept models, classroom projects and decorative prints.
PLA+ / PLA ProModified PLA formulations; stiffness, impact response and print behaviour vary by supplier.General-purpose parts where the selected formulation’s mechanical profile is preferred.

Select the PLA grade according to the required surface appearance and part performance; use the print profile specified for the exact material.

Technical Specifications

Product NameSSSray Violet & Emerald Green Dual-Color Silk PLA 3D Printer Filament – filament PLA bicolore for Sculptural Display Prints
MaterialDual-Color Silk PLA (Polylactic Acid), FDM / FFF 3D printing material
Product SeriesSSSray PLA Silk Series – Dual-Color Creative & Display Collection
Color / EffectViolet Purple & Emerald Green – high-gloss Silk finish with sequential color sections
Filament ConstructionSequential color sections arranged along the filament length; not side-by-side co-extrusion
Color TransitionOne color section follows the next as filament feeds through a single nozzle; transition position depends on filament consumption and toolpath
Filament Diameter1.75mm standard for this SKU
Diameter Tolerance±0.03mm
Net Filament Weight1kg per spool
Gross Weight1.3kg per packaged spool
Spool TypePlastic spool
PackagingVacuum-sealed bag with desiccant
Printing TechnologyFDM / FFF
Recommended Nozzle Temperature210–230°C; start at 215°C and tune for the printer and desired silk finish
Recommended Bed Temperature50–60°C
Recommended Print Speed50–120mm/s recommended; 40–200mm/s usable after flow and temperature calibration
Recommended Layer Height0.16–0.20mm for a 0.4mm nozzle
Printer CompatibilityMost open-material 1.75mm FDM/FFF printers, subject to the printer’s material and temperature limits
Typical ApplicationsSculptural display prints, figurines, sci-fi models, decorative vessels, props, and creative retail products
OEM / ODMAvailable for qualified B2B projects
Technical / Compliance DocumentsRequest the applicable TDS and SDS/MSDS for the confirmed SKU; compliance documents are supplied where they apply to the product and destination market

Recommended Print Settings

ParameterRecommended Starting ValuePractical Adjustment Range
Nozzle Temperature210–230°C; begin at 215°C200–240°C after temperature-tower and extrusion checks.
Bed Temperature50–60°C45–60°C; match the surface and first-layer requirements.
Print Speed50–120mm/s overall40–200mm/s after flow and temperature calibration; use lower speeds for visible outer walls.
Outer-Wall Speed30–50mm/s30–60mm/s; keep the speed steady across visible panels and curved surfaces.
Layer Height0.16–0.20mm with a 0.4mm nozzle0.12–0.28mm according to detail and nozzle diameter.
Part Cooling Fan80–100% after the first 2–3 layers50–100%; tune for overhangs, layer bonding, and small features.
Retraction – Direct Drive0.8–1.2mm at 25–40mm/s0.5–1.5mm; tune to the extruder and hotend.
Retraction – Bowden3–5mm at 25–40mm/s2–6mm; tune to the Bowden path and hotend.
Wall Count3 perimeters2–4 perimeters according to shell strength and appearance.
Infill15–20% for decorative models40–60% for thicker display parts where additional internal support is needed.
First-Layer Speed20–30mm/s15–35mm/s; prioritize a stable, continuous first layer.
Bed AdhesionClean PEI, satin PEI, or suitable glass surfaceUse a compatible adhesive/release aid only when required by the build plate.
Pre-Print Drying50–55°C for 6–8 hours when moisture symptoms appearUse a temperature-controlled filament dryer and verify spool heat limits.

For a clean production setup, run a temperature tower, flow check, and small appearance sample on the target printer before saving the material profile.

Print Optimization Guide

Optimization FocusPractical Guidance
Sequential Color TransitionThe color sections run one after another along the filament length. The transition prints when the next section reaches the hot end; its position on the model follows cumulative filament use and the toolpath. Test the intended model size before preparing retail samples.
Show the Violet / Emerald ContrastChoose a model with broad visible surfaces—such as a spacecraft fuselage, armor shell or display bust—so the color change is easy to see. Small prints may finish before the transition reaches a prominent area.
Silk GlossKeep outer-wall speed steady at 30–50mm/s for visible surfaces. Avoid abrupt speed changes that can create uneven sheen across curved panels.
Temperature TuningBegin at 215°C and adjust in 5°C steps within the recommended range. Keep the temperature high enough for consistent extrusion without sacrificing surface definition.
Cooling BalanceUse moderate-to-high part cooling after the first layers for overhangs and fine details. Reduce fan output if small features or layer bonding require adjustment.
Stringing ControlKeep the filament dry, clean the nozzle and tune retraction for the actual extruder. Direct-drive and Bowden retraction values are not interchangeable.
Bed AdhesionClean the PEI or other compatible build surface, slow the first layer and verify Z-offset before increasing bed temperature.
Large Display ModelsUse a brim for narrow contact areas or tall, slim models. Keep the printer away from drafts to reduce first-layer and cooling variation.

Printer Brand Starting Settings

Printer EcosystemNozzle StartBed StartOuter-Wall StartProfile / Setup Notes
Bambu Lab A1 / P1 / X1215–225°C55–65°C on Smooth PEI; 65–85°C on Textured PEI (Bambu PLA reference)35–50mm/sBambu Lab’s current PLA guide lists 55–65°C for Smooth PEI and 65–85°C for Textured PEI. Start with a Generic PLA or Silk PLA profile, then verify first-layer adhesion with this Silk PLA and the selected plate.
Prusa MK4 / MK4S / MINI+215°C first layer; 210–220°C after60°C30–45mm/sBegin with the PLA profile, then tune for Silk gloss. Smooth or satin PEI provides a practical starting surface.
Creality K1 Series / K2 Plus220–230°C45–50°C40–60mm/sUse the Generic Silk PLA profile where available. On K1-family Silk profiles, retain the material’s temperature and flow limits while slowing visible walls for finish.
Flashforge Adventurer 5M / 5M Pro210–230°C45–60°C40–60mm/sSelect Silk PLA or Generic PLA as the base profile; do not transfer a high-speed preset without checking flow and outer-wall quality.

Select the closest PLA / Silk PLA profile, then confirm first-layer adhesion, extrusion flow and outer-wall finish on the exact printer model before running the full display piece.

Performance Characteristics

CharacteristicProduct BehaviourPractical Reference
Silk Surface AppearanceHigh-gloss finish creates reflective highlights on curved panels and raised details.Keep outer-wall speed steady at 30–50mm/s and tune temperature and cooling on the target printer.
Print SetupPLA-based FDM / FFF filament for standard 1.75mm feed paths.Start within the stated 210–230°C nozzle and 50–60°C bed ranges; qualify the profile with a sample print.
Application PositionDesigned for decorative, sculptural and general-purpose PLA display prints.Choose another material family for sustained high-temperature, outdoor or heavy-load engineering service.

Applications

Application FocusPractical Notes
Sci-Fi Starfighters & Spacecraft ShellsBroad fuselage and wing surfaces give the violet / emerald sequence room to appear across a recognizable display model.
Mecha Armor & Fantasy CreaturesLayered armor plates, curved shells and larger body sections provide visible areas for the sequential color transition.
Character Busts & Collectible FiguresUse a representative bust or larger figure when you want the color boundary to show across a prominent surface rather than a small detail.
Tabletop Terrain & Diorama FeaturesFuturistic structures, display bases and terrain pieces can use the two-color sequence to separate large visual zones within one filament feed.
Sculptural Vessels & Desk ObjectsCurved walls and taller forms can reveal the color change as the print consumes more filament; test the intended height and wall geometry.
Retail Display & Gift CollectionsA violet-and-emerald sequential Silk PLA SKU adds a clear color-story option to themed model, collectible and decorative product ranges.

Storage Guide

  • Keep unused filament in its vacuum-sealed bag with the supplied desiccant; reseal promptly after opening.
  • Store in a cool, dry location away from direct sunlight, heat sources, and rapid temperature changes.
  • For opened spools, use a sealed storage box with fresh desiccant; an internal humidity target of 20% RH or lower is a practical storage reference.
  • If stringing, popping, or inconsistent extrusion indicates moisture exposure, dry at a controlled 50–55°C for 6–8 hours, subject to the spool’s heat limit.
  • Keep the filament path clean and avoid letting the free end unwind or cross over adjacent turns during storage.

OEM / ODM Services

SSSray supports distributors, wholesalers, importers and private-label brands that want a Silk PLA SKU with a clear visual identity. For this Violet & Emerald Green product, we can coordinate the product name, color-sequence description, spool label, retail-box artwork, barcode, outer-carton marks and export packing details as one order specification. Buyers can also discuss custom color combinations, spool presentation and packaging formats for a wider branded range.

As a factory-direct 3D printer filament manufacturer in Jinhua, China, SSSray aligns the material specification, sample appearance and packaging artwork with your purchasing team before bulk production. Neutral packaging starts from 50 rolls; OEM packaging typically starts from 500–1,000 rolls, depending on the approved customization scope. We recommend approving a physical sample and final artwork before production release.

Quality Control

  • We identify incoming raw materials and color batches before production release.
  • We monitor filament diameter during extrusion against the 1.75mm ±0.03mm specification.
  • We inspect the filament surface and violet / emerald color sequence for visible contamination, streaking and finish consistency.
  • We check spool winding alignment, tension, cross-over risk and filament-end retention before packing.
  • We carry out sample extrusion and print verification against the approved reference profile and appearance sample.
  • We check vacuum sealing, desiccant, product labels and export-carton marks before shipment.

Certifications & Technical Documentation

  • Technical Data Sheet (TDS): Request the applicable technical specification for the confirmed Violet & Emerald Green Silk PLA SKU.
  • Safety Data Sheet (SDS / MSDS): Our team confirms the applicable safety document for the selected material and shipment file.
  • RoHS / REACH: Compliance documents are supplied when they cover the confirmed formulation and product scope.
  • CE: We do not present CE as a filament certification for this SKU.
  • SGS / Third-Party Testing: Any report shared for buyer review identifies its tested product scope and issuing laboratory.

For wholesale and OEM orders, tell our sales team which technical or compliance files your purchasing process requires. We will confirm the documents applicable to the selected product and destination market.

Frequently Asked Questions

How is the violet and emerald color effect arranged in this filament?

The two colors are arranged in sequential sections along the filament length. One section feeds through the nozzle before the next section arrives, so the printed color changes as the spool is consumed. The colors are not side-by-side in the same cross-section and do not require a second filament feed.

Where will the color transition appear on my printed model?

The transition appears when the filament boundary reaches the hot end. Its position on the model depends on the amount of filament consumed, the model geometry and the slicer’s toolpath. For a retail demonstration, test the intended model size and print orientation with a sample spool first.

What is the MOQ for this dual-color Silk PLA?

Neutral packaging starts from 50 rolls. OEM packaging typically starts from 500–1,000 rolls, depending on the custom label, retail box and packaging scope.

Can I request samples before placing a wholesale order?

Qualified B2B buyers can apply for up to 3 free full-size 1kg sample spools after project review. We confirm the sample combination and dispatch arrangements before shipment.

Which printers can use this 1.75mm filament?

It is designed for most open-material 1.75mm FDM / FFF printers, including common Bambu Lab, Prusa, Creality and Flashforge systems. Confirm the printer’s filament path, material profile, extruder setup and temperature limits before printing.

What nozzle and bed temperatures should I start with?

Start at 215°C nozzle temperature and 50–60°C bed temperature. The recommended nozzle range is 210–230°C. Tune in small increments for the printer, build plate, model geometry and desired Silk gloss.

Can SSSray customize the label, packaging or color combination?

Yes. OEM / ODM options include private-label spool labels, retail-box artwork, barcodes, outer-carton marks and project-based color development. Custom projects are reviewed against the required specification, MOQ and production schedule.

What are the lead time and shipping terms?

Standard orders are scheduled for 7–15 days; customized orders for 15–25 days. We support FOB Ningbo, China and EXW SSSray Factory, Jinhua, Zhejiang, China, under Incoterms® 2020. Ningbo, China is the stated port of loading for FOB shipments.

Add Violet & Emerald Sequential Silk PLA to Your Display Filament Range

Bring a sequential violet-and-emerald color story into your PLA range with a single-nozzle Silk PLA spool. Contact SSSray for bulk pricing, sample qualification, private-label packaging and an export quotation matched to your order quantity and destination market.