Home » 3D Printer Filament Product Catalog » PA12-CF 25% Matte Black Filament
PA12-CF Functional Parts Series | 25% Carbon Fiber | Industrial OEM / ODM

SSSray Matte Black Nylon 12 3D Printer Filament for Mounting Frames – PA12-CF 25% Carbon Fiber, 1.75mm (filamen nilon gentian karbon)

Print rigid mounting frames, radial ribs and precision fixtures with our custom 25% carbon-fiber-reinforced Nylon 12 filament in a deep, low-sheen matte black finish.

We manufacture this high-fiber PA12 grade for industrial FDM parts where defined mounting geometry, stable feed and a clean technical appearance matter. SSSray combines 1.75mm ±0.03mm diameter control, consistent winding, vacuum packing and export-ready OEM supply to support your engineering-material portfolio.

Batch-Oriented Supply
7-15 Days Lead Time
FOB Ningbo / EXW
Up to 3 Sample Spools
25% Carbon Fiber Moisture-Controlled Packing Hardened Nozzle Required Engineering-Grade Nylon 12 Lot-Traceable Production
MaterialPA12-CF, 25% CF
SeriesPA12-CF Functional Parts
Color EffectMatte Black / Opaque
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Nozzle Temp270–290°C recommended
Bed Temp70–90°C recommended
Print Speed40–90 mm/s recommended
PackagingVacuum + Desiccant
Spool TypePlastic Spool

MOQ: Neutral packaging from 50 spools; semi-custom logo labels from 300 spools; fully custom packaging from 1,000 spools.

Lead Time: Standard 7–15 days; customized orders typically 15–25 days.

Product Overview

We manufacture SSSray PA12-CF 25% Matte Black for industrial buyers producing rigid mounting frames, ribbed supports and assembly fixtures. Its Nylon 12 matrix and 25% carbon-fiber reinforcement give designers a stiffness-focused material for precise, functional FDM/FFF geometry. The filament produces deep neutral black parts with subtle charcoal undertones, an opaque, finely textured matte surface and no metallic sparkle. This low-sheen finish complements radial ribs, mounting flanges, rectangular brackets and camera supports while maintaining a consistent industrial appearance across visible assemblies.

Our standard 1.75mm filament is controlled to ±0.03mm and supplied on a 1kg net plastic spool, vacuum sealed with desiccant. For continuous production, we recommend a hardened 0.6mm nozzle, a high-temperature all-metal hotend and dry-filament feeding. SSSray supports neutral orders from 50 spools, semi-custom logo labels from 300 spools and fully custom packaging from 1,000 spools, including barcodes, export cartons and replenishment planning. Send us your mounting-frame drawings, printer configuration and purchasing forecast; our team will prepare a focused sample and bulk supply proposal.

Why This Product Stands Out

We engineer our proprietary 25% carbon-fiber PA12 for rigid radial-rib mounting frames, broad support flanges and repeatedly fastened fixtures. Carbon-fiber reinforcement supports high stiffness and reduced thermal dimensional change compared with unfilled PA12, while the Nylon 12 matrix offers lower moisture sensitivity than conventional PA6-based nylon. We pair the refined charcoal-black matte finish with 1.75mm ±0.03mm diameter control, practical hardened 0.6mm nozzle guidance and moisture-protected 1kg spools for dependable factory-direct supply.

Key Selling Points

Stable Diameter Control

Our 1.75 ±0.03mm diameter specification supports consistent feeding, defined material input and repeat-order production.

Smooth Extrusion

Our evenly wound, moisture-protected PA12-CF supports smooth extrusion through narrow frame walls and densely ribbed geometry when printed with a hardened hotend.

Functional Matte Black Finish

Opaque charcoal-black, low-sheen surfaces suit visible brackets, machine fixtures and technical housings.

25% Carbon-Fiber Reinforcement

A 25% carbon-fiber formulation gives your engineering portfolio a dedicated high-reinforcement choice for rigid mounting hardware and structural ribs.

Export-Oriented Supply

1kg moisture-protected spools, private labels and shipping coordination support industrial distributor programs.

OEM / ODM Ready

Choose neutral boxes, custom logo labels, branded cartons and project-based color or spool discussions.

Key Features

Feature Practical Buyer Benefit
PA12 Matrix + 25% Carbon FiberSpecify a stiffness-oriented composite for mounting frames, ribs and industrial fixtures
Matte Black, Opaque FinishCreate a consistent dark visual language for functional parts and private-label product lines
1.75mm / ±0.03mmSupport reliable spool-to-spool feeding and predictable extrusion setup across repeat orders
Hardened 0.6mm Nozzle WorkflowAccommodate abrasive fiber-filled feedstock and reduce restrictions caused by smaller orifices
Vacuum Bag + DesiccantSupport moisture control throughout storage and international freight
50-Spool Neutral MOQ / OEM OptionsIntroduce a specialized 25% CF nylon line with a practical entry quantity and scalable private-label packaging

Balanced Quality and Cost Efficiency

SSSray brings high-reinforcement Nylon 12 into your supply program with a clear commercial advantage: one factory-direct source for 1kg industrial spools, 50-spool neutral orders and OEM packaging at scale. For print farms and machine shops, on-demand frames and fixtures can streamline low-volume component sourcing and reduce inventories of application-specific brackets. For distributors, our distinctive matte black 25% CF grade creates a focused engineering-material offer backed by consistent packaging, repeat-order planning and responsive technical support. Share your volume forecast to receive a tailored bulk quotation.

How We Work

1
Requirement Review
2
Specification Confirmation
3
Sample Evaluation
4
Packaging Discussion
5
Production Scheduling
6
Inspection & Shipment

Material Comparison Guide

Material Reinforcement / Behavior Print Hardware Moisture / Heat Workflow Typical Use
PA12-CF 25%Carbon-filled nylon; stiffness-oriented, abrasive, matteHigh-temperature all-metal hotend; hardened nozzlePre-dry and print from dry storage; warping depends on geometryMounting frames, ribs, jigs, fixtures
Unfilled PA12Unreinforced nylon; higher flexibility than typical CF-filled gradesNylon-capable hotend; wear-resistant nozzle generally not required for fillerPre-dry; heated bed and adhesion controlClips, compliant components, impact-loaded housings
PETG-CFCarbon-filled PETG; lower print temperature than PA12-CFAbrasion-resistant nozzle; PETG temperature platformDry before printing; moderate bed heatBrackets and appearance-focused functional parts
PA6-CFCarbon-filled Nylon 6; moisture and thermal behavior differs by gradeHigh-temperature hotend; hardened nozzleRigorous drying; controlled chamber is often helpfulIndustrial tools and high-stiffness structural geometries

Technical Specifications

Product NameSSSray Matte Black Nylon 12 3D Printer Filament for Mounting Frames – PA12-CF 25% Carbon Fiber, 1.75mm (filamen nilon gentian karbon)
MaterialPA12 (Nylon 12) reinforced with 25 wt% carbon fiber
SeriesPA12-CF Functional Parts Series – 25% Carbon Fiber
Color / EffectDeep matte black; subtle charcoal undertones; opaque, non-metallic, fine-textured
Filament Diameter1.75mm standard; 2.85mm subject to manufacturing confirmation
Tolerance±0.03mm
Net Weight1kg (2.2 lbs); 3kg / 5kg customized on inquiry
Gross Weight1.3kg
Spool TypePlastic spool
PackagingVacuum sealed with desiccant
Recommended Nozzle0.6mm hardened steel or equivalent abrasion-resistant nozzle
Printer Compatibility1.75mm FDM/FFF printers with 290°C-class all-metal hotends, suitable beds, hardened extrusion path and dry-feed capability
Typical ApplicationsMounting frames, radial ribs, support brackets, assembly fixtures, custom jigs and industrial housings
OEM / ODMSupported
Technical DocumentationOur export team coordinates grade-matched specification, safety and market-entry documentation for custom PA12-CF 25% orders.

Recommended Print Settings

Parameter Recommended Settings / Usable Range
Recommended Nozzle Temperature270–290°C for reinforced-nylon printing with a hardened 0.6mm nozzle
Usable Nozzle Range260–300°C on compatible high-temperature hotends; select the setting for your extrusion volume and part geometry
Recommended Bed Temperature70–90°C with a nylon-compatible adhesion layer
Usable Bed Range60–100°C with appropriate build surface and enclosure conditions
Recommended Print Speed40–90 mm/s for mounting frames, brackets and functional fixtures
Usable Speed Range30–120 mm/s; use the upper range with a high-flow hotend, dry feed and suitable part geometry
Layer Height0.20–0.30mm with a 0.6mm hardened nozzle; 0.15–0.25mm with a tested 0.4mm nozzle
Cooling Fan0% on first layers; 0–15% for main walls, with targeted bridge cooling
Retraction – Direct Drive0.6–1.2mm at 20–30 mm/s; fine-tune to the hotend and feed path
Retraction – Bowden2–4mm at 20–30 mm/s; maintain a smooth feed path for stiff CF-filled filament
Wall Count3–5 walls for mounting frames; increase locally around fasteners
Infill20–30% for fit-check fixtures / 40–60% for stiffness-prioritized mounting structures
First Layer Speed15–25 mm/s
Bed AdhesionPA-compatible adhesive on suitable PEI or engineering build surface; use a brim for long, thin sections
Drying Before Printing80°C for 8–12 h; use a temperature-rated spool and dryer or transfer filament to a heat-rated spool
Printing EnvironmentEnclosed, stable-temperature printer preferred for larger frames; feed from an actively dry container

Print Optimization Guide

Item Guidance
Ribbed Mounting FramesAlign ribs with principal loads and avoid sharp rib-to-wall transitions; add fillets to reduce stress concentrations
Hole & Fastener AccuracyCalibrate holes and bosses on a coupon before printing a full fixture; use inserts or washers where load demands
Matte Surface FinishRun consistent outer-wall speed and keep the seam away from visible assembly surfaces
Bed AdhesionUse a compatible release/adhesion agent; add a 5–10mm brim on narrow feet and long rectangular frames
Moisture & ExtrusionDry before printing; popping, bubbles, fuzzy walls and weak bonds indicate that the feedstock needs attention
Fibers & Feed PathUse a hardened 0.6mm nozzle, smooth low-curvature routing and a dry box; inspect drive gears during long runs
Functional QualificationCheck XY/Z orientation, bolt torque, creep and service-temperature exposure on representative printed specimens

Printer Brand Starting Settings

Printer Brand Nozzle Bed Speed Notes
Bambu Lab X1 Carbon275–290°C80–100°C40–90 mm/sHardened 0.6mm nozzle, dry external feed and PA-compatible plate adhesive
Prusa CORE One L+270–285°C75–90°C35–70 mm/sAbrasion-resistant nozzle and enclosed print environment; standard hotend ceiling is 290°C
Creality K1C270–285°C80–95°C40–85 mm/sHigh-temperature hotend, wear-resistant nozzle and a bed setting no higher than 100°C
Creality K1 Max270–285°C80–95°C40–90 mm/sHardened nozzle and abrasion-resistant drive path; bed setting no higher than 100°C
Raise3D E2CF270–290°C75–90°C40–80 mm/sCarbon-fiber-ready extrusion system, hardened 0.6mm nozzle and dry-filament feed

We recommend dry feeding, a hardened nozzle and material-specific flow calibration for consistent frame geometry. Keep nozzle and bed temperatures within the limits of your actual printer configuration.

Performance Characteristics

Characteristic Material / Production Reference Practical Interpretation
Fiber ReinforcementCustom 25% carbon fiber PA12 formulationSuited to stiffness-oriented frame ribs, bolt bosses and rigid mounting geometry
Surface AppearanceDeep matte black / opaque / low-sheenGood for exposed radial ribs, black brackets and fixture assemblies
Diameter Control1.75mm ±0.03mm specified toleranceUseful for incoming lot checks and extrusion setup records
Moisture ResponseHygroscopic nylon compositePre-dry and feed dry to limit bubbles and inconsistent weld lines
Nozzle WearAbrasive carbon-fiber filler; hardened 0.6mm nozzle recommendedPlan maintenance and wear-resistant spares for production runs
Frame Design GuidanceReinforced ribs, local wall count and print orientationOur technical team helps you align mounting-frame geometry with the printing process and intended assembly

Applications

Application Focus Printed-Part Design Focus Practical Notes
Radial-Rib Mounting FramesRib-to-hub transitions and bolt bossesPrint orientation and local wall count affect joint strength; test assembly loads
Rectangular Support FramesLong spans, corner stiffness and flat seating facesAdd corner fillets and brim support to improve edge hold and frame geometry
Assembly Jigs & Inspection FixturesRepeatable geometry and fixture mountingValidate fit and repeatability over actual shop conditions
Robotics & Camera MountsStiffness-to-weight and vibration exposureUse reinforcement in load paths and check fatigue-sensitive connections
Industrial Equipment HousingsOpaque matte appearance and mounting featuresVerify temperatures, chemical exposure and clearance requirements before use

Storage Guide

  • Keep sealed stock dry, away from sunlight and prolonged high-humidity exposure.
  • Dry before production at 80°C for 8–12 hours using a heat-rated spool and dryer.
  • During printing, feed from a dry box or conditioned enclosure; monitor for popping, stringing and bubbles.
  • After every run, reseal promptly with fresh desiccant and label the opened lot for traceability.
  • Avoid tight feed-path bends and high-heat storage; CF-filled nylon is stiff and plastic spool heat tolerance must be checked.

OEM / ODM Services

We manufacture custom PA12-CF 25% for industrial filament distributors and private-label importers who want a differentiated high-reinforcement nylon line. Choose neutral packaging, custom logo labels, branded boxes, export carton identification, barcodes, tailored spool formats or project-based color matching. Our team handles sample spools, diameter specifications, printer guidance and packaging artwork directly with your purchasing department.

MOQ Reference: Neutral packaging from 50 spools; semi-custom logo labels from 300 spools; fully custom packaging from 1,000 spools. Custom 2.85mm, 3kg and 5kg formats require a feasibility and production-quantity review.

Quality Control

  • Incoming PA12 and carbon-fiber feedstock identity and formulation control
  • 1.75mm / ±0.03mm diameter and ovality inspection checkpoints
  • Spool winding tension, flange clearance and visible strand condition review
  • Lot-linked extrusion setup and sample-print check of surface and feeding behavior
  • Vacuum bag seal, desiccant inclusion and packaging label verification
  • Final carton count, order traceability and shipping-document review

Technical Documents & Compliance Support

  • Custom-grade specifications: We coordinate the dimensional, handling and processing information required for your PA12-CF 25% purchasing program.
  • Safety documentation: Our team prepares the SDS documentation scope for the agreed custom formulation and destination market.
  • RoHS / REACH support: We coordinate market-specific material testing and documentation requests within the agreed project scope.
  • Third-party testing: We support customer-defined laboratory methods and reporting arrangements for custom engineering grades.
  • Export documentation: Send your import-market checklist with the inquiry; we organize the applicable technical and shipping documents alongside your order.

Frequently Asked Questions

What is the MOQ for PA12-CF 25% in matte black?

We accept neutral-packaging programs from 50 spools. Semi-custom packaging with your logo labels starts at 300 spools, while fully custom branded packaging starts at 1,000 spools. We confirm the final specification against your artwork, spool and carton requirements.

Which printers can run this 25% carbon-fiber nylon?

Use a 1.75mm FDM printer with a 290°C-class all-metal hotend, an abrasion-resistant nozzle, a nylon-compatible build surface and a dry-feed arrangement. Suitable hardware configurations include Bambu Lab X1 Carbon, Prusa CORE One L+, Creality K1C and Raise3D E2CF. Confirm your machine’s actual hardware limits and profile first.

Is PA12-CF 25% appropriate for mounting frames and ribbed brackets?

Yes, these are our target applications. Focus on rib orientation, bolt-hole design, wall thickness and stress concentrations. Before using a printed mount in a safety-relevant or sustained-load assembly, validate strength, creep and operating temperature on the finished geometry.

Can you supply our branding or a different spool format?

Yes. We support neutral cartons, custom logo labels, branded boxes, barcode layouts and project-based spool options. The standard unit is 1kg on a plastic spool; 3kg, 5kg and 2.85mm requests go through production-feasibility review.

Can we test the material before placing a bulk order?

We offer paid sample orders of up to three spools for verified B2B buyers. Send us your printer model, nozzle size, frame dimensions and planned annual demand; our team will help you move from sample printing to repeat supply.

How does SSSray support technical qualification for this custom grade?

We formulate and print-test this proprietary PA12-CF 25% grade in-house. For qualified B2B projects, our technical team helps confirm purchasing specifications, printer settings and applicable safety and compliance documents while maintaining confidentiality of the custom formulation and internal test data.

How should we dry the filament and configure the print bed?

Dry at 80°C for 8–12 hours on a heat-rated spool and print directly from dry storage. Use a 70–90°C heated bed with a PA-compatible adhesion layer; adjust the build surface and brim to the frame’s footprint.

What lead time and payment terms do you offer?

Our standard orders have a 7–15 day lead time; customized orders run 15–25 days after order confirmation. Payment terms are T/T 30% deposit and 70% before shipment; PayPal is available for small trial orders. We quote EXW or FOB Ningbo.

Ready to Source PA12-CF 25% for Your Mounting-Frame Program?

Send our team your frame drawings, printer platform and estimated annual volume. We will prepare bulk pricing, sample options, private-label packaging and a shipment plan for your engineering-material program.