Home » 3D Printer Filament Product Catalog » Glossy Emerald Green PETG
PETG Basic Series | Glossy Emerald Green | Wholesale & OEM

Glossy Emerald Green PETG 3D Printer Filament | Filament PETG Groen | SSSray PETG Basic for Racing Quad Frames & Origami Pen Cups

Opaque glossy PETG for distributors, private-label programs, and buyers building functional-and-decorative green filament lines.

We supply this emerald green PETG for crisp faceted desk pieces, drone accessories, printed frame prototypes, brackets, holders, and general-purpose functional parts where buyers want PETG toughness with a polished single-color finish.

±0.03mm Diameter Control
7–15 Days Standard Lead
FOB Ningbo / EXW
Up to 3 B2B Samples
RoHS Compliant Vacuum Packed Tangle-Free Winding OEM / ODM 1kg / 3kg / 5kg
MaterialPETG Basic
SeriesEmerald Green
Color EffectOpaque Glossy Green
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Nozzle Temp235–255°C
Bed Temp70–80°C
Print Speed60–150 mm/s
PackagingVacuum + Desiccant
Spool TypePlastic Spool

MOQ: Neutral packaging from 50 spools; OEM packaging typically 500–1,000 spools.

Lead Time: Standard 7–15 working days; customized orders typically 15–25 working days.

Product Overview

Glossy Emerald Green PETG 3D Printer Filament is our opaque single-color PETG Basic grade for buyers who want a saturated green with a polished surface rather than a translucent, silk, glitter, or metallic effect. The slightly cool, bluish undertone reads closer to emerald than lime or forest green. On faceted desk pieces, angled walls catch bright highlights while fine layer lines remain visually clean; on printed drone-frame prototypes, arms, cut-outs, and screw features can retain a crisp technical appearance when flow, temperature, and cooling are tuned correctly.

We supply this 1.75mm grade for wholesale, distribution, private-label, and OEM programs that need a marketable color with practical PETG behavior. The filament is wound for orderly feeding, dried before vacuum packing with desiccant, specified at ±0.03mm diameter tolerance, and packed on a standard plastic spool. PETG’s balance of toughness, layer bonding, and lower warping tendency than ABS makes the grade useful for functional accessories, brackets, mounts, desk products, and geometry-validation parts. Standard 1kg supply is available, with 3kg and 5kg formats on request.

Emerald Green PETG Built for Functional and Display-Ready SKUs

This grade gives buyers a color that looks premium on the shelf and still makes sense for practical PETG applications. The deep emerald tone reads consistently across spool and printed part, while the glossy surface accentuates clean edges, angled planes, and curved walls. For distributors and private-label brands, that combination supports one SKU across desk accessories, hobby hardware, drone accessories, brackets, holders, and visually exposed functional parts instead of limiting the color to decorative models alone.

Key Selling Points

±0.03mm Diameter Control

Specified diameter tolerance supports stable feeding and more repeatable extrusion across routine production runs.

Opaque Glossy Emerald

A saturated single-color green with a cool emerald tone and polished surface highlights on printed parts.

PETG for Practical Parts

Balanced toughness and layer bonding make the grade suitable for mounts, brackets, holders, and prototype structures.

Neat Winding & Dry Packing

Orderly winding, pre-packing drying, desiccant, and vacuum sealing support cleaner storage and feeding.

Wholesale-Friendly Formats

Standard 1kg spools, 50-spool neutral MOQ, and 3kg or 5kg formats available on request.

OEM / Private Label Support

Custom labels, branded boxes, carton marks, spool options, and private-label presentation can be developed for volume programs.

Key Features

FeaturePractical Buyer Benefit
Opaque Emerald GreenCreates a recognizable premium green SKU without silk, glitter, metallic, or translucent effects
Glossy PETG SurfaceHighlights faceted geometry, clean edges, and polished-looking outer walls
±0.03mm Diameter ToleranceSupports stable feeding for wholesale users running mixed printer fleets
Low-Warp PETG BehaviorUseful for medium-size functional and desk parts without the enclosure demands typical of ABS
Vacuum Sealed + DesiccantHelps control moisture exposure during export storage and transit
OEM / Private Label ReadySupports custom labels, branded boxes, carton marks, and channel-specific packaging programs

Balanced Quality and Cost Efficiency

For B2B buyers, the commercial value of this SKU is its ability to cover both functional and appearance-driven demand. PETG is familiar to end users who want more toughness and temperature resistance than basic PLA, while the emerald green gloss creates a visually differentiated retail option. A 50-spool neutral-packaging MOQ makes the color practical for distributor testing, and OEM packaging can scale into 500–1,000-spool programs once the market response is proven. The same grade can support desk accessories, hobby parts, brackets, mounts, and printed drone components, helping buyers reduce the need for separate decorative and utility-only green SKUs.

How We Work

1
Requirement & Market Review
2
Color & Specification Confirmation
3
Sample & Print Validation
4
Packaging & Label Setup
5
Production & Batch QC
6
Final Check & Shipment

Material Comparison Guide

MaterialSurface / Color CharacterWarping BehaviorEnclosureTypical Use
PETG BasicGlossy to semi-gloss; strong solid-color presentationGenerally lower warping than ABS / ASANormally not required for standard partsBrackets, mounts, holders, desk parts, functional hobby components
PLA / PLA+Wide color range; usually sharper small-detail presentationLow under normal indoor printing conditionsNot normally requiredDisplay models, prototypes, decorative parts, general consumer printing
ABSSolid engineering-style surfaceHigher shrinkage and warping sensitivity than PETGRecommended, especially for larger partsHousings, fixtures, tooling, functional prototypes
ASASolid surface with outdoor-oriented material positioningHigher shrinkage and warping sensitivity than PETGRecommended, especially for larger partsOutdoor housings, fixtures, covers, weather-exposed parts

Technical Specifications

Product NameGlossy Emerald Green PETG 3D Printer Filament | Filament PETG Groen | SSSray PETG Basic for Racing Quad Frames & Origami Pen Cups
MaterialPETG (polyethylene terephthalate glycol-modified)
SeriesSSSray PETG Basic Series
Color / FinishOpaque glossy emerald green with a slightly cool, bluish undertone
Filament Diameter1.75mm standard; 2.85mm available on request
Diameter Tolerance±0.03mm
Roundness Deviation≤0.02mm
Density1.27 g/cm³
Melt Flow Rate (MFR)6–8 g/10 min at 230°C / 2.16kg (ASTM D1238)
Tensile Strength (XY)50 ± 2 MPa (ASTM D638)
Tensile Modulus (XY)2,362 MPa (ASTM D638)
Elongation at Break5–15% (ASTM D638)
Flexural Strength (XY)77 MPa (ASTM D790)
Flexural Modulus (XY)2,320 MPa (ASTM D790)
Izod Impact Strength (Notched)4–6 kJ/m² (ASTM D256)
Shore D Hardness78 (ASTM D2240)
Glass Transition Temperature (Tg)78.5°C (ASTM D3418)
Heat Deflection Temperature70°C @ 0.455 MPa (ASTM D648)
Vicat Softening Temperature82°C (ASTM D1525)
Water Absorption (24h)0.3–0.5% (ASTM D570)
Continuous Use Temperature≤70°C
Net Weight1kg standard; 3kg and 5kg available on request
Gross Weight1.3kg for standard 1kg spool package
Spool TypePlastic spool
PackagingVacuum sealed with desiccant
WindingOrderly, tangle-reduced winding for stable feeding
Color EffectSolid single color; not silk, glitter, metallic, or translucent
OEM / ODMSupported for labels, boxes, spool presentation, and private-label programs
ComplianceRoHS compliant

Recommended Print Settings

ParameterRecommended Guidance
Recommended Nozzle Temperature235–255°C
Usable Nozzle Range220–270°C
Recommended Bed Temperature70–80°C
Usable Bed Range65–90°C depending on build surface and first-layer behavior
Recommended Print Speed60–150 mm/s for balanced gloss, edge quality, and layer bonding
Usable Speed Range40–250 mm/s after flow and temperature calibration
Layer Height0.12–0.30mm with a 0.4mm nozzle; 0.20mm is a practical general starting point
Cooling Fan0–50% general range; 25–50% is a practical starting point for most models
RetractionDirect drive 1–2mm / Bowden 3–5mm as starting references
Wall Count2–4 perimeters; use 3–4 for functional brackets and frame prototypes
Infill15–25% desk / decorative parts; 40–60% functional prototypes where additional internal support is needed
First Layer Speed20–30 mm/s
Bed AdhesionTextured or satin PEI preferred; use a release layer on smooth PEI or glass if adhesion is excessive
Drying When Moist60–65°C for 4–6 hours

Print Optimization Guide

ItemGuidance
Gloss ConsistencyKeep outer-wall speed and nozzle temperature stable; slower outer walls usually produce more even highlights on emerald green surfaces
Stringing ControlDry the filament if fine strings increase, then tune retraction and travel behavior before lowering temperature aggressively
Frame Hole AccuracyUse 3–4 walls and moderate outer-wall speed around screw holes, arm cut-outs, and thin frame features
First-Layer ReleasePETG can bond strongly to smooth surfaces; textured / satin PEI or a suitable release layer helps protect the build plate
Cooling BalanceUse enough fan for bridges and small features without overcooling functional walls that rely on strong layer bonding
Moisture ControlReseal after printing and keep desiccant active; absorbed moisture commonly appears as extra stringing, popping, or rougher extrusion

Printer Brand Starting Settings

Printer FamilyNozzleBedSpeedCoolingStarting Note
Flashforge Adventurer / Guider / Creator PETG Class220–240°C70–80°C40–60 mm/s30–50%Standard PETG starting profile; use a slightly higher nozzle temperature within the SSSray range when flow demand increases
Bambu Lab X1 / P1 / A1 Class240–250°C70–75°C80–160 mm/s20–50%Start below the material’s upper flow limit, then raise speed only after extrusion and gloss remain consistent
Prusa MK4 / CORE One Class240–250°C80–90°C50–100 mm/s40–50%Textured or satin sheet is preferred; use a release layer on smooth PEI
Creality K1 / Ender Class235–250°C70–80°C40–80 mm/s20–30%Prioritize a stable first layer and dry filament before increasing speed
Anycubic Kobra Class235–250°C60–70°C60–120 mm/s20–40%Use the lower half of the range for high-gloss outer walls and small mechanical features

These are SSSray starting references for this PETG Basic grade. Final settings should be tuned to nozzle size, flow calibration, build surface, ambient conditions, and model geometry.

Performance Characteristics

CharacteristicTypical Value / BehaviorBuyer & Production Reference
Color & SurfaceOpaque glossy emerald green with a slightly cool undertoneAngled planes and curved walls show strong highlight definition while retaining a solid single-color appearance
Diameter & Roundness±0.03mm tolerance; ≤0.02mm roundness deviationSupports stable feeding and repeatable extrusion across standard 1.75mm FDM workflows
Melt Flow Rate6–8 g/10 min at 230°C / 2.16kgStandard PETG Basic flow window for balanced surface quality and functional-part production
Tensile Performance50 ± 2 MPa strength; 2,362 MPa modulus; 5–15% elongationUseful for functional brackets, mounts, holders, and geometry-validation parts
Flexural Performance77 MPa strength; 2,320 MPa modulusProvides practical stiffness for desk pieces, fixtures, and hobby hardware
Impact & Hardness4–6 kJ/m² notched Izod; Shore D 78Balances rigidity with PETG’s practical toughness for repeated-use parts
Thermal ReferenceTg 78.5°C; HDT 70°C @ 0.455 MPa; Vicat 82°CGives buyers clear thermal reference points for general PETG applications
Moisture Reference0.3–0.5% water absorption (24h)Vacuum packing, desiccant, dry storage, and 60–65°C × 4–6h re-drying support stable extrusion
Continuous Use Reference≤70°CUse as a material reference for application screening together with actual part geometry and load conditions

Applications

Application FocusPractical Notes
Racing Quad Frame PrototypesUseful for geometry validation, component fit, screw-hole alignment, and printed test frames before choosing the final production structure
Drone Mounts, Guards & BracketsPETG toughness and slight ductility suit mounts, antenna supports, guards, camera brackets, and accessory structures
Origami / Faceted Pen CupsGlossy emerald green emphasizes angled planes and creates bright highlight transitions across faceted walls
Desk Organizers & HoldersSuitable for pen cups, stands, trays, cable holders, and other repeated-use desktop parts
Functional Brackets & FixturesUseful for general-purpose holders, clamps, light-duty fixtures, and workshop organization parts
Retail Demo & Color SamplesThe saturated opaque green works well for display pieces used to present color, gloss, and print-surface quality to end customers

Storage Guide

  • Keep opened spools in a sealed bag or dry box with active desiccant
  • Reseal promptly after printing, especially in humid production environments
  • Dry at 60–65°C for 4–6 hours when stringing, popping, or rough extrusion indicates moisture uptake
  • Store away from direct sunlight and prolonged high-temperature exposure
  • For long print jobs, feed from a low-humidity container when process consistency is important

OEM / ODM Services

We support distributors, importers, retail brands, e-commerce sellers, education suppliers, and industrial sourcing teams with neutral and private-label PETG programs. Options include custom labels, branded color names, retail boxes, carton marks, barcode layouts, spool presentation, and coordinated color-line development. Standard neutral orders start from 50 spools; OEM packaging typically starts from 500–1,000 spools depending on the customization scope.

For buyers building a broader PETG range, see our custom PETG filament program and private-label filament service.

Quality Control

  • Production-lot identification for order traceability and repeat-order follow-up
  • Diameter monitoring against the specified ±0.03mm tolerance
  • Emerald color and gloss appearance checked against the approved production reference
  • Winding appearance and free-end handling checked before packing
  • Vacuum bag, seal integrity, desiccant, spool, and unit-box inspection
  • Final carton quantity, label, shipping mark, and order-detail verification before dispatch

For qualification workflows, review our filament test protocol and batch QC data program.

Compliance & Technical Documentation

  • RoHS: This PETG Basic SKU is supplied as RoHS compliant.
  • TDS / SDS: Grade-specific TDS / SDS are supplied only when the current document version matches the ordered material.
  • Additional reports: REACH, SGS, CE, or other market-specific documents are not claimed for this SKU unless a current applicable document is confirmed.

Frequently Asked Questions

What is the MOQ for Glossy Emerald Green PETG?

Neutral packaging starts from 50 spools. OEM or custom retail packaging typically starts from 500–1,000 spools depending on the label, box, spool, and carton requirements.

Is this filament suitable for most 1.75mm FDM printers?

Yes. It is designed for most open-material 1.75mm FDM / FFF printers that can run PETG in the 230–260°C nozzle range. Start with the recommended settings above, then fine-tune flow, cooling, and retraction for the specific machine.

Is the emerald green transparent or metallic?

No. This is a fully opaque, glossy single-color emerald green. It is not silk, glitter, metallic, or translucent, and the slightly cool undertone is closer to emerald than lime or forest green.

Can it be used for racing quad frames?

It is well suited to printed frame prototypes, geometry checks, accessory structures, mounts, guards, and fit-validation parts. For competition or high-impact structural use, validate the printed geometry and wall design against the actual load and crash requirements of the project.

Can I request samples before a bulk order?

Verified B2B buyers can request up to 3 complimentary sample spools for material and printer evaluation. Use our sample page to submit the printer, material, and project details.

Can SSSray provide OEM or private-label packaging?

Yes. We support custom labels, branded boxes, carton marks, barcode layouts, spool presentation, and private-label PETG programs for qualifying volume orders.

What compliance and technical documents are available?

RoHS compliance is specified for this SKU. Grade-specific TDS / SDS are supplied only when the current document version matches the ordered material. Other reports are provided only when a current document is applicable to the requested grade and market.

What is the normal lead time?

Standard orders are typically 7–15 working days. Customized packaging or OEM orders are typically 15–25 working days after specifications and artwork are confirmed.

Build Your Emerald Green PETG Program with SSSray

Request bulk pricing, sample spools, or OEM / private-label options for Glossy Emerald Green PETG. We support distributor testing from 50 neutral-packed spools and can scale into customized packaging programs for established demand.