Home » 3D Printer Filament Product Catalog » Espresso Brown PLA-CF Filament
PLA-CF Carbon Fiber Series | Wholesale Supply | OEM / ODM Support

SSSray PLA-CF 1.75mm Carbon Fiber 3D Printer Filament, Espresso Brown | 탄소섬유 PLA 필라멘트 | for Drone Frames & Tube Clamp Mounts

Matte espresso-brown carbon-fiber reinforced PLA for B2B filament programs, rigid functional parts, drone frame projects and bolted tube clamp mounts.

We supply this PLA-CF for buyers who want a stiff, low-reflection composite appearance without moving to the higher processing temperatures of nylon-based carbon-fiber materials. The dark coffee-brown tone stays visually distinct from standard black PLA-CF and gives functional parts a warmer industrial finish.

±0.03mm Diameter Control
7–15 Days Standard Lead Time
FOB Ningbo / EXW
B2B Sample Support
Hardened Nozzle Recommended TDS / SDS Support Vacuum + Desiccant OEM / ODM 1.75mm ±0.03mm
MaterialPLA-CF
SeriesSSSray PLA-CF Carbon Fiber Series
Carbon Fiber Content≥10%
Color EffectEspresso Brown Matte
Diameter1.75mm
Tolerance±0.03mm
Net Weight1kg
Gross Weight1.3kg
Nozzle Temp210–230°C
Bed Temp50–60°C
Print Speed60–150 mm/s
NozzleHardened ≥0.4mm
PackagingVacuum + Desiccant

MOQ: Neutral packaging from 50 rolls; OEM packaging typically 500–1,000 rolls.

Lead Time: Standard 7–15 days; customized orders typically 15–25 days.

Product Overview

SSSray Espresso Brown PLA-CF is a 1.75mm chopped-carbon-fiber reinforced PLA filament developed for B2B buyers who need a matte composite appearance, practical PLA-based processing and greater rigidity than unfilled PLA typically provides. Its color is a deep coffee-toned brown rather than black: low-reflection, single-color and visibly fibrous, with fine carbon-fiber flecks that give drone frame parts, tube clamp mounts, brackets and fixtures a controlled industrial finish. It is not wood-filled PLA and it does not use silk, metallic or gradient effects.

For wholesale and private-label programs, we supply standard 1kg plastic spools with ±0.03mm diameter tolerance, vacuum sealing and desiccant protection. The material is designed for most open-material 1.75mm FDM platforms equipped with a wear-resistant nozzle. For bolted clamps, vibrating assemblies and drone components, start with the recommended profile, then tune wall count, part orientation and temperature to the actual printer and load condition.

Key Selling Points

Espresso Brown Matte Finish

Dark coffee-brown color with low reflection, fine CF flecks and an even fibrous surface instead of a generic black composite look.

CF-Reinforced Rigidity

Chopped carbon fiber increases rigidity and improves dimensional stability for frames, mounts, jigs and fixtures.

Stable Diameter Control

Specified at ±0.03mm to support repeatable feeding and stable production from sample runs through repeat orders.

Practical PLA-CF Processing

Works in PLA-class temperature ranges while delivering the surface character and stiffness buyers expect from a carbon-filled material.

Export-Oriented B2B Supply

1kg standard format, vacuum packing, bulk order support and FOB Ningbo / EXW terms for distributors and importers.

OEM / Private Label Ready

Custom labels, retail boxes, carton marks, color programs and selected spool formats are available for distributor, wholesale and private-label programs.

Key Features

FeaturePractical Buyer Benefit
Carbon Fiber Content ≥10%Defines the reinforcement level for comparison with unfilled PLA and other composite grades.
Tensile Modulus (XY) 5,200–5,500 MPaGives buyers a quantified stiffness reference for brackets, mounts, jigs and fixtures.
HDT 62°C @ 0.455 MPaGives engineering buyers a clear, load-specific heat-deflection reference when comparing material grades.
±0.03mm Diameter ToleranceSupports repeatable feeding and profile consistency across sample and repeat production.
60°C × 4–6h Drying GuidanceSets a repeatable re-drying cycle when moisture symptoms appear before printing.
Vacuum-Sealed 1kg SpoolSupports moisture protection during storage, export handling and distribution.

Commercial Value of Espresso Brown PLA-CF

Espresso Brown adds a differentiated color to a distributor’s PLA-CF range while keeping the material within a familiar PLA-class printing workflow. The TDS-backed carbon-fiber content and stiffness figures give buyers concrete material information to present alongside the matte brown finish. For wholesale and private-label programs, we supply the standard 1.75mm / 1kg format and coordinate labels, retail boxes and carton marks for repeat orders.

Espresso Brown PLA-CF Supply Workflow

1
Application & Volume Details
2
Color & Specification Selection
3
Sample Print Testing
4
Packaging & Label Setup
5
Bulk Production
6
Final QC & Shipment

Material Comparison Guide

MaterialReinforcement / BaseSurface CharacterPrinting BehaviorNozzle RequirementTypical Use
PLA-CFPLA + chopped carbon fiberMatte, fine fibrous texturePLA-class temperatures; generally low warpingWear-resistant nozzle recommendedFrames, mounts, jigs, fixtures, rigid functional parts
Standard PLAUnfilled PLASmooth to satin, color dependentEasy processing and low warpingStandard nozzle normally suitablePrototypes, displays, general models
PETG-CFPETG + carbon fiberMatte to low-gloss composite textureHigher nozzle and bed temperatures than PLA-CFWear-resistant nozzle recommendedFunctional brackets, housings, fixtures
PA-CFNylon + carbon fiberMatte engineering textureHigher temperature and moisture-control requirementsWear-resistant nozzle requiredEngineering fixtures and higher-demand functional parts

Technical Specifications

Product NameSSSray PLA-CF 1.75mm Carbon Fiber 3D Printer Filament, Espresso Brown | 탄소섬유 PLA 필라멘트 | for Drone Frames & Tube Clamp Mounts
MaterialPLA-CF — polylactic acid filled with chopped carbon fiber
SeriesSSSray PLA-CF Carbon Fiber Series
Carbon Fiber Content≥10%
Tensile Modulus (XY)5,200–5,500 MPa (ISO 527-2 / ASTM D638)
HDT @ 0.455 MPa62°C (ISO 75-2 / ASTM D648)
Color / EffectEspresso Brown; dark coffee-toned brown, matte, low-reflection, fine carbon-fiber flecks, solid single color
Filament Diameter1.75mm standard; 2.85mm available on request for selected projects
Diameter Tolerance±0.03mm
Net Weight1kg standard; 3kg and 5kg options available on request
Gross Weight1.3kg for standard 1kg spool package
Spool TypePlastic spool
PackagingVacuum sealed with desiccant
Recommended NozzleHardened steel, tungsten carbide or equivalent wear-resistant nozzle; ≥0.4mm
Printer CompatibilityMost open-material 1.75mm FDM / FFF printers with a suitable wear-resistant nozzle and material profile
Typical ApplicationsDrone frame projects, tube clamp mounts, brackets, jigs, fixtures, camera mounts, robotics parts and rigid housings
OEM / ODMSupported for distributor, wholesale and private-label programs

Recommended Print Settings

ParameterRecommended Guidance
Recommended Nozzle Temperature210–230°C
Usable Nozzle Range190–245°C after flow and layer-bond calibration
Recommended Bed Temperature50–60°C
Usable Bed Range45–65°C depending on build surface and first-layer adhesion
Recommended Print Speed60–150 mm/s
Usable Speed Range40–250 mm/s; use the upper range with sufficient hotend flow, higher nozzle temperature and stable cooling
Nozzle Diameter / Material≥0.4mm wear-resistant nozzle; 0.6mm preferred for long CF production runs
Layer Height0.16–0.28mm; 0.20mm is a practical starting point with a 0.4mm nozzle
Cooling Fan80–100% after the first layers; reduce if layer bonding needs improvement
Direct Drive Retraction0.8–1.2mm at 30–40 mm/s starting range
Bowden Retraction2–4mm at 25–35 mm/s starting range; calibrate to the actual tube path
Wall Count3–4 perimeters for general functional parts; 4–6 for bolted clamps and frame components
Infill15–25% for display / light-duty parts; 40–60% for higher structural demand
First Layer Speed20–40 mm/s
Bed AdhesionSmooth or textured PEI; glue can be used on low-adhesion or unheated surfaces
Drying Guidance60°C for 4–6 hours when moisture symptoms appear; allow the spool to cool to room temperature before loading, then print from dry storage

Print Optimization Guide

ItemGuidance
Long Production RunsUse a 0.6mm hardened nozzle when practical to increase abrasion margin and reduce sensitivity to fiber-related clogging.
Espresso Brown SurfaceUse moderate outer-wall speed and stable cooling to keep the matte brown tone and carbon-fiber texture visually even.
Drone Frame PartsIncrease perimeter count and align the main load path with the part orientation; for vibration or impact use, print the final geometry in its intended orientation before bulk production.
Tube Clamp MountsUse 4–6 walls around bolt zones, avoid excessive tightening and verify hole clearance on the intended fastener set.
Stringing ControlDry exposed filament first, then tune retraction and travel before lowering temperature enough to weaken layer bonding.
Repeat-Order ProfileKeep the same nozzle, build plate, layer height and speed used for the approved sample so repeat orders can run from the same production profile.

SSSray-Tested Starting Profiles by Printer Brand

We tested these starting profiles with SSSray PLA-CF on the listed printer platforms using wear-resistant nozzles. The ranges below come from our print trials; fine-tune flow, cooling and first-layer setup for the installed hotend, build surface and part geometry before production.

Printer / PlatformNozzleBedSpeedStarting Notes
Bambu Lab X1C / P1S215–235°C50–60°C100–180 mm/sUse a hardened 0.4mm or 0.6mm nozzle; 0.6mm is preferred for sustained CF production.
Prusa MK4S / CORE One210–230°C50–60°C60–140 mm/sUse a wear-resistant nozzle and tune flow for the installed nozzle size and target surface finish.
Creality K1 / K1 Max215–235°C55–60°C100–180 mm/sUse a hardened nozzle; raise temperature toward the upper end as print speed and volumetric flow increase.
Anycubic Kobra 3210–230°C50–60°C80–160 mm/sUse a wear-resistant nozzle and tune temperature with speed to keep extrusion and the matte surface consistent.
ELEGOO Neptune 4 Pro210–230°C50–60°C70–150 mm/sUse a wear-resistant nozzle and tune retraction and flow for the installed hotend and filament path.

Start within these ranges, then fine-tune temperature, flow, cooling and retraction for the installed nozzle, build plate, model geometry and required surface finish.

Performance Characteristics

CharacteristicMaterial Behavior / ReferenceProduction Relevance
Diameter Control±0.03mm specified toleranceSupports repeatable feeding from sample printing through repeat orders
Surface AppearanceMatte, low-reflection espresso brown with fine CF flecksUseful when the printed surface is part of the finished product appearance
RigidityCarbon-fiber reinforcement typically increases stiffness versus unfilled PLAUseful for frames, mounts, jigs and parts where reduced flex is preferred
Warping BehaviorPLA-based processing with generally low shrinkage under stable first-layer conditionsReduces process complexity compared with many higher-temperature engineering composites
Nozzle WearCarbon fiber is abrasiveWear-resistant nozzle material is recommended for reliable production use
Heat ServicePLA base remains a lower-temperature polymer classFor higher heat or tougher service conditions, step up to PA-CF or PPA-CF in the SSSray engineering-material range

Applications

Application FocusPractical Notes
Drone Frames & Frame ComponentsSuitable for frames, guards, mounts and lightweight structural components where stiffness, dimensional stability and a matte finish are priorities.
Tube Clamp MountsWorks well for bolted clamp bodies and mounting adapters; use 4–6 walls around bolt zones and set hole clearance to the intended fastener.
Camera & Gimbal MountsLow-reflection brown surface and greater rigidity suit brackets, supports and accessory mounts.
Jigs & FixturesUseful for alignment aids, assembly fixtures and shop-floor tooling that do not require high-temperature polymer performance.
Robotics PartsSuitable for brackets, sensor mounts, covers and rigid functional components where a matte composite finish is preferred.
Industrial Display PartsMatte espresso-brown CF texture gives prototypes and finished display components a differentiated technical appearance.

Storage Guide

  • Keep unopened spools in the original vacuum-sealed package with desiccant until use
  • Reseal opened spools after printing and store them in a dry box or sealed container
  • When moisture symptoms appear, dry at 60°C for 4–6 hours in a filament dryer or convection oven; let the spool cool to room temperature before loading
  • Keep the spool away from direct sunlight and high-temperature storage areas
  • For repeat production, keep storage conditions consistent with the sample-print profile

OEM / Private-Label Supply for Espresso Brown PLA-CF

We manufacture Espresso Brown PLA-CF for distributors, wholesalers, importers and private-label brands building repeat-order carbon-fiber filament programs. Available options include neutral packaging, custom labels, retail boxes, barcode and carton marks, multilingual packaging, selected custom spool formats, color matching and coordinated multi-SKU product-line development.

Commercial reference: Neutral packaging starts from 50 rolls. OEM packaging is typically 500–1,000 rolls. Standard 1.75mm / 1kg is the primary format; selected 2.85mm, 3kg and 5kg formats are available according to order volume and production arrangement.

Espresso Brown PLA-CF Batch Control

  • Diameter tolerance monitoring against the confirmed ±0.03mm specification
  • Winding appearance and spool condition inspection before packing
  • Espresso Brown color and matte surface checked against the master production reference
  • Extrusion and sample-print checks using the production profile set for the order
  • Net-weight, vacuum-seal and desiccant packing check
  • Label, carton mark and shipment-configuration review before dispatch

Technical Documentation & Compliance

Document / ItemWhat We Provide
TDSWe provide the PLA-CF TDS for material qualification and specification review.
SDS / MSDSWe provide the PLA-CF SDS / MSDS for handling, storage and shipment documentation.
RoHS / REACHTell us your destination market and required compliance scope; we will confirm the applicable RoHS / REACH documents for the ordered PLA-CF grade.
Third-Party Test ReportsFor third-party testing, send us the required standard and test items; we will confirm the available report or testing arrangement for your order.

Frequently Asked Questions

What is the MOQ for Espresso Brown PLA-CF?

Neutral packaging starts from 50 rolls. OEM or private-label packaging is typically 500–1,000 rolls depending on label, box, spool and color requirements.

How is Espresso Brown different from standard black PLA-CF?

Espresso Brown is a dark coffee-toned brown with a matte, low-reflection surface and fine carbon-fiber flecks. It is a solid single color, not wood-filled PLA, and does not use silk, metallic or gradient effects.

Do I need a hardened nozzle for this filament?

Yes. Carbon fiber is abrasive, so a hardened steel, tungsten carbide or equivalent wear-resistant nozzle is recommended. A 0.4mm nozzle can be used; 0.6mm is preferred for long production runs when detail requirements allow.

What print settings should I start with?

Start around 210–230°C nozzle temperature, 50–60°C bed temperature and 60–150 mm/s. On high-flow systems, PLA-CF can be pushed toward 250 mm/s by increasing nozzle temperature and confirming stable extrusion, layer bonding and surface quality.

Is PLA-CF suitable for drone frames and tube clamp mounts?

Yes. It is well suited to drone frames, guards, mounts, brackets and tube-clamp components where stiffness, dimensional stability and a matte finish are priorities. For heavily loaded or vibration-exposed parts, print the final geometry in its intended orientation and tune wall count and infill to the actual load.

Can you provide OEM or private-label PLA-CF?

Yes. We support custom labels, retail boxes, carton marks, selected spool formats, color programs and private-label product development for distributor, wholesale and brand-owner orders.

Are samples and repeat-order lead times available?

Verified B2B buyers can apply for up to 3 complimentary spools for print testing. Standard bulk orders are typically 7–15 days; customized programs are typically 15–25 days after specification and artwork approval.

What technical or compliance documents can you provide?

We provide the PLA-CF TDS and SDS / MSDS for material qualification and safe handling. For RoHS, REACH or third-party testing, tell us your destination market and required scope; we will confirm the applicable documents for your order.

Source Espresso Brown PLA-CF for Your B2B Program

Send us your target market, printer platform, monthly volume and packaging requirement. We can arrange sample print testing, bulk pricing and an OEM / private-label supply plan for this Espresso Brown PLA-CF SKU.