SSSray PLA Silk Series | Rainbow Gradient | Wholesale & OEM / ODM

SSSray Silk PLA Rainbow Filament 1.75mm — 7-Color Gradient for Decorative 3D Printing (Райдужний шовковий PLA філамент)

A silk-finish rainbow PLA filament for floral sculptures, lotus décor, faceted display pieces and distinctive private-label product ranges.

A silk-finish PLA filament for FDM/FFF printing, with a fixed seven-color gradient along the filament. On a finished model, the colors visible depend on filament consumption, model geometry and print orientation.

1.75 mm / ±0.03 mm
7–15 Days Standard Lead Time
Neutral / Label MOQ: 50 Spools
Export-Oriented Supply | FOB Ningbo / EXW
Silk PLA Finish Rainbow Gradient Diameter ±0.03 mm Vacuum + Desiccant OEM / ODM Support
MaterialSilk PLA
Product SeriesRainbow Gradient Line
Color SequenceTeal → Blue → Violet → Magenta → Red → Orange → Golden Yellow → Teal
Filament Diameter1.75 mm
Diameter Tolerance±0.03 mm
Net Filament Weight1 kg
Gross Weight1.3 kg
Suggested Nozzle210–230 °C
Suggested Bed45–60 °C
Recommended Print Speed50–100 mm/s overall; up to 200 mm/s only after calibration on compatible high-flow systems. Keep visible outer walls at 25–40 mm/s when silk gloss is the priority.
PackagingVacuum + Desiccant
SpoolPlastic Spool

MOQ: Neutral packaging or simple brand-label application from 50 spools; full OEM packaging typically 500–1,000 spools.

Lead Time: Standard orders 7–15 days; customized orders 15–25 days.

Product Overview

At SSSray, we manufacture Silk PLA Rainbow for FDM/FFF printing with a reflective silk finish and a fixed seven-color gradient along the filament. The sequence is teal, blue, violet, magenta, red, orange and golden yellow, then back to teal. The colors visible on a finished model depend on filament consumption, model geometry and print orientation. Each spool contains 1 kg net filament on a plastic spool, with a 1.75 mm diameter and ±0.03 mm tolerance. We vacuum-seal each spool with desiccant; gross weight is 1.3 kg per packaged spool. From our factory in Jinhua, Zhejiang, we supply distributors, importers and private-label brands. Our team confirms label artwork and packing details against the approved order specification.

Why This Product Stands Out

SSSray’s Rainbow Gradient carries a seven-color sequence along the filament length. Our Red-Gold Dual-Color Silk PLA uses a two-color effect in one strand, so it creates a different visual pattern rather than the same lengthwise gradient. The reflective silk finish brings out curved petals, lotus forms and faceted display surfaces. Buyers building a coordinated Silk PLA range can also view our Blue-Green Dual Color Silk PLA.

How the Rainbow Gradient Appears in a Print

The color order is fixed in the filament: Teal → Blue → Violet → Magenta → Red → Orange → Golden Yellow → Teal. The printer and slicer do not select or randomize this sequence.

Changing print speed changes how quickly the filament passes through the hotend, not the color order. At a higher feed rate, a color transition reaches the nozzle sooner in elapsed time, but the same lengthwise sequence remains. The colors visible on a finished model depend on the total filament consumed, the model geometry and print orientation.

Key Selling Points

Seven-Color Lengthwise Gradient

The fixed sequence—teal, blue, violet, magenta, red, orange and golden yellow, then teal—runs along the filament. The portion visible on a finished model depends on filament consumption and model geometry.

Silk-Finish Surface

The reflective surface helps decorative contours, petals and faceted geometry catch the light.

±0.03 mm Diameter Tolerance

SSSray specifies a ±0.03 mm diameter tolerance, and our QC checks the filament against this specification.

Print Speed Guidance

Start at 50–100 mm/s overall. Compatible high-flow systems may be calibrated toward 200 mm/s after flow and temperature checks. Keep visible outer walls at 25–40 mm/s when silk gloss is the priority.

Vacuum-Sealed with Desiccant

Each spool is packed in a vacuum-sealed bag with desiccant to reduce moisture exposure before the package is opened.

Private-Label & OEM Supply

We support simple brand-label application and full OEM packaging, with the configuration confirmed against the approved order specification.

Key Features

Product FeatureSSSray Specification
Color SequenceSeven-color lengthwise sequence: teal → blue → violet → magenta → red → orange → golden yellow → teal.
Surface FinishReflective silk sheen for visible decorative surfaces, floral contours and faceted models.
Filament Diameter1.75 mm standard; stated diameter tolerance ±0.03 mm.
Spool Configuration1 kg net filament on a plastic spool; 1.3 kg gross weight per packaged spool.
Moisture ProtectionVacuum-sealed bag with desiccant in each unit.
Print Window210–230 °C nozzle; 45–60 °C bed; 50–100 mm/s recommended, with tuning toward 200 mm/s on compatible high-flow systems.
Wholesale & OEMSimple brand-label application and full OEM packaging options, subject to the approved order scope.

Wholesale Supply for Distributors & Private-Label Brands

SSSray supplies this Rainbow Gradient line to distributors and retailers building decorative PLA and Silk PLA assortments. The lengthwise sequence is visible across floral petals, curved surfaces and faceted models; the colors shown on each finished print depend on filament consumption, model geometry and print orientation.

Each spool contains 1 kg net filament in the 1.75 mm format. Our team confirms the brand label, retail carton and packing configuration against the approved order before production.

How We Work

1
Requirement Review
2
Specification & Artwork Confirmation
3
Sample Evaluation
4
Packaging & Order Approval
5
Production & Quality Checks
6
Final Packing & Shipment

Material Comparison Guide

MaterialSurface / Material BehaviorTypical Printing ConditionsTypical Applications
SSSray Silk PLA RainbowReflective silk finish with a seven-color lengthwise gradient; intended for visible decorative surfaces.Suggested nozzle 210–230 °C; bed 45–60 °C; active part cooling; 50–100 mm/s recommended speed.Floral sculptures, lotus décor, faceted keepsake boxes, ornaments and display pieces.
Standard PLA / PLA+Surface appearance depends on grade and finish; PLA+ formulations vary in toughness and flow characteristics.Typical PLA profiles use lower-to-moderate nozzle temperatures and active cooling; follow the selected grade’s profile.Prototypes, models, classroom projects and general-purpose non-heat-critical parts.
PETGTenacious material with greater flexibility and temperature resistance than standard PLA in many formulations; can string and adhere strongly to some build plates.Typically higher nozzle and bed temperatures than PLA; commonly around 230–250 °C nozzle and 70–90 °C bed.Holders, brackets, enclosures and functional parts requiring greater toughness.
ABS / ASAEngineering-oriented thermoplastics with higher heat resistance; shrinkage and warping require more controlled printing conditions.Typically high nozzle and bed temperatures; an enclosure is recommended for many larger parts.Mechanical parts, housings and, for ASA, outdoor parts requiring UV resistance.

Material behavior varies by formulation, printer and model geometry. SSSray positions this Silk PLA for decorative and non-heat-critical models, not load-rated engineering parts.

Technical Specifications

Product NameSSSray Silk PLA Rainbow — 1.75 mm Multicolor Gradient 3D Printer Filament
MaterialPLA Silk (Polylactic Acid) with a silk-finish formulation
Product SeriesSSSray PLA Silk Series – Rainbow Gradient Line for Floral Décor & Faceted Display Pieces
Color EffectFixed seven-color lengthwise sequence: teal → blue → violet → magenta → red → orange → golden yellow → teal
Filament Diameter1.75 mm standard; 2.85 mm only for selected products or by confirmed request
Diameter Tolerance±0.03 mm
Net Filament Weight1 kg per spool
Gross Weight1.3 kg per packaged spool
Spool TypePlastic spool
PackagingVacuum-sealed bag with desiccant
Printing TechnologyFDM / FFF
Printer CompatibilityMost open-material 1.75 mm FDM/FFF printers, subject to spool fit and printer-specific profile calibration
Typical ApplicationsFloral sculptures, lotus décor, faceted keepsake boxes, ornaments, giftware and display models
OEM / ODMFactory-direct support for simple brand-label application and full OEM packaging configurations
Technical DocumentsRequest the current SKU-specific TDS and SDS/MSDS from the SSSray sales team

Recommended Print Settings

ParameterRecommended Starting ValuePractical Adjustment Range
Nozzle Temperature210–230 °C200–240 °C; tune for gloss, layer bonding and extrusion flow
Heated Bed45–60 °C35–60 °C; select the setting for the build plate and adhesion method
Print Speed50–100 mm/s50–200 mm/s after flow calibration on compatible high-flow printers; control outer walls for silk gloss
Outer-Wall Speed25–40 mm/s20–45 mm/s; lower speeds generally retain a stronger visible silk sheen
Retraction – Direct Drive0.8–1.0 mm at 25–35 mm/s0.5–1.2 mm at 20–40 mm/s
Retraction – Bowden4–5 mm at 30–40 mm/s3–6 mm at 25–40 mm/s
Layer Height (0.4 mm Nozzle)0.16–0.20 mm0.12–0.28 mm
Part Cooling Fan80–100% after the initial layers60–100%; use higher cooling for bridges and overhangs
Wall Count2–3 walls2–4 walls according to model purpose
Infill15–20% for decorative models40–60% for heavier non-critical parts
First-Layer Speed20–30 mm/s15–30 mm/s according to plate condition and first-layer result
Build PlateClean PEI or compatible textured PEISmooth PEI, satin PEI or glass with a suitable adhesion aid

For this SKU, use 50–100 mm/s as the overall starting range. Keep visible outer walls around 25–40 mm/s for silk gloss. Test speeds toward 200 mm/s only on compatible high-flow systems after checking flow, temperature and layer bonding. First-layer speed and retraction speed are separate slicer settings and should not be confused with overall print speed.

Print Optimization Guide

Print VariableSSSray Printing Guidance
Silk Surface GlossKeep visible outer walls around 25–40 mm/s. Use higher speeds on internal paths only after confirming the finish on a representative model.
Temperature CalibrationStart near 215 °C within the 210–230 °C recommended window; fine-tune for silk sheen, layer bonding and extrusion consistency.
Gradient PresentationColor changes follow filament length. The visible sequence on a model depends on filament consumption, model geometry and print orientation.
Fine Floral DetailsUse a 0.12–0.16 mm layer height and moderate outer-wall speed for petals, veins and small decorative contours.
Faceted SurfacesA 0.16–0.20 mm layer height provides a practical starting point for crisp planes and display-box edges.
First-Layer AdhesionClean the build plate, confirm Z-offset and begin at 20–30 mm/s before raising the remaining print speed.
Stringing or Moisture SignsCheck filament storage condition, nozzle temperature and retraction together; change one variable at a time.
Higher Infill PartsUse 40–60% infill only where the design needs added mass or rigidity; do not position Silk PLA as a load-rated engineering material.

Printer Brand Starting Settings

Printer EcosystemNozzleBedPrint SpeedSetup Notes
Bambu Lab (A1 / P1 / X1)210–230 °C45–55 °C50–100 mm/sBambu Lab’s PLA Silk+ TDS lists 210–240 °C nozzle temperature, 35–45 °C bed temperature (with glue) and a print speed below 250 mm/s for Bambu filament. These are Bambu’s settings, not SSSray’s; use the SSSray starting values shown here and tune flow before testing toward 200 mm/s.
Prusa (MK / MINI Series)210–225 °C50–60 °C50–100 mm/sUse a clean compatible PEI sheet; keep visible outer walls at 25–40 mm/s for gloss.
Creality (Ender / K1 / CR Series)210–230 °C45–60 °C50–100 mm/sFor Bowden systems, begin near 4–5 mm retraction; for direct drive, begin near 0.8–1.0 mm.
Anycubic (Kobra Series)210–230 °C45–60 °C50–100 mm/sCheck spool clearance and tune cooling for bridges and small petals.
Flashforge (Adventurer / Creator Series)210–230 °C45–60 °C50–100 mm/sConfirm the filament path and spool-holder fit; tune flow before using high-speed settings.

Brand rows are SSSray starting references, not factory presets for every printer. Bambu Lab’s published PLA Silk+ values describe Bambu’s own filament, not a guaranteed SSSray profile. Printer firmware, hotend flow, build plate, slicer limits and model geometry determine the final settings.

Performance Characteristics

Product AttributeSpecified / Practical ReferenceProduction or Use Note
Filament Diameter1.75 mmStandard desktop FDM filament format.
Diameter Tolerance±0.03 mmOur QC team checks filament diameter against the specified ±0.03 mm tolerance.
Surface AppearanceSilk-finish reflective surfaceOuter-wall speed and temperature influence the final visible sheen.
Color PatternSeven-color lengthwise sequence: teal → blue → violet → magenta → red → orange → golden yellow → tealColor distribution on each model depends on extrusion length, model height and geometry.
Spool Net Weight1 kgNet filament weight per spool.
Packaging ReferenceVacuum-sealed bag + desiccantKeep the unit sealed until use and reseal after opening.
Material PositioningDecorative PLA-based filamentSSSray positions this material for visual models and non-heat-critical applications, not load-rated parts.

Application Scenarios

Application FocusPractical Notes
Floral Sculptures & Lotus DécorPetal contours and curved surfaces reveal the reflective finish and successive gradient colors.
Faceted Keepsake & Jewelry BoxesAngled planes catch highlights; color transitions create a distinctive gift and display presentation.
Decorative Vases & OrnamentsUse the color sequence as a visual feature on non-functional display objects.
Giftware & Personalized DécorSuitable for small-batch custom designs where color variation is part of the product concept.
Creative Retail CollectionsSupports themed product bundles, seasonal display items and online listings with finished-print imagery.
Education & Maker ProjectsProvides a visible example of FDM layer construction, color change and surface-finish variation.

Storage Guide

  • Keep the filament in its vacuum-sealed bag until it is ready for use.
  • After opening, return the spool to a sealed bag or dry storage box with desiccant.
  • Store in a cool, dry location away from direct sunlight and heat sources.
  • Keep the filament protected from prolonged exposure to humid room air.
  • If moisture-related stringing, popping or surface defects appear, check the filament condition and confirm a suitable drying cycle before printing.

OEM / ODM Services

SSSray works with distributors, importers, wholesalers and private-label brands building decorative PLA ranges. Simple brand-label application is available from 50 spools. Full OEM packaging can include retail carton artwork, barcode and language-label layouts, packaging configuration and spool presentation, and is typically arranged for 500–1,000 spools. Our sales team confirms the project scope and quotation against your packaging brief.

Quality Control

  • Diameter control: we check the 1.75 mm filament against the specified ±0.03 mm tolerance.
  • Surface and color inspection: we review silk sheen, visible surface condition and the approved seven-color sequence.
  • Spool winding inspection: we check winding alignment, loose loops and handling presentation.
  • Net-weight verification: we verify the 1 kg net filament quantity for each spool.
  • Moisture-protection packing: we inspect the vacuum seal and confirm desiccant inclusion in each unit.
  • Pre-shipment inspection: we cross-check order quantity, carton labels and export packing details before dispatch.

For B2B orders, SSSray can align sampling frequency, inspection records and batch-release requirements with the approved purchase specification.

Technical Documents & Compliance

Document TypeSSSray Supply Support
Technical Data Sheet (TDS)We provide the current SKU-specific TDS for product qualification and print-profile review.
Safety Data Sheet (SDS / MSDS)We provide the applicable SDS/MSDS for your purchasing, warehouse and material-handling teams.
Regulatory Declarations / Test ReportsOur team checks available reports against the exact material, product scope and destination-market requirement before including them in the order file.

Send us your destination market and document checklist. SSSray will match the available document revision and product scope to your project before order approval.

Frequently Asked Questions

What is the MOQ for SSSray Silk PLA Rainbow?

Neutral packaging or simple brand-label application is available from 50 spools. Full OEM packaging is typically arranged for 500–1,000 spools, depending on the selected packaging and customization scope.

What colors are included in the Rainbow Gradient?

The fixed sequence is teal, blue, violet, magenta, red, orange and golden yellow, then back to teal. It runs along the filament length; the colors visible on a finished model depend on filament consumption, model geometry and print orientation. Print speed does not change the color order.

Which printers can use this 1.75 mm filament?

It is designed for most open-material 1.75 mm FDM/FFF printers, including common Bambu Lab, Prusa, Creality, Anycubic and Flashforge systems. Confirm spool-holder clearance and calibrate the slicer profile on the target printer.

What print settings should I start with?

Start at 210–230 °C nozzle temperature, 45–60 °C bed temperature and 50–100 mm/s overall print speed. On compatible high-flow printers, test toward 200 mm/s only after flow and temperature calibration. Keep visible outer walls around 25–40 mm/s when silk gloss is the priority.

Can SSSray supply samples?

Qualified B2B buyers may apply for up to 3 complimentary sample spools after project review. Sample eligibility, available colors and freight arrangements are confirmed by the sales team.

Can I add my brand to the packaging?

Yes. Simple brand-label application is available from 50 spools. Full OEM packaging, such as custom retail cartons and a complete branded package, is typically arranged for 500–1,000 spools. Custom spool options are confirmed separately against the project specification.

Which technical documents can I request?

Ask our sales team for the current SKU-specific TDS and SDS/MSDS. Regulatory declarations or third-party reports are supplied only when valid documents are available for the exact product and destination market.

What are the lead time and trade terms?

Standard orders are typically 7–15 days and customized orders 15–25 days. Trade terms are FOB Ningbo or EXW, with the final schedule confirmed against order quantity, packaging and production planning.

Source Silk PLA Rainbow for Your Decorative Filament Range

Send SSSray your target quantity, destination market and packaging requirements. Our team will review the specification, confirm sample options and prepare a wholesale or OEM / ODM quotation for your project.