Home » 3D Printer Filament Product Catalog » Dark Slate Gray PPS-GF Filament
Engineering Composite Series | PPS-GF20 | B2B Supply

SSSray Dark Slate Gray PPS-GF Glass Fiber Composite Filament – filament PPS z włóknem szklanym for Electrical Junction Boxes & Motor Mounts

PPS-GF20 filament reinforced with 20% glass fiber for high-temperature FDM/FFF programs that require dimensional stability, chemical resistance and rigid part geometry without carbon-fiber reinforcement.

Built for screw-sealed enclosures, cable-gland housings, motor brackets, fixtures and heat-exposed mounting parts. Dark Slate Gray gives a deep charcoal technical finish with fine glass-fiber flecks rather than a metallic or carbon-fiber appearance.

Export-Oriented Supply
7-15 Days Standard Lead Time
FOB Ningbo / EXW
B2B Sample Support
High-Temperature PPS Matrix 20% Glass Fiber Vacuum + Desiccant OEM / ODM Batch QC Support
MaterialPPS-GF20 / 20% GF
SeriesEngineering Composite
Color EffectDark Slate Gray
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Nozzle Temp320-340°C
Bed Temp90-110°C
Production Speed50-120 mm/s
NozzleHardened 0.6mm Preferred
PackagingVacuum + Desiccant

MOQ: Neutral packaging from 50 spools; OEM packaging typically 500-1,000 spools.

Lead Time: Standard 7-15 days; customized orders typically 15-25 days.

Product Overview

SSSray Dark Slate Gray PPS-GF20 uses a semi-crystalline PPS matrix reinforced with 20% glass fiber for high-temperature FDM/FFF enclosures, brackets and mounting hardware. The formulation combines PPS thermal stability, chemical resistance and low moisture uptake with added stiffness and dimensional control from glass-fiber reinforcement, without the carbon-fiber appearance of PPS-CF. Dark Slate Gray is a deep cool charcoal, darker than Industrial Gray and lighter than Jet Black, with a soft matte surface and fine scattered glass-fiber glints.

We supply this PPS-GF20 for repeatable B2B production with controlled 1.75mm diameter, vacuum-sealed packaging and OEM/private-label options. Typical targets include screw-sealed junction-box bodies, cable-gland housings, sensor enclosures, ribbed motor mounts, heat-exposed fixtures and industrial brackets. For live-electrical or flame-regulated programs, send us the target standard, printed-wall requirement and destination market; we will prepare the corresponding material documents and samples for your pre-production testing.

Dark Slate Gray PPS-GF20 for Electrical Housings & Rigid Mounts

We developed this PPS-GF20 around high-temperature engineering parts with screw bosses, gland ports, lid seams, motor-flange bores and stiff rib geometry. The 20% glass-fiber reinforcement supports a rigid, dimensionally controlled structure, while the Dark Slate Gray surface stays visibly different from Jet Black PPS-CF and metallic-filled decorative materials. It gives distributors and industrial buyers a clearly defined PPS option for electrical-enclosure, motor-mount and heat/chemical-exposed component lines.

Key Selling Points

Stable Diameter Control

±0.03mm nominal tolerance supports consistent feeding and repeatable high-temperature production settings.

High-Temperature PPS Platform

Targets engineering parts that see more heat and chemical exposure than common PLA, PETG or ABS applications.

Glass-Fiber Reinforcement

Supports stiffness, edge definition and dimensional control in ribs, bosses, flanges and mounting features.

Dry Export Packaging

Vacuum sealing with desiccant helps protect filament condition through storage and international transit.

Export-Oriented B2B Supply

Suitable for distributors, industrial resellers, sourcing teams and private-label engineering-material lines.

OEM / ODM Ready

Supports custom labels, cartons, private-label programs, color matching and project-specific packaging options.

Key Features

FeaturePractical Buyer Benefit
PPS-GF20 Engineering CompositeAdds a 20% glass-fiber reinforced, high-temperature and chemically resistant PPS option to engineering filament portfolios
Dark Slate Gray Matte FinishCreates a restrained industrial appearance for electrical housings, mounts and fixtures
Glass-Fiber ReinforcementSupports stiffness and dimensional control in ribs, bosses, flange faces and bracket geometry
1.75mm / ±0.03mmSupports repeatable feeding in high-temperature open-material FDM systems
Vacuum Sealed with DesiccantHelps protect filament condition through storage, export transit and engineering printing
OEM / Private Label SupportAllows distributors and industrial brands to build a differentiated engineering-material line

PPS-GF20 Supply for Engineering Filament Lines

We supply PPS-GF20 as a specialist engineering SKU for heat-exposed, chemical-contact and electrical-enclosure programs where PLA, PETG or standard ABS may fall outside the required material class. The 1kg format, controlled B2B supply terms, sample support and OEM options give distributors and private-label buyers a practical way to add a focused high-temperature composite to their engineering range. Buyers expanding a reinforced-material line can also review our Wholesale Glass Fiber Reinforced Filament program, while application-specific high-temperature projects can be handled through our Custom Engineering 3D Printing Filament service.

How We Work

1
Application Review
2
Grade & Document Match
3
Sample & Printer Test
4
Color & Packaging Approval
5
Production & Batch QC
6
Inspection & Shipment

Material Comparison Guide

MaterialReinforcement / BehaviorTypical Print ConditionMoisture / Electrical NoteTypical Use
PPS-GF20PPS reinforced with 20% glass fiber; stiff, dimensionally stable engineering compositeHigh-temperature hotend; wear-resistant nozzle; controlled bed/chamber preferredLow PPS moisture uptake; non-carbon reinforcement; use the PPS-GF20 electrical data supplied with the project when electrical performance is part of the designElectrical housings, motor mounts, fixtures, heat/chemical-exposed brackets
PPS-CFCarbon-fiber reinforced PPS; high stiffness with carbon-fiber surfaceHigh-temperature hotend; hardened nozzle; enclosed process commonly usedLow PPS moisture uptake; carbon reinforcement can change electrical behaviorHigh-stiffness tooling, structural brackets, heat-resistant industrial parts
PA-CFCarbon-fiber reinforced nylon; structural engineering compositeLower nozzle temperature than PPS; hardened nozzle; enclosure recommendedMore moisture-sensitive than PPS-based compositesJigs, fixtures, load-bearing brackets, machine components
PC / PC CompositePolycarbonate-based engineering material; tough with elevated heat resistanceHigh bed temperature and enclosure commonly requiredMoisture control important; electrical behavior depends on formulationFunctional housings, fixtures, impact-oriented parts

Technical Specifications

Product NameSSSray Dark Slate Gray PPS-GF Glass Fiber Composite Filament – filament PPS z włóknem szklanym for Electrical Junction Boxes & Motor Mounts
MaterialPPS-GF20; semi-crystalline Polyphenylene Sulfide (PPS) reinforced with 20% glass fiber
Glass Fiber Content20%
Product SeriesSSSray Engineering Composite Series – PPS-GF20 Dark Gray for Electrical Enclosures & Motor Mounting Parts
Color / EffectDark Slate Gray; deep cool charcoal-gray with soft matte surface and fine glass-fiber glints
Filament Diameter1.75mm standard; 2.85mm available on request
Tolerance±0.03mm
Net Weight1kg; 3kg and 5kg available on request
Gross Weight1.3kg
Spool TypePlastic spool
PackagingVacuum sealed with desiccant
Recommended NozzleWear-resistant nozzle; hardened steel 0.6mm preferred, 0.4mm minimum starting point
Printer RequirementOpen-material high-temperature FDM/FFF printer with all-metal hotend capable of the required PPS-GF20 process window
Typical ApplicationsElectrical enclosure programs, cable-gland housings, sensor housings, motor mounts, industrial brackets, jigs and fixtures
OEM / ODMSupported: labels, cartons, private label, color projects, custom spool and packaging options, and B2B line development

Recommended Print Settings

ParameterRecommended Guidance
Recommended Nozzle Temperature320-340°C
Usable Nozzle Range310-350°C usable process range; stay within printer and hotend limits
Recommended Bed Temperature90-110°C
Usable Bed Range80-120°C depending on build surface, part size and chamber condition
Recommended Print Speed50-120 mm/s
Usable Speed Range30-200 mm/s with flow, layer bonding and dimensional accuracy tuned to the part
Retraction – Direct Drive1-3mm at 20-40 mm/s starting range
Retraction – Bowden3-5mm at 20-40 mm/s starting range on a high-temperature filament path
Layer Height0.20-0.30mm preferred for 0.6mm nozzle; tune to nozzle diameter and surface target
Cooling Fan0-10%; start with fan OFF and add only the minimum required for geometry control
Wall Count3-5 perimeters for enclosure and bracket work
Infill20-30% for non-structural fixtures; 40-60% for higher-load mounting parts, then tune around the actual load case
First Layer Speed15-25 mm/s
Bed AdhesionSmooth or textured PEI with a compatible high-temperature adhesive/release layer where required
ChamberEnclosure recommended for larger or high-infill parts; 50-70°C is a practical starting range when active heating is available
Drying100°C for 8-10 hours after moisture exposure; verify spool heat resistance or respool before high-temperature drying
During PrintingDry-box feeding with fresh desiccant is recommended for long engineering prints

Print Optimization Guide

ItemGuidance
Nozzle WearGlass fiber is abrasive. Use a hardened steel, ruby or equivalent wear-resistant nozzle and monitor nozzle diameter over long production runs.
Dry Filament PathKeep the spool sealed before use and feed from a dry box for long jobs; surface moisture can reduce finish quality and extrusion consistency.
First-Layer ControlUse a clean PEI surface, slow first layer and a compatible adhesive/release layer; confirm removal behavior before large parts.
Large EnclosuresFor thick walls, high infill and large flat bases, use a stable heated enclosure to reduce thermal gradients and corner lift.
Bosses & ThreadsIncrease wall count around screw bosses and gland ports; validate pilot dimensions and thread engagement on the target hardware.
Ribs & Motor MountsOrient ribs and flange loads so critical stress is not concentrated across weak interlayer directions.
Electrical ProjectsFor live-electrical or flame-regulated programs, send us the target standard and wall-thickness requirement; we will prepare the PPS-GF20 material documents and sample set needed for your pre-production checks.
Post-ProcessingIf annealing is required, lock the cycle to the selected PPS-GF20 grade and the target part geometry before production.

SSSray-Tested Printer Starting Settings

Printer / ConfigurationNozzleBedChamberSpeedStarting Notes
Bambu Lab H2D330°C100°C60°C50-80 mm/sUse a hardened nozzle; 0.6mm preferred for stable glass-fiber composite production
Prusa CORE One L+ with HT Hotend335°C100°C60°C45-80 mm/sUse the HT hotend and abrasive-resistant nozzle; tune first-layer adhesion on the selected PEI sheet
Creality K2 Plus330°C100°C60°C50-80 mm/sUse a hardened nozzle and stable enclosure; tune flow before increasing speed
FlashForge Creator 4 with HS Extruder330°C100°C60°C40-70 mm/sUse the high-temperature HS configuration and wear-resistant nozzle
INTAMSYS FUNMAT HT330°C100°C70°C40-70 mm/sUse the enclosed high-temperature material workflow and tune for part geometry

These starting values come from SSSray PPS-GF20 print tests on the listed printer configurations. Fine-tune flow, first-layer adhesion and speed for your part geometry, surface target and production requirement.

Performance Characteristics

CharacteristicMaterial / Process BehaviorProduction Relevance
Thermal ProcessingHigh-temperature PPS-GF20 process window; 310-350°C usable rangeRequires a true high-temperature hotend rather than a standard desktop profile
Moisture BehaviorPPS absorbs less moisture than nylon families, but dry processing still improves consistencyReduces sensitivity during storage while keeping drying control important for production
ReinforcementGlass fiber increases nozzle abrasion and supports stiffness/dimensional controlUse wear-resistant tooling and maintain nozzle-condition checks in batch production
Electrical PositioningUnlike carbon-fiber reinforcement, the 20% glass-fiber reinforcement does not inherently create a conductive carbon network; use the PPS-GF20 electrical data supplied with the project for design checksSupports enclosure programs when electrical requirements, wall thickness and part design are defined before production
Chemical EnvironmentPPS material family is used for broad chemical and solvent resistanceRelevant to industrial housings, fluid-adjacent fixtures and chemically exposed mounts with media compatibility matched to the application
Surface AppearanceDark Slate Gray matte surface with fine glass-fiber flecksGives electrical and mechanical parts a restrained industrial finish without metallic or carbon styling

Applications

Application FocusPractical Notes
Electrical Junction BoxesBuilt for screw-sealed enclosure geometry, bosses and lid interfaces. For live-electrical or flame-regulated programs, send us the target standard and wall thickness; we will prepare the PPS-GF20 material documents and samples for your pre-production checks.
Cable-Gland HousingsWell suited to threaded ports and gland interfaces where heat, chemicals and rigid geometry matter; tune thread and sealing dimensions to the target gland hardware.
Motor Mounts & BracketsGlass reinforcement supports rigid ribs and flange geometry; tune print orientation, wall count and fastener interface around load direction, vibration and operating temperature.
Sensor & Control HousingsDark gray matte finish and PPS material behavior suit industrial electronics packaging when compliance requirements are defined.
Jigs & FixturesSuitable for production aids exposed to higher temperatures or chemicals than common desktop polymers.
Industrial Replacement PartsUseful for low-volume replacement components when dimensions, operating environment and load case are matched to the original requirement.

Storage Guide

  • Keep unopened spools in the original vacuum-sealed bag until printing or production use
  • After opening, store in a sealed dry box with fresh desiccant
  • For long prints, feed directly from a dry box to maintain stable filament condition
  • If moisture exposure is suspected, dry before printing using a heat-safe reel or respool when required
  • Keep away from dust, oils and shop contamination that can enter the high-temperature melt path

OEM / ODM Services

We support engineering-filament OEM / ODM programs for distributors, industrial resellers, private-label brands and sourcing teams. Available options include neutral packaging, custom labels, branded cartons, private-label line development, project-based color matching, custom spool and box options, and sample-to-production coordination for your target printer.

MOQ: Neutral packaging from 50 spools; OEM packaging typically 500-1,000 spools. Send us the target printer, end-use environment, required documents and packaging format, and we will prepare the sample, packaging and production plan before mass production.

Quality Control

  • Diameter and tolerance inspection against the confirmed production specification
  • Winding appearance and spool-condition inspection before packing
  • Color and surface-effect comparison against approved Dark Slate Gray reference
  • Vacuum-seal and desiccant inclusion check before carton packing
  • Batch traceability and retained production records for B2B follow-up; see our Batch QC Data for B2B workflow for documented quality support
  • Pre-shipment packaging, label and quantity review against the approved order

Technical Documents & Project Support

  • We provide TDS and SDS/MSDS for the PPS-GF20 grade supplied with your order
  • We provide the applicable RoHS / REACH declarations or reports for the selected PPS-GF20 SKU as part of the project document package
  • For projects requiring third-party test evidence, we match the report to the supplied PPS-GF20 grade or production batch
  • For finished-product projects with CE-related documentation requirements, send us the target requirement and we will prepare the relevant material-support documents
  • For electrical or flame-regulated programs, send us the target standard and destination market; we will prepare the PPS-GF20 document package and sample plan before production

Frequently Asked Questions

What is the MOQ for this PPS-GF20 filament?

Neutral packaging starts from 50 spools. OEM packaging typically starts from 500-1,000 spools depending on label, box, color and private-label requirements.

Can I print this PPS-GF20 on a standard desktop 3D printer?

Use a high-temperature open-material FDM/FFF printer with an all-metal hotend capable of the PPS-GF20 process window and a wear-resistant nozzle. Standard low-temperature hotends are not suitable for this material class.

Which nozzle should I use?

Use a hardened steel, ruby or equivalent wear-resistant nozzle because glass fiber is abrasive. A 0.6mm nozzle is preferred for production printing; 0.4mm is the practical minimum starting point.

Does the filament need drying?

Keep the filament sealed and dry. After moisture exposure, start with 100°C for 8-10 hours and confirm that the spool is heat-safe; otherwise respool to a suitable reel before drying.

Is Dark Slate Gray a metallic or carbon-fiber color?

No. It is a deep cool charcoal-gray with a soft matte finish. Fine scattered glints come from glass fiber, not metal powder or carbon fiber.

Can this PPS-GF20 be used for electrical junction boxes?

Yes. We developed it for enclosure and mounting projects including junction-box geometry, screw bosses and cable-gland housings. For live-electrical or flame-regulated programs, send us the target standard and wall-thickness requirement; we will prepare the PPS-GF20 material documents and samples for your pre-production checks.

Can SSSray provide OEM or private-label packaging?

Yes. We support custom labels, branded cartons, private-label programs, color projects and custom packaging options for B2B orders.

Are samples available before bulk production?

Verified B2B buyers can receive up to 3 complimentary sample spools for target-printer and application testing before volume production.

Need PPS-GF20 for an Electrical Enclosure or Motor-Mount Program?

Send us your target printer, part geometry, operating temperature, chemical exposure, electrical requirements and annual volume. We will prepare the sample, starting print settings, packaging and B2B supply plan around your production target.