Online time
Monday to Friday: 9AM - 8PM
Weekend: 10AM - 5PM

SSSray Carbon Fiber PLA (PLA-CF) 3D Printer Filament 1.75mm in Oxblood Red – filamento PLA con fibra de carbono rojo – for PCB Fixtures & Adjustable Holders
Matte oxblood-red PLA-CF for rigid PCB assembly fixtures, adjustable holders, jigs, brackets, and workholding parts.
Built for B2B programs that need a distinctive low-reflection red, stable 1.75mm feeding, practical PLA-based processing, and a carbon-fiber-textured finish for functional fixtures and positioning hardware.
MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.
Lead Time: Standard 7–15 days; customized orders typically 15–25 days.
Product Overview
SSSray Oxblood Red PLA-CF is a PLA-based FDM filament compounded with chopped carbon fiber for buyers who need rigid, low-reflection printed fixtures with a more technical surface than standard PLA. The color is a deep brown-toned red rather than a bright scarlet: the matte base and fine carbon-fiber flecks create a restrained burgundy appearance that works well for PCB assembly fixtures, adjustable holders, inspection jigs, positioning brackets, knob-operated supports, and other shop-floor parts where easy visual identification is useful.
For wholesale and private-label programs, we supply the standard 1.75mm / 1kg format with ±0.03mm diameter tolerance, vacuum sealing with desiccant, neutral packaging from 50 rolls, and OEM packaging programs from 500–1,000 rolls. The PLA base keeps processing accessible on many open-material FDM platforms, while the carbon-fiber fill increases abrasion at the nozzle, so a hardened nozzle is recommended for production use. For screw-loaded or pivoting fixtures, use additional walls around holes, heat-set inserts or captured nuts for repeated tightening, and orient critical clamp or pivot loads across the stronger XY plane.
Oxblood Red Built for Fixture Identification
Oxblood Red gives a functional PLA-CF line a distinctive identity without turning the part into a glossy decorative print. Its dark red, slightly brown tone stays visually controlled under workshop lighting, while the matte carbon-fiber texture helps reduce reflections and softens visible layer lines. That combination is especially useful for fixture families, inspection stations, adjustable holders, and private-label engineering ranges that need color differentiation while retaining a technical appearance.
Key Selling Points
±0.03mm for Multi-Printer Runs
Controlled 1.75mm diameter supports consistent feeding and repeatable extrusion across wholesale, print-farm and fixture-production runs.
Matte Oxblood-Red Finish
Deep brown-toned red with fine carbon-fiber flecks for low-reflection fixtures and visually distinct workholding parts.
Rigid Fixture-Oriented PLA-CF
Well suited to jigs, brackets, PCB positioning fixtures, adjustable holders, and other parts that benefit from a stiff feel.
Dry-Sealed Export Packaging
1kg plastic spool, vacuum-sealed bag and desiccant support storage, sampling, distribution and export handling.
Wholesale-Ready Supply Program
Built for distributors, importers, resellers, industrial users and repeat private-label PLA-CF programs.
Private-Label Carbon-Fiber Program
Custom labels, branded cartons, color programs, spool options and OEM / ODM coordination support differentiated PLA-CF product lines.
Commercial Fit for Fixture & Workholding Programs
For buyers building an engineering-oriented filament assortment, PLA-CF fills the space between standard PLA and higher-temperature carbon-fiber composites. Oxblood Red adds clear SKU differentiation for fixture families, workstation tooling, prototype holders and branded industrial kits, while the PLA base keeps printer requirements accessible. For projects that need greater heat, impact or environmental resistance, we can match the application with other materials in our Wholesale Carbon Fiber Filament range. Bulk buyers can also use our 3D Printer Filament Qualification Program to compare settings, sample performance and repeat-order requirements before scale-up.
How We Work
Material Comparison Guide
| Material | Surface / Part Behavior | Typical Printing Conditions | Service Consideration | Typical Use |
|---|---|---|---|---|
| PLA-CF | Matte, fiber-textured, rigid feel, reduced layer-line visibility | Moderate nozzle / bed temperatures; hardened nozzle recommended | Best where stiffness, matte finish and easy PLA-class processing matter; reinforce screw-loaded zones with extra walls or inserts | Fixtures, jigs, holders, brackets, prototypes |
| PLA+ / Tough PLA | Smoother surface with more ductile behavior than many PLA-CF grades | Easy PLA-class processing; standard nozzle normally sufficient | Better choice where impact tolerance matters more than carbon-fiber texture | General functional parts, clips, housings |
| PETG-CF | Carbon-fiber texture with higher toughness in many formulations | Higher nozzle / bed temperature; hardened nozzle recommended | Better moisture and heat margin than PLA-based grades in many applications | Functional brackets, covers, machine accessories |
| PA-CF | Engineering composite with high stiffness; properties vary by nylon grade | High-temperature hotend, thorough drying, hardened nozzle | Selected when higher heat capability and engineering performance justify more demanding processing | Industrial tooling, machine parts, higher-demand fixtures |
Technical Specifications
| Product Name | SSSray Carbon Fiber PLA (PLA-CF) 3D Printer Filament 1.75mm in Oxblood Red – filamento PLA con fibra de carbono rojo – for PCB Fixtures & Adjustable Holders |
|---|---|
| Material | PLA-CF (Polylactic Acid compounded with chopped carbon fiber) |
| Series | SSSray PLA-CF Carbon Fiber Series – Matte Fixtures for Electronics Assembly & Workholding |
| Color / Effect | Oxblood Red; deep brown-toned red, matte and low-reflection with fine carbon-fiber flecks; solid single color |
| Filament Diameter | 1.75mm standard; 2.85mm available on request |
| Tolerance | ±0.03mm |
| Net Weight | 1kg standard; 3kg and 5kg options available on request |
| Gross Weight | 1.3kg |
| Spool Type | Plastic spool |
| Packaging | Vacuum sealed with desiccant |
| Nozzle Guidance | Hardened / abrasion-resistant nozzle recommended; 0.6mm preferred for production reliability, with hardened 0.4mm suitable for finer fixture detail |
| Printer Compatibility | Most open-material 1.75mm FDM / FFF printers with a suitable abrasion-resistant nozzle and temperature capability |
| Typical Applications | PCB positioning fixtures, adjustable holders, assembly jigs, inspection fixtures, brackets, pivot supports, knobs and workholding aids |
| OEM / ODM | Supported for labels, cartons, color programs, spool options and private-label projects |
| Technical / Compliance Documents | PLA-CF TDS and SDS are available in our Technical Documents Center; additional market-specific compliance files are supplied when applicable to the SKU and destination market |
Recommended Print Settings
| Parameter | Recommended Guidance |
|---|---|
| Recommended Nozzle Temperature | 210–230°C |
| Usable Nozzle Range | 200–245°C after flow, speed and layer-bonding calibration |
| Recommended Bed Temperature | 50–60°C |
| Usable Bed Range | 45–65°C; unheated printing can be used on suitable build surfaces with a clean, well-bonded first layer |
| Recommended Print Speed | 50–150 mm/s |
| Usable Speed Range | 40–200 mm/s; use the upper range on high-flow systems with matching nozzle temperature and volumetric flow |
| Drying | 60°C for 4–6 hours after moisture exposure or before critical production |
| Preferred Nozzle Size | 0.6mm hardened nozzle for production reliability; 0.4mm hardened nozzle for finer detail |
| Layer Height | 0.20–0.28mm preferred for composite flow; 0.12–0.16mm for finer detail at moderated speed |
| Cooling Fan | 60–100% after the first layers; reduce cooling if layer bonding needs improvement |
| Retraction | Direct drive 0.5–1.5mm at 25–40 mm/s; Bowden 3–5mm at 25–40 mm/s as starting ranges |
| Wall Count | 3–5 perimeters for fixture-oriented parts |
| Infill | 20–30% routine holders / 40–60% higher-demand fixtures; add extra walls around screw and pivot zones |
| First Layer Speed | 20–40 mm/s |
| Bed Adhesion | Clean smooth PEI, textured PEI or compatible build plate; use adhesive only when required by the surface |
Print Optimization Guide
| Item | Guidance |
|---|---|
| PCB Fixture Use | Designed for mechanical PCB positioning, inspection, assembly aids and holders. For static-sensitive electronics work, use a dedicated SSSray ESD-grade filament instead of standard PLA-CF |
| Screw & Thumb-Knob Areas | Increase wall count around holes, leave realistic bolt clearance, and use inserts or captured nuts when repeated tightening is expected |
| Pivot Features | Orient layers so pivot loads run across the stronger XY plane, and use inserts or captured nuts where repeated adjustment is expected |
| Surface Finish | Use moderate outer-wall speed and stable cooling to preserve the even matte oxblood-red surface |
| Composite Nozzle Care | Use abrasion-resistant hardware, avoid 0.2mm nozzles, and clean residual composite material before switching to fine-detail filaments |
| Heat Exposure | Best for room-temperature fixtures, jigs and assembly aids; choose a higher-temperature engineering composite for sustained high-heat stations |
| Moisture Control | Reseal with desiccant after use and dry before critical production when extrusion becomes rough, stringy or inconsistent |
Printer Brand Starting Settings
| Printer Brand / Platform | Nozzle | Bed | Speed | Starting Notes |
|---|---|---|---|---|
| Bambu Lab X1 / P1 / A1 families | 220–230°C | 50–60°C | 80–180 mm/s | Use a hardened 0.4 or 0.6mm nozzle; higher-flow profiles can move toward the upper range while maintaining clean matte surfaces |
| Creality K1 / K1C | 215–225°C | 50–60°C | 80–150 mm/s | Use abrasion-resistant nozzle hardware; K1-class systems can start near the upper part of the SSSray range for higher-flow PLA-CF printing |
| Creality Ender-class open-material printers | 210–215°C | 50–55°C | 50–60 mm/s | Use abrasion-resistant nozzle hardware and start at moderate flow; increase temperature only as needed for stable extrusion and layer bonding |
| Prusa MK4 / CORE One families | 215–225°C | 50–60°C | 60–120 mm/s | Use a hardened or ObXidian-type nozzle and keep the first layer clean and well bonded |
| Flashforge Adventurer 5M / Pro | 210–225°C | 50–60°C | 80–150 mm/s | Use an abrasion-resistant 0.4 or 0.6mm nozzle; higher speeds benefit from the upper end of the nozzle-temperature range |
| Anycubic Kobra-class open-material printers | 215–225°C | 50–60°C | 60–120 mm/s | Use abrasion-resistant nozzle hardware and start from the lower end before moving toward higher-flow production settings |
These are SSSray starting profiles for common printer families. Fine-tune by nozzle size, hotend flow, build surface and part geometry for the required surface and fixture performance.
Performance Characteristics
| Characteristic | Material Behavior | Production Reference |
|---|---|---|
| Surface Appearance | Matte, low-reflection oxblood red with fine carbon-fiber speckle | Useful where fixture families need visual identification without a glossy finish |
| Rigidity | Carbon-fiber-filled PLA is selected for a stiffer part feel than standard decorative PLA | Prioritize wall geometry and print orientation around bolts, clamps and pivots |
| Warping Behavior | Low warping under suitable PLA-CF settings and a stable first layer | Useful for flat fixture plates and holder bases on common FDM platforms |
| Layer Appearance | Fiber texture can reduce the visual prominence of layer lines | Moderate outer-wall speed improves consistency on customer-facing parts |
| Nozzle Wear | Carbon-fiber filler is abrasive | Use hardened / abrasion-resistant nozzle hardware for repeated production |
| Heat Capability | PLA-based thermal behavior with better stiffness than standard decorative PLA | Best for room-temperature tooling; use a higher-temperature engineering composite for sustained elevated-temperature service |
| Electrical / ESD Function | Standard PLA-CF is a mechanical composite, not an ESD-grade formulation | For static-sensitive electronics work, select an SSSray ESD filament with defined surface-resistance specifications |
Applications
| Application Focus | Practical Notes |
|---|---|
| PCB Positioning Fixtures | For mechanical alignment, inspection and assembly positioning at normal shop-floor temperatures; use an SSSray ESD-grade material for static-sensitive electronics work |
| Adjustable Holders | Well suited to thumb knobs, captured nuts, pivot bolts and slotted adjustments with reinforced walls around loaded holes |
| Assembly Jigs | Matte color and low warping make the material practical for repeatable workstation aids and locator components |
| Inspection Fixtures | Oxblood red can help visually separate fixture families, stations or project revisions in a production environment |
| Brackets & Mounting Aids | Suitable for rigid indoor brackets, sensor holders and non-high-heat supports with load-oriented print direction |
| Prototype Workholding | Useful for iteration of clamp bodies, support cradles and positioning aids before machining or final material selection |
Storage Guide
- Keep unopened spools in the original vacuum-sealed bag until use
- Reseal opened filament with fresh desiccant after printing
- Store away from direct sunlight, heat sources and humid workshop air
- Dry at 60°C for 4–6 hours after moisture exposure or before critical production
- For repeat production, keep the active spool in a low-humidity dry box or sealed feeder path where practical
OEM / ODM Services
We support distributors, wholesalers, private-label brands, importers and industrial sourcing teams with neutral packaging, custom labels, branded cartons, product-family color planning, custom spool options and project-based OEM / ODM coordination. For this Oxblood Red PLA-CF SKU, we can also align the labeling language and application positioning around fixture, jig and workholding programs so the finished retail or industrial package matches your target channel.
MOQ Reference: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.
Quality Control
- Diameter and tolerance control against the confirmed 1.75mm ±0.03mm specification
- Color and matte-surface consistency review against the approved Oxblood Red reference
- Winding appearance and spool-condition inspection before packing
- Vacuum seal and desiccant inclusion check for finished units
- Batch traceability and order-consistency review for repeat B2B programs
- Final carton, label and shipment-preparation check against the approved order specification
Technical & Compliance Documentation
- PLA-CF TDS is available in the SSSray Technical Documents Center
- PLA-CF SDS is available in the SSSray Technical Documents Center
- RoHS, REACH, CE, SGS or other market documents are only quoted when they are valid for the exact SKU, batch or project scope
- Send us the destination market and customer document checklist with your inquiry, and we will include the applicable market-specific files with the quotation package
Frequently Asked Questions
What is the MOQ for Oxblood Red PLA-CF?
Neutral packaging starts from 50 rolls. OEM packaging programs typically start from 500–1,000 rolls depending on label, carton, spool and customization scope.
Is this PLA-CF suitable for PCB fixtures?
Yes. It is designed for mechanical positioning fixtures, inspection jigs, assembly holders and similar room-temperature tooling. For static-sensitive electronics work, choose an SSSray ESD-grade filament with defined surface-resistance performance.
What nozzle should be used for this carbon-fiber PLA?
Use a hardened or otherwise abrasion-resistant nozzle. A 0.6mm nozzle is preferred for production reliability, while a hardened 0.4mm nozzle is suitable when finer fixture detail is required.
What is the recommended printing temperature?
Start at 210–230°C nozzle temperature and 50–60°C bed temperature. For higher-flow printing, move toward the upper end of the nozzle range while monitoring surface finish and extrusion consistency.
Can this filament be used for adjustable holders with screws and pivot bolts?
Yes. Increase wall count around holes, use suitable clearances, and consider inserts or captured nuts for repeated tightening. Orient the part so critical pivot or clamp loads do not rely only on Z-layer adhesion.
Can SSSray provide OEM or private-label packaging?
Yes. We support custom labels, branded boxes, spool options, color programs and private-label coordination for B2B orders.
Are samples available before a bulk order?
Verified B2B buyers can request up to 3 complimentary sample spools for material and printer qualification.
What technical or compliance documents can be supplied?
PLA-CF TDS and SDS are available in our Technical Documents Center. For market-specific compliance needs, send us the destination country and document checklist and we will include the applicable files with the quotation package.
Source Oxblood Red PLA-CF for Fixtures & Workholding
Send us your target market, annual volume, packaging format, printer platform and fixture requirements. We can prepare bulk pricing, sample qualification and an OEM / ODM plan around this Oxblood Red PLA-CF specification.



